• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2003년도 추계학술대회 및 정기총회
• /
• pp.350-353
• /
• 2003

Navy surface vessels require pier services such as emergency repair, oil supply, fm loading/unloading, crane, standby readiness, normal repair, gun arrangement, ammunition loading, and food loading during the period in port. The purpose of this study is to establish efficient berth allocation plan for navy surface vessels in home port under the limited resources of piers and equipments. The study suggests Mixed Integer Programing (MIP) model for bath allocation problem, considering precedence relationships among services. For a effective analysis, the model is implemented by ILOG OPL(Optimization Programming Language) Studio 3.1 and ILOG Cplex 7.0. The results of the model show reduction of berth shifts and increasement of service benefits. And thus, it would be a possibility of contribution in the improvement of fleet readiness.

• Structural Engineering and Mechanics
• /
• 제23권4호
• /
• pp.339-352
• /
• 2006

Observing the unique stress-strain curves of the superelastic shape memory alloy (SMA) in tension and compression, the primary intention of this study is to investigate the behavior of the shafts made of the same material, under torsional loading-unloading cycles for large angle of twist. Experiments have been performed for the superelastic SMA shafts with different unsupported lengths and angles of twist and the results are compared with those of stainless steel (SUS304) shafts under similar test conditions. As expected for the superelastic SMA, the residual strains are small enough after each cycle and consequently, the hysteresis under loading-reverse loading is much narrower than that for the SUS304. For large angle of twists, the torsional strength of the superelastic SMA increases nonlinearly and exceeds that of SUS304. Most interestingly, the slender solid superelastic SMA shafts are found to buckle when acted upon torsion for large angle of twist.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.748-758
• /
• 2010

Navy surface vessels require pier services such as emergency repair, oil supply, arm loading/unloading, craning, standby readiness, normal repair, gun arrangement, ammunition loading, and food loading during the period in port. The purpose of this study is to establish efficient berth allocation plan for navy surface vessels in home port under the limited resources of piers and equipments. This study suggests Mixed Integer Programming model for berth allocation problem, considering precedence relationships among services and the uncertainty of the arrival and departure for each vessel. For an effective analysis, the model is implemented by ILOG OPL(Optimization Programming Language) Studio 6.0 and ILOG CPLEX 11.1., which shows a reasonable result.

• 한국항해항만학회지
• /
• 제29권1호
• /
• pp.77-82
• /
• 2005

컨테이너 무역 규모가 매년 증가함에 따라 항만 환경이 급격히 변화하고 있다. 이러한 항만의 변화에 성공적으로 대처하기 위해 차세대 항만하역시스템인 LMTT(Linear Motor-based Transfer Technology)의 연구가 진행되고 있다. LMTT용 셔틀 카의 프레임부는 내부 빔, 내부 빔, 크로스 빔으로 구성되어 있으며, 본 연구에서는 프레임을 설계하기 위하여 크로스 빔의 개수, 하중 재하 위치 및 내부 빔의 위치에 따른 외부 빔과의 거리비 등이 프레임의 강도 및 강성에 미치는 영향을 유한요소 해석을 통하여 하중이 외부 빔과 내부 빔에 동시에 작용하고 크로스 빔이 5개일 때가 최적의 조건이라는 결론을 얻을 수 있었다.

• 한국항해항만학회지
• /
• 제30권4호
• /
• pp.285-290
• /
• 2006

Shipping companies consider most of the ship turnaround time as a critical factor when selecting a rolling port for reducing costs. So, many researchers have been studying for the optimization of preplanning and high~performance of the Gantry Cranes (GCs) in container terminals for faster loading and unloading. Therefore, in this paper, we propose an RFID (Radio Frequency Identification) based RTLS (Real-Time Location System) for reducing the ship turnaround time in ubiquitous port environment. In addition, pre-planning based on ubiquitous computing environment will support the GC and Yard Tractors (YTs), and reduce ship turnaround time more effectively. Especially, the proposed method enormously enhances the productivity of loading for the twin-lift system It will reduce the whole lead-time in the process of port logistics.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.18-21
• /
• 2004

This paper discusses how steel cord and PVA hybrid fibers enhance the performance of high performance fiber reinforced cementitious composites (HPRFCC) in terms of elastic limit, strain hardening response and post peak of the composites. The effect of microfiber(PVA) blending ratio is presented. For this purpose flexure, direct tension and split tension tests were conducted. It was found that HFRCC specimen shows multiple cracking in the area subjected to the greatest bending tensile stress. Uniaxial tensile test confirms the range of tensile strain capacity from 0.5 to $1.5\%$ when hybrid fiber is used. The cyclic loading test results identified a unique unloading and reloading response for this ductile composite. Cyclic loading in tension appears not to affect the tensile response of the material if the uniaxial compressive strength during loading is not exceeded.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.343-359
• /
• 2014

In this work a numerical method to simulate the response of reinforced concrete structures subject to cyclically imposed displacements is proposed. The method consists of a combination of a displacement and load controlled version of the Newton-Raphson iterative technique, used for the loading and the unloading part of the cycles respectively. The whole procedure is combined with a relatively simple concrete model whose only material parameter is its uniaxial compressive strength. The proposed methodology may realistically simulate, in an easy way, the physical process of any experimentally tested RC structure under imposed displacements cycles. The efficiency of the approach is demonstrated through a series of analyses of experimentally tested specimens reported in the literature.

• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.330-344
• /
• 1996

A model of a cable comprising interacting wires with dry friction forces at the interfaces is subjected to a quasi-static cyclic loading. The first cycle of this process, comprising of axial loading, unloading and reloading is investigated analytically. Explicit load-elongation relationships are obtained for all of the above phases of the cycle. An expression for the hysteretic losses is also obtained in an explicit form. It is shown that losses are proportional to the third power of the amplitude of the oscillating axial force, and are in inverse proportion to the interwire friction forces. The results obtained are used to introduce a model of a cable as a solid rod with an equivalent stiffness and damping properties of the rod material. It is shown that the stiffness of the equivalent rod is weakly nonlinear, whereas the viscous damping coefficient is proportional to the amplitude of the oscillation. Some numerical results illustrating the effect of cable parameters on the losses are given.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.250-257
• /
• 2000

A Helmholtz free energy for a martensitic transformation of a single crystalline shape-memory alloy is obtained by a micromechanical approach, 24 variants of the single crystal are taken into account. In the framework of irreversible thermodynamics, a kinetic relation, a martensitic nucleation criterion and the reorientation criterion of martensitic variants are obtained. These relations are valid for a three-dimensional proportional or non-proportional mechanical loading or a combination of mechanical and thermal loading. Reorientation behavior of a single crystalline shape-memory alloy CuZnAl is simulated. When a tensile load is applied to a thermally-induced martensite, 24 self-accommodated martensitic variants are reoriented to the most favorable variant. In the following unloading, the most favorable variant in the tensile load is reoriented to the most favorable variant in this loading condition.

• Journal of Korea Trade
• /
• 제25권1호
• /
• pp.203-219
• /
• 2021

Purpose - The purpose of this study is to review and analyzes the contract of carriage and delivery/transport document in light of the major changes made to the Incoterms^® 2020 rules forced into effect on January 1st, 2020. Design/methodology - This study analyzed responsibility for the loading and unloading of goods under the contract of carriage in Incoterms 2020^® rules forced into effect by the ICC from January 1, 2020, and what document must be presented as evidence of delivery by the seller. Findings - A review revealed that in Rule C, the costs of unloading at the place of destination are determined by the terms of the contract of carriage, and in the DAP and DDP rules, if the seller bears the unloading costs, such unloading costs cannot be recovered from the buyer. To settle this issue, the seller needs to make a contract of carriage by sea with the carrier on FI terms. Furthermore, in the case of containerized goods that the FCA should be used, FOB was misused because the seller could not present an on-board bill of lading in the L/C transaction. However, it was confirmed that in FCA, the parties can use an optional mechanism to issue an on-board bill of lading. Originality/value - Incoterms 2020^® rules are still widely used in international trade by parties to contract sales around the world, just like Incoterms 2010^® rules. This study attempts to reduce or eliminate disputes that may arise from interpretative misunderstandings between the parties in the contract of sales concluded by the seller and the buyer.