• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.840-845
• /
• 2005

This paper presents a robust optimal design method for a periodic structure type of MEMS resonator that is vulnerable to mode localization. The robust configuration of such a MEMS resonator to fabrication error is implemented by changing the regularity of periodic structure. For the mathematical convenience, the MEMS resonator is first modeled as a multi pendulum system. The index representing the measure of mode variation is then introduced using the perturbation method and the concept of modal assurance criterion. Finally, the optimal intentional mistuning, minimizing the expectation of the irregularity measure for each substructure, is determined for the normal distributed fabrication error and its robustness in the design of MEMS resonator to the fabrication error is demonstrated with numerical examples.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.931-938
• /
• 2005

This paper presents a robust optimal design method for a periodic structure type of MEMS resonator that is vulnerable to mode localization. The robust configuration of such a MEMS resonator to fabrication error is implemented by changing the regularity of periodic structure For the mathematical convenience, the MEMS resonator is first modeled as a multi-pendulum system. The index representing the measure of mode variation is then introduced using the perturbation method and the concept of modal assurance criterion. Finally, the optimal intentional mistuning, minimizing the expectation of the irregularity measure for each substructure, is determined for the normal distributed fabrication error and its robustness in the design of MEMS resonator to the fabrication error is demonstrated with numerical examples.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1182-1188
• /
• 2010

This paper proposes a precise localization algorithm for a quickly moving mobile robot. In order to localize a mobile robot with active beacon sensors, a relatively long time is needed, since the distance to the beacon is measured using the flight time of the ultrasonic signal. The measurement time does not cause a high error rate when the mobile robot moves slowly. However, with an increase of the mobile robot's speed, the localization error becomes too high to use for accurate mobile robot navigation. Therefore, in this research into high speed mobile robot operations, instead of using two active beacons for localization an active beacon and dual compass are utilized to localize the mobile robot. This new approach resolves the high localization error caused by the speed of the mobile robot. The performance of the precise localization algorithm was verified by comparing it to the conventional method through real-world experiments.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.25-31
• /
• 2022

Moving among multiple floors is one of the most challenging tasks for indoor autonomous robots. Most of the previous researches for indoor mapping and localization have focused on singular floor environment. In this paper, we present an algorithm that creates a multi-floor map using 3D point cloud. We implement localization within the multi-floor map using a LiDAR and an IMU. Our algorithm builds a multi-floor map by constructing a single-floor map using a LOAM-based algorithm, and stacking them through global registration that aligns the common sections in the map of each floor. The localization in the multi-floor map was performed by adding the height information to the NDT (Normal Distribution Transform)-based registration method. The mean error of the multi-floor map showed 0.29 m and 0.43 m errors in the x, and y-axis, respectively. In addition, the mean error of yaw was 1.00°, and the error rate of height was 0.063. The real-world test for localization was performed on the third floor. It showed the mean square error of 0.116 m, and the average differential time of 0.01 sec. This study will be able to help indoor autonomous robots to operate on multiple floors.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.19-26
• /
• 2002

We have earlier developed a 40-channel SQUID system. An important figure of merit of a MEG system is the localization error, within which the underlying current source can be localized. With this system, we investigated the localization error in terms of the standard deviation of the coordinates of the ECDs and the systematic error due to inadequate modeling. To do this, we made localization of single current dipoles from tangential components of auditory evoked fields. Equivalent current dipoles (ECD) at N1m peak were estimated based on a locally fitted spherical conductor model. In addition, we made skull phantom and simulation measurements to investigate the contribution of various errors to the localization error. It was found that the background noise was the main source of the errors that could explain the observed standard deviation. Further, the amount of systematic error, when modeling the head with a spherical conductor, was much less than the standard deviation due to the background noise. We also demonstrated the performance of the system by measuring the evoked fields to grammatical violation in sentence comprehension.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1155-1160
• /
• 2007

This paper presents position error for the robot localization system using the ultrasonic wave. The distance between the receiver and a beacon can be computed by using the difference between times of flight. The distance information measured by ultrasonic wave has errors. The position is calculated by distances, and this error is caused by distance errors. The position error is different from receiver¡s position. And the position is also calculated by beacon location. This paper calculates worst case position error within measuring area, and finds beacons location to reduce the position error.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.368-373
• /
• 2010

A new indoor mobile robot localization method is presented. Robot recognizes well designed single color landmarks on the ceiling by vision system, as reference to compute its precise position. The proposed likelihood prediction based method enables the robot to estimate its position based only on the orientation of landmark.The use of single color landmarks helps to reduce the complexity of the landmark structure and makes it easily detectable. Edge based optical flow is further used to compensate for some landmark recognition error. This technique is applicable for navigation in an unlimited sized indoor space. Prediction scheme and localization algorithm are proposed, and edge based optical flow and data fusing are presented. Experimental results show that the proposed method provides accurate estimation of the robot position with a localization error within a range of 5 cm and directional error less than 4 degrees.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 추계학술발표대회
• /
• pp.829-832
• /
• 2010

Wireless Sensor Networks have been proposed for several location-dependent applications. For such systems, the cost and limitations of the hardware on sensing nodes prevent the use of range-based localization schemes that depend on absolute point to point distance estimates. Because coarse accuracy is sufficient for most sensor network applications, solutions in range-free localization are being pursued as a cost-effective alternative to more expensive range-based approaches. In this paper, we proposed a modified DV-Hop (range-free localization) algorithm which reduces node's location error and cumulated distance error by minimizing localization error. Simulation results have verified the high estimation accuracy with our approach which outperforms the classical DV-Hop.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2047-2051
• /
• 2009

In this paper, we propose the localization method on WSN(Wireless Sensor Network) using fuzzy model and Kalman filter. The proposed method is as follows: First, we estimate the distance of RSSI(Receive Signal Strength Index) by using fuzzy model in order to minimize the distance error. Second, we use a triangulation measurement for estimating the localization. And then, we minimize the localization error using a Kalman filter. Finally, we show the effectiveness and feasibility of the proposed method through some experiments.

• 한국지능시스템학회논문지
• /
• 제20권6호
• /
• pp.814-819
• /
• 2010

본 논문은 자율주행 장치(autonomous ground vehicle)를 위한 각속도의 오차 최소화에 관한 연구이다. 각속도의 오차 최소화는 자율주행 장치의 이동 거리를 측정하는 엔코더(encoder)와 관련하여 자율주행 장치의 가장 중요한 기반 기술인 위치측정(localization)과 밀접한 관련이 있다. 기존에 각속도의 오차 최소화 방법들에는 이동관성을 측정할 수 있는 가속계(accelerometer)와 회전관성을 측정할 수 있는 자이로(yaw gyro), 방위각을 측정할 수 있는 자계 센서인 전자나침판(electronic compass) 센서들을 확률을 통해 상호 보완하는 형태로 활발한 연구가 이루어지고 있다. 하지만 각속도 측정을 위해 사용되는 센서들은 수학적인 오차와 센서들의 자체 특성에 의해 누적 오차가 발생하게 되며, 여러 센서들을 이용하여 확률적인 오차 보정을 수행하여도 연산량과 비용이 증가되는 문제점을 가지게 된다. 따라서 본 논문에서는 자율주행 장치의 시스템 특성을 고려하여 엔코더와 자이로만을 이용한 각속도의 오차 최소화에 대한 연구를 수행하였다. 실험은 직접 설계 제작한 자율주행 장치를 이용하였으며, 자율주행 장치가 제어기를 통해 주행하는 동안에 엔코더, 자이로를 통해 계산된 각각의 각속도 결과들과 엔코더와 자이로만을 이용한 제안된 각속도 측정 방법의 결과를 비교하였다. 실험 결과, 엔코더 혹은 자이로만을 이용한 각속도 측정 방법들에 비해 제안한 각속도 측정 방법의 누적 오차가 크게 줄었음을 확인하였다.