• 제목/요약/키워드: Local Air Ventilation

검색결과 112건 처리시간 0.028초

국내 석회석 광산 수갱 굴착에 의한 통기효과 분석 연구 (A Study on the Ventilation Effects of the Shaft Development at a Local Limestone Mine)

  • 이창우;응우엔 반득;키로 록키 키부야;김창오
    • 터널과지하공간
    • /
    • 제28권6호
    • /
    • pp.609-619
    • /
    • 2018
  • 주선풍기가 설치된 통기수갱이 굴착된 국내 석회석 광산에서 수행한 통기수갱의 통기효과 분석결과 자연통기 및 기계통기 효과가 뚜렷하게 나타났다. 수갱을 통하여 입기되는 자연통기량은 최대 $11.7m^3/s$이었으며 갱내 공기온도의 측정에 의하여 비교적 정확한 정량적 예측이 가능하였다. 선풍기 가동에 의한 배기 통기량은 $20.3{\sim}24.8m^3/s$로 통기량의 변동은 갱도내 장비의 이동에 의한 통기특성곡선의 상향이동에 따른 선풍기 운전점의 변화에 의한 결과이므로 통기저항의 저감 노력이 요구된다. 갱구로부터 수갱까지 총 1912 m 갱도내 난류확산계수는 $15m^2/s$, $18m^2/s$로 나타나 오염물질은 기류보다 상대적으로 빨리 확산되므로 공기질 제어를 위하여 신속한 배기가 요구된다. 따라서 통기용 수갱은 급격히 심부화 및 대형화되고 있는 국내석회석광산의 지속적 개발을 위한 필수적 갱내 환경제어 시설로 권장되어야할 것으로 판단된다.

유해물질 및 공업용 분진 제거를 위한 산업용 후드 개선에 관한 연구 (A Study on Improvement of Industrial Hood in Ventilation System for Elimination of Harmful Material and Dust)

  • 김영선;오율권
    • 설비공학논문집
    • /
    • 제20권4호
    • /
    • pp.238-244
    • /
    • 2008
  • This study investigates on the improvement of inhalation effect of hood which attached new device named as "gas-guide-device" in local exhaust ventilation system for the effective elimination of harmful material and dust in manufacturing factory. The gas-guide-device having a diamond shape is composed of width (b) and two sides of a device (X, Y) and its size is selected the industrial hood under application in manufacturing factory after due consideration. In order to investigate the effect of gas-guide-device, numerical and experimental study is performed that the flow velocity is calculated and is measured by a commercial program "COMSOL $Multiphysics^{TM}$" and a hot wire type of anemometer, respectively. The numerical and experimental results are revealed is a similar pattern and flow velocity has improved to hood attached gas-guide-device. Also, the numerical method and result is also verified the dependance. Moreover, the optimum shape and size of gas-guide-device is revealed that the width (b) and the ratio of two sides of gas-guide-device (X, Y) has 125mm and 4 to 6.

대단면국내석회석광산용저풍압국부선풍기개발연구 (Development of a Low Pressure Auxiliary Fan for Local Large-opening Limestone Mines)

  • 이창우;웅웬반득
    • 터널과지하공간
    • /
    • 제25권6호
    • /
    • pp.543-555
    • /
    • 2015
  • 최근 대단면 갱도로 개발하고 있는 국내 석회석광산은 작업공간 환기를 위하여 과거 석탄광산에 광범위하게 사용되던 형태의 국부 선풍기를 주로 이용하고 있다. 대단면 갱도에서의 낮은 정압손실을 고려할 때 고풍압 선풍기는 과다 설비용량으로 인하여 비용측면에서 심각한 한계를 보이고 있다. 대단면 갱도에서의 최적 선풍기는 안전한 작업환경 유지를 위한 충분한 환기량을 공급할 수 있어야 할 뿐만 아니라 저운전비용도 보장하여야 한다. 본 연구는 대단면 갱도 내에서 높은 환기효율과 경제성을 가지는 저풍압 국부선풍기를 개발함이 목적이다. 이론적 연구와 아울러 2개소의 단면적이 다른 현장 실험 연구를 통하여 저풍압 선풍기의 환기효율을 분석하였다. 본 연구결과는 작업공간 공기질 및 작업환경 개선을 위한 국부선풍기의 경제성과 효율 제고에 적용 가능할 것으로 기대된다.

전국 수은 취급사업장의 작업환경 실태 조사 연구 (A Study of Field Survey on Working Environment for Mercury Treatment Establishments in Korea)

  • 엄성인;백존배;이영섭
    • 한국안전학회지
    • /
    • 제7권3호
    • /
    • pp.30-34
    • /
    • 1992
  • This study is conducted to evaluate the airborne concentration of mercury, as well as installation and efficiency of local exhaust ventilation system for 57 factories manufactured fluorescence lamps, mercury lamps and thermometers for July and August 1990. Results and conclusion are as fellows : 1) Mercury treatment factories are 32 among 57 ones, which are 18 fluorescence lamp manufacturing ones and 6 mercury lamp ones and 3 thermometer ones and 5 other ones. 2) Mean airborne concentrations of mercury for factories manufactured mercury lamps are 0.01 mg/ ㎥ in injection process and 0.0155mg/㎥ in exhaust process, and mean airborne concentration of mercury for factories manufactured thermometer are 0.023mg/㎥ in injection process and 0.012mg/㎥ in selection process. All of these airborne concentrations of mercury are lower than PEL(Permissible Exposure Limit ), 0.05mg/㎥. 3) Mean airborne concentrations of mercury for factories manufactured fluorescence lamps are 0.094mg/㎥ in injection process and 0.087mg/㎥ in exhaust process, and 0.052mg/㎥ in sealing process and 0.085mg/㎥ in other process, respectively. All of these air borne concentrations of mercury are exceeded to PEL. More than 60% among 32 factories manufactured mercury are exceeded to PEL. 4) Nine factories among 18 factories manufactured fluorestence lamps are equipped with local exhaust ventilation system, and 7 factories among 9 factories are required for the improvement of suction capacity and structure. Five factories among 14 factories manufactured mercury lamps and the other ones are equipped with local exhaust ventilation system, and 2 factories are required for the improvement of suction capacity and structure.

  • PDF

역유동계산법을 이용한 국소배기효율의 수치해석 (Numerical analysis of local exhaust effectiveness using reverse-flow calculation method)

  • 한화택
    • 설비공학논문집
    • /
    • 제10권6호
    • /
    • pp.658-665
    • /
    • 1998
  • This paper investigates local exhaust effectiveness in a room with a supply and an exhaust slots on the ceiling. The mean age of air is an indicator of supply effectiveness, while the mean residual life time can be used as an indicator of exhaust effectiveness. The distribution of local mean residual life time in a space is calculated by four different numerical procedures. The reverse-flow calculation method has been proved to show quite accurate results while it can save considerable amount of computation time and efforts, compared to the method by its original definition. It is concluded that the diffusion term in the equation of mean residual life time can be neglected. The spatial and temporal diffusion characteristics of the contaminant are also discussed.

  • PDF

유공성 수평격판을 가진 열원이 있는 밀폐공간내의 온도분포 특성 (Characteristices of Temperature Distribution in a Closed Space with Heat Source and Porous Horizontal Partition)

  • 박찬수;조대환;전철균
    • 한국해양공학회지
    • /
    • 제13권3B호
    • /
    • pp.29-37
    • /
    • 1999
  • Ventilation of the marine engine room is very important for the health of the workers as well as the normal operation of machines. To find proper ventilation conditions of this engine room, numerical simulation with standard k-${\epsilon}$ model was carried out. In the present study, the marine engine room is separated to two floors with porus horizontal partition and considered as a closed space with a heat source and forced ventilation ducts. The porosity of horizontal partition is found to be important. For the engine room with 2 supply ports & 2 exhaust ports, the increasing of the porosity of horizontal partition is effective to reduce the recirculation flow zone in the second floor. When the engine room is ventilated with three supply air ports & one exhaust port, the increasing of the porosity of horizontal partition is effective to reduce the recirculating flow zone in the exhaust air area, but there is a possibility of local extreme heating at the lower side of engine near bottom.

  • PDF

환기량 변화에 따른 실내공기질과 국소급기지수 특성 (Characteristics of Indoor Air Quality and Local Supply Index with a Variation of Supply ${\cdot}$ Exhaust Airflow rate)

  • 한창우;노광철;오명도
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2005년도 동계학술발표대회 논문집
    • /
    • pp.21-26
    • /
    • 2005
  • We performed the numerical analysis on the characteristics of indoor air quality and local supply index with a variation of supply · exhaust airflow rate. We analyzed the local supply index and carbon dioxide concentration at the room and breathing zone with respect to the variation of the supply · exhaust airflow rate. From the numerical results, we found that local supply index was affected but carbon dioxide concentration was hardly affected by the variation of the airflow rate in the room. And we also knew that carbon dioxide concentration was raised in despite of the increment of the supply airflow rate in the breathing zone. After this study it is necessary to analyze the local exhaust index when we evaluate the state of the ventilation in the room.

  • PDF

반밀폐형 공간에서 비등온 고농도 연무의 배연산출량 산정을 위한 Froude 상사연구 (The Froude Scaling Study on the Ventilation of Non-isothermal Concentrated Fume from the Semi-closed Space)

  • 장혁상;최병일;박재철;김명배
    • 대한환경공학회지
    • /
    • 제27권8호
    • /
    • pp.877-885
    • /
    • 2005
  • 반 밀폐형 공간에서 발생되는 비등온 고농도의 연무를 제거하기 위해 필요한 배연량 산정을 위한 실형과 모형사이의 Froude 상사연구를 시행하였다. Zukoski의 연무상승 방정식을 기반으로 하는 무차원 상사방정식을 구성한 다음 체적 $1\;m^3(1\;m\;{\times}\;1\;m\;{\times}\;1\;m)$인 모형 A와 체적 $0.125\;m^3(0.5\;m\;{\times}\;0.5\;m\;{\times}\;0.5\;m)$인 모형 B를 사용하여 기하학적 상사성에 따른 파라메터인 무차원 에너지방출량과 무차원 질량유량과의 상관관계를 실험적으로 평가하였다. 실험적 결과는 고농도 배연에 관련하며 구성된 이론적 상사가 타당함을 보여주었고 본 연구에서 구성된 이론적 방정식이 범용으로 적용될 수 있음을 보여 주었다. 본 연구의 실험조건에서 제어공간에 투입된 최대 에너지량은 $20\;kW/m^3$이며 이 범위 이하의 열량 투입조건에서 배연량 대비 에너지 투입양 간의 상사가 잘 이루어졌다. 연구 범위의 에너지 투입조건에서 열적영향에 의한 필요 배연량의 증가는 단순한 양론적 추정 배연량에 비해 20-30% 추가되는 것으로 나타났다. 본 연구 자료를 바탕으로 고농도 비등온 조건에서 열부력 및 확산효과에 의해 이탈되는 제어대상 연무를 효율적으로 제어하기 위한 국소배기시스템의 설계 개선을 가져 올 수 있다.