• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.1-7
• /
• 2004

This experimental study investigates the wall display of shoes shops among the commercial space to suggest a desirable lighting by focusing on the lighting on the lighting surroundings. The important outcomes of this study are summarized below. The result of the experiment for the wall lighting: For the wall lighting, which needs a diversity, there should be various light source or bigger rate of illuminance between the ambient lighting and the local lighting. There is another possibility that is we can use the lower rate of illuminance with the ambient lighting and the local lighting or higher illuminance generally. The other wall lighting, which need a luminance and a emotional response, will be more effective as they take the lower rate of illuminance with the ambient lighting and the local lighting or higher illuminance generally.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.545-552
• /
• 2001

Analysis of a structure for vertical vibration requires a lot of computational efforts because large number of degrees of freedom are generally involved in the dynamic response. Especially, when a structure is loaded with local vibration source, it may not be economical to model the whole structure to obtain the responses of specific members located near or far from the sources. In this study, substructure models have been used for analysis of local vibration An analysis of local vibration is performed for the case that the loaded point and the response point are located on the same floor. Other analysis is performed for the case that the loaded point and the response point are located on the different floor. In this case, if only the floors on which loaded and response points are located are modeled, response of substructure model is very different from that of full model. So, there should be a consideration that degrees of freedom of floors in addition to those of loaded and response floors are included to improve results of dynamic analysis. In this study, floors between loaded floor and response floor were modeled so that modeshapes which affect the response are presented well.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.327-339
• /
• 2018

This article presents a new global-local hybrid coarse-mesh finite difference (HCMFD) method for efficient parallel calculation of pin-by-pin heterogeneous core analysis. In the HCMFD method, the one-node coarse-mesh finite difference (CMFD) scheme is combined with a nodal expansion method (NEM)-based two-node CMFD method in a nonlinear way. In the global-local HCMFD algorithm, the global problem is a coarse-mesh eigenvalue problem, whereas the local problems are fixed source problems with boundary conditions of incoming partial current, and they can be solved in parallel. The global problem is formulated by one-node CMFD, in which two correction factors on an interface are introduced to preserve both the surface-average flux and the net current. Meanwhile, for accurate and efficient pin-wise core analysis, the local problem is solved by the conventional NEM-based two-node CMFD method. We investigated the numerical characteristics of the HCMFD method for a few benchmark problems and compared them with the conventional two-node NEM-based CMFD algorithm. In this study, the HCMFD algorithm was also parallelized with the OpenMP parallel interface, and its numerical performances were evaluated for several benchmarks.

• Journal of KIISE:Software and Applications
• /
• v.33 no.12
• /
• pp.1090-1102
• /
• 2006

This paper suggests a new algorithm for detecting the plagiarism among a set of source codes, constrained to be functionally equivalent, such are submitted for a programming assignment or for a programming contest problem. The typical algorithms largely exploited up to now are based on Greedy-String Tiling, which seeks for a perfect match of substrings, and analysis of similarity between strings based on the local alignment of the two strings. This paper introduces a new method for detecting the similar interval of the given programs based on an adaptive similarity matrix, each entry of which is the logarithm of the probabilities of the keywords based on the frequencies of them in the given set of programs. We experimented this method using a set of programs submitted for more than 10 real programming contests. According to the experimental results, we can find several advantages of this method compared to the previous one which uses fixed similarity matrix(+1 for match, -1 for mismatch, -2 for gap) and also can find that the adaptive similarity matrix can be used for detecting various plagiarism cases.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.554-566
• /
• 2010

We present optical and microphysical particle properties of aerosol retrieved by multi-wavelength Raman lidar at Anmyun island ($36.32^{\circ}N$, $126.19^{\circ}E$), Korea. The results present aerosol properties in various height layers of the atmospheric pollution layers observed over the Korean peninsula on eight consecutive days (27, 28, 29, 30 and 31 May, 4, 5 and 7 June) in 2005 at Anmyun island. We found anthropogenic pollution on 27, 28, and 29 May and local haze on other measurement days. The origin of the particle plumes was determined by simulations of FLEXPART. The source regions of the particles resulted in rather clear differences between the optical and microphysical properties of the pollution layers. The single-scattering albedo of anthropogenic aerosols from China ($0.91{\pm}0.01$ at 532 nm) were lower than the single-scattering albedo of local haze aerosols ($0.95{\pm}0.01$ at 532 nm). Local haze aerosols show larger effective radii of $0.24{\pm}0.02\;{\mu}m$ at relative humidity of 55~75%. The effective radii of anthropogenic aerosols are $0.20{\pm}0.2\;{\mu}m$ and $0.27\;{\mu}m$ at relative humidity of 25~50%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.666-671
• /
• 2016

This paper introduces a device providing close local lighting to the affected part, where the operation-purpose astral lamp alone cannot shed light directly, in an operation room of hospitals or clinics, which helps clinical doctors perform safe treatment of the affected part deep inside a human body. This medical assisting lighting is a device necessary to prevent fatal operation failures, which can occur with minute operation processes, such as tumor removal or angiorrhaphy. The components, such as the light source and power supply were designed to be low power consuming and small in size, have a narrow angle lens was used to increase the light spreading effect and focused illumination. The end-caps of the light transmission device using an optical cable and the lighting device were designed in the waterproof type to enable disinfection of these devices after use for the next patients. According to the measurement of the light source properties made after development of the retractor lighting device, the illumination intensity was 490 lux, the brightness was $11,550cd/m^2$, general color rendering index was 78, color temperature was 11,000K, and the intensity distribution was even, which were confirmed to be adequate for medical assisting local lighting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.84-92
• /
• 2000

A GaAs MESFET MMIC transmitter for 2.4 GHz wireless local loop handset is designed and fabricated. The transmitter consists of a double balanced active mixer and a two stage driver amplifier with voltage negative feedback. In particular, a pair of CS-CG(common source-common gate) structure compensates the reduction in dynamic range caused by unbalanced complementary IF input signals. And to suppress the leakage local power at RF port, the mixer is designed by using phase characteristic between the ports of MESFET. At the bias condition of 2.7 V and 55.2 mA, the fabricated MMIC transmitter with chip dimensions of $0.75\times1.75 mm^2$ obtains a measured conversion gain of 38.6 dB, output $P_{idB}$ of 11.6 dBm, and IMD3 at -5 dBm RF output power of -31.3 dBc. This transmitter is well suited for WLL handset.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.148-152
• /
• 2008

A new cost-effective atomic layer deposition (ALD) technique, known as Proximity-Scan ALD (PS-ALD) was developed and its benefits were demonstrated by depositing $Al_2O_3$ and $HfO_2$ thin films using TMA and TEMAHf, respectively, as precursors. The system is consisted of two separate injectors for precursors and reactants that are placed near a heated substrate at a proximity of less than 1 cm. The bell-shaped injector chamber separated but close to the substrate forms a local chamber, maintaining higher pressure compared to the rest of chamber. Therefore, a system configuration with a rotating substrate gives the typical sequential deposition process of ALD under a continuous source flow without the need for gas switching. As the pressure required for the deposition is achieved in a small local volume, the need for an expensive metal organic (MO) source is reduced by a factor of approximately 100 concerning the volume ratio of local to total chambers. Under an optimized deposition condition, the deposition rates of $Al_2O_3$ and $HfO_2$ were $1.3\;{\AA}/cycle$ and $0.75\;{\AA}/cycle$, respectively, with dielectric constants of 9.4 and 23. A relatively short cycle time ($5{\sim}10\;sec$) due to the lack of the time-consuming "purging and pumping" process and the capability of multi-wafer processing of the proposed technology offer a very high through-put in addition to a lower cost.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.80-84
• /
• 2010

Data multicasting from a source to multiple sinks in wireless sensor networks is used to achieve both reducing communication costs and energy efficiency. Almost all existing schemes for the multicasting might be effectively performed by optimal construction of a multicasting tree between a source and multiple stationary sinks. However, in practical sensor applications, sinks could move around on the wireless sensor networks for own missions, such as scouting of soldiers and saving lives of victims by firefighters. Unfortunately, the sink mobility causes frequent entire reconstruction of the multicasting tree and thus it leads to exhaustion of battery power of sensors. Hence, we propose an energy-efficient multicast protocol to support multiple mobile sinks by the local multicast tree reconstruction, called Local Update-based geographic Multicasting for Mobile sinks (LUMM) for wireless sensor networks. Our simulation results show that our scheme for mobile sinks is more efficient in terms of energy resource management than other exist works.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.651-666
• /
• 2020

In this study, the spatial variation mechanisms of large far-field earthquakes at engineering scales are first investigated with data from the 2008 Ms 8.0 Wenchuan earthquake. And a novel 'coherency cut-off frequency' is proposed to distinguish the spatial variations in ground motions in the low-frequency and high-frequency ranges. Then, a practical piecewise coherency model is developed to estimate and characterize the spatial variation in earthquake ground motions, including the effects of source-to-site distances, site conditions and neighboring topography on these variations. Four particular earthquake records from dense seismograph arrays are used to investigate values of the coherency cut-off frequency for different source-to-site distances. On the basis of this analysis, the model is established to simulate the spatial variations, whose parameters are suitable for both near- and far-field earthquake conditions. Simulations are conducted to validate the proposed model and method. The results show that compared to the existing models, the proposed model provides an effective method for simulating the spatial correlations of ground motions at local sites with known source-to-site distances.