• Water for future
• /
• v.18 no.3
• /
• pp.235-241
• /
• 1985

The predictions of the local and regional sand transport of the offshore tidal sand banks tn the west coast of Korea, east of the Yellow San have been performed on the basis of diagrammatical method suggested by Kenyon et al(1981). There is general agreements between these predictions and the earlier predictions(Choi, 1983) of net regional sand transport paths from the numerical simulation of maximum bottom stress vector during the semidiurnal period due to m2 and m4 tides. Further detailed investigations are proposed for the study of Choongang Chontoe where the predicted net sand transport direction is to the dredged navigation channel.

• Journal of the military operations research society of Korea
• /
• v.30 no.2
• /
• pp.81-95
• /
• 2004

This paper presents optimal solutions for the following two problems ; (1) The vehicle routing problem with deadline considering homeward-route transport requirement, (2) The problem of (1) with relaxed constraint that the vehicle cannot visit the depot during the trip. That is, for the second problem, vehicle can visit the depot several times during the trip. The formulation and optimal solution we obtained outperform the existing ones proposed by other researchers in the sense of time and total distance traveled and the results can be applicable to short-haul local transport.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.208-216
• /
• 2007

Wireless Sensor Networks (WSNs) are characterized by low capacity on each nodes and links. Wireless links have high bit error rate (BER) parameter that changes frequently due to the changes on network topology, interference, etc. To guarantee reliability in an error-prone environment, a retransmission mechanism can be used. In this mechanism, the number of retransmissions is used as a parameter that controls reliability requirement level. In this paper, we propose an Error Adaptive Transport Protocol (EATP) for WSNs that updates the number of retransmissions regularly to guarantee reliability during bit error rate changes as well as to utilize energy effectively. The said algorithm uses local information, thus, it does not create overhead problem.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.107-111
• /
• 2015

Our work is based on the development of a numerical model to develop a methodology for predicting the aging and breakdown in insulation due to the dynamics of space charge packets. The model of bipolar charge transports is proposed to simulate space charge dynamic for high DC voltage in law-density polyethylene (LDPE), taking into account the trapping and detrapping of recombination phenomena, this model has been developed and experimentally validation. Theoretical formulation of the physical problem is based on the Poisson, the continuity and the transport equations as well as on the appropriate models for injection. Numerical results provide temporal and local distributions of the electric field, the space charge density for the different kinds of charges, conduction and displacement current densities, and the external current.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.2
• /
• pp.5-8
• /
• 2010

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed (non-laminated) BSCCO tapes has been investigated. The samples were joined using a mechanically controlled jointing procedure. To achieve a uniform thickness at the joint a single point loading contact has been devised. GFRP mandrels with different bending radii which support the sample during bending have been used. $I_c$ have been measured at 77 K and self field. In the case of easy bending test for jointed BSCCO tapes, sudden degradation of $I_c$ is caused by the local strain concentration due to non uniform deformation at the edge parts of the joint. In the case of hard bending test of jointed BSCCO tapes transverse macroscopic crack at specific subsection caused a large $I_c$ degradation. The transport property of jointed BSCCO tapes in each bending mode was discussed with the damage morphology occurred.

• Particle and aerosol research
• /
• v.15 no.3
• /
• pp.91-104
• /
• 2019

In this study, hourly measurements of $PM_{2.5}$ and its major chemical constituents such as organic and elemental carbon (OC and EC), and ionic species were made between January 15 and February 10, 2018 at the air pollution intensive monitering station in Gwangju. In addition, 24-hr integrated $PM_{2.5}$ samples were collected at the same site and analyzed for OC, EC, water-soluble OC (WSOC), humic-like substance (HULIS), and ionic species. Over the whole study period, the organic aerosols (=$1.6{\times}OC$) and $NO_3{^-}$ concentrations contributed 26.6% and 21.0% to $PM_{2.5}$, respectively. OC and EC concentrations were mainly attributed to traffic emissions with some contribution from biomass burning emissions. Moreover, strong correlations of OC with WSOC, HULIS, and $NO_3{^-}$ suggest that some of the organic aerosols were likely formed through atmospheric oxidation processes of hydrocarbon compounds from traffic emissions. For the period between January 18 and 22 when $PM_{2.5}$ pollution episode occurred, concentrations of three secondary ionic species ($=SO{_4}^{2-}+NO_3{^-}+NH_4{^+}$) and organic matter contributed on average 50.8 and 20.1% of $PM_{2.5}$, respectively, with the highest contribution from $NO_3{^-}$. Synoptic charts, air mass backward trajectories, and local meteorological conditions supported that high $PM_{2.5}$ pollution was resulted from long-range transport of haze particles lingering over northeastern China, accumulation of local emissions, and local production of secondary aerosols. During the $PM_{2.5}$ pollution episode, enhanced $SO{_4}^{2-}$ was more due to the long-range transport of aerosol particles from China rather than local secondary production from $SO_2$. Increasing rate in $NO_3{^-}$ was substantially greater than $NO_2$ and $SO{_4}^{2-}$ increasing rates, suggesting that the increased concentration of $NO_3{^-}$ during the pollution episode was attributed to enhanced formation of local $NO_3{^-}$ through heterogenous reactions of $NO_2$, rather than impact by long-range transportation from China.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.131-137
• /
• 2004

This paper is intended as an investigation of the deposition characteristics and mass transport flux estimation in the Nakdong estuary. In order to understand the effects of the tidal current circulation which influenced to an estuary terrain change, the seawater circulation calculation by the use of 2D numerical model for the three cases of without riverflow, mean and flood riverflow quantity condition practiced and each sectional net-flux of water quantity between sandbars(so called, dung) estimated. It may be that an estuary terrain change due to the large scale construction and reclamation at the Nakdong estuary influence to the long-time deposition characteristics. by the revim for the old research, we know that the development of the local sandbars has been moved toward the east-side from the west-side estuary area after the construction of the Nakdong river dike, at present the strong-acted location is the Bakhap-dung of the front sea of Tadea. The seawater circulation pattern at this large scale area of tidal flat bring on a change due to the water quantity outflowing from the Nakdong river. Base on the calculated results for the section net-flux of water quantity, we see that the accumulating action very strong at the local sea around Jangjado, Bakhapdung and Tadae for the case of flood riverflow quantity condition, but at the local sea around Jinudo for the another cases. Consequently, it is emphasized that in the Nakdong estuary the main sensitive regions which influenced from the discharge of riverflow were the local sea around Jangjado, Bakhapdung, Tadae and Jinudo.

• Journal of agricultural medicine and community health
• /
• v.49 no.3
• /
• pp.216-234
• /
• 2024

Background: Hapcheon-gun, Gyeongsangnam-do, is designated as an emergency medical vulnerable area, facing significant challenges in transporting and treating emergency patients. A detailed analysis of the regional emergency medical system is required to identify effective solutions. Methods: This study employed a mixed-methods approach, combining quantitative data from the National Emergency Medical Information System and emergency activity logs with qualitative data from focus group interviews involving 24 stakeholders, including medical staff, paramedics, civil servants, and local residents. Results: Quantitative findings indicated an aging population in Hapcheon-gun, with a growing number of elderly emergency room users. Despite the utilization of local emergency medical institutions, a lack of trust and preference for urban hospitals led even patients with mild conditions to seek care at higher-level facilities. Following the COVID-19 pandemic, transport distances and times for patients using 119 emergency services increased. Qualitative analysis identified several issues: limited capacity of local institutions, challenges in patient transport due to misaligned emergency medical zones, an increase in severely ill patients, and the absence of a coordinated emergency medical consultative body. Recommendations include strengthening local institutions through government support, realignment of emergency zones, legal reforms, the establishment of a continuous consultative body, and enhancing the capacity of medical staff, paramedics, and residents. Conclusion: Improving the emergency medical system in Hapcheon-gun will require targeted efforts in institutional strengthening, legal and administrative support, and capacity-building initiatives.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.4
• /
• pp.67-76
• /
• 2024

This study conducted an operational evaluation of an emergency vehicle preemption system that can be operated as a wide-area unit beyond the boundaries of local governments. Analyzed the speed reduction rate of emergency vehicle dispatch data and traffic speed data to analyze the speed reduction rate of emergency vehicles operating in a wide area and region. In Goyang City, local dispatches were reduced by 50.8% and regional dispatches by 55.8%, while in Paju City, local dispatches were reduced by 55.1% and regional dispatches by 62.5%. The wide-area emergency vehicle preemption system proved to be effective when emergency vehicles were dispatched outside of local boundaries, such as confirming that there were many dispatches from Paju-si to Goyang-si when there were no large hospitals nearby. This study aims to help spread the wide-area emergency vehicle preemption system. Translated with DeepL.com (free version)

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.287-300
• /
• 2022

The introduction of Connected and Automated(CAD) technology has a growing interests especially in areas with low demand for transport, where often the local transport services do not connect to peripheral areas for more efficient and convenient mobility services. However, there are few researches on CAD-based mobility services in areas with low demand for transport. Because current researches are mainly focuses on introduction of CAD-based mobility services in area with high demand for transport such as urban and highway. These two areas have different road environments and these differences require different driving technology especially related to Operational Design Domain(ODD). ODD is important factors for introduction of CAD-based mobility services. Therefore, we compare the road environments of areas with low demand for transport and areas with high demand for transport in terms of ODD. In addition, this paper proposes suggest guidance for the introduction of CAD-based mobility services in areas with low demand for transport such as rural and suburban areas.