• 한국가스학회지
• /
• 제23권4호
• /
• pp.74-79
• /
• 2019

상용급 재가열로 내부 소재 온도 측정을 위하여 특수 제작된 시험용 시편을 사용하고, 실시간 온도 예측을 위하여 선형화 된 열모델이 적용되었다. 적용된 로는 Walking Beam Type이고 소재의 형상은 폭 160mm, 높이 160mm, 길이 8100mm의 STS302 재질이며 온도 측정을 위해 폭, 높이와 길이 방향으로 총 6개의 열전대를 설치하였다. 로내의 분위기 온도는 섭씨 1265도까지 상승시켰으며 소재의 장입부터 토출까지 약 2.5시간이 소요되었다. 시험결과, 토출 시 소재의 온도는 섭씨 1256~1259도 범위에서 평균적으로 1257도 였으며, 열모델을 통한 예측된 평균 온도는 1251도로 나타났다. 따라서 해석과 시험결과의 편차는 6도 정도로서, 이는 산업계에서 요구되는 10도 이내의 범위에 있다.

• Steel and Composite Structures
• /
• 제39권4호
• /
• pp.435-451
• /
• 2021

Shear lag effect was a significant mechanical behavior of steel-concrete composite beams, and the effective flange width was needed to consider this effect. However, the effective flange width is mostly determined by static load test. The cyclic vehicle loading cases, which is more practical, was not well considered. This paper focuses on the study of shear lag effect of the concrete slab in the negative moment region under fatigue cyclic load. Two specimens of two-span steel-concrete composite beams were tested under fatigue load and static load respectively to compare the differences in the negative moment region. The reinforcement strain in the negative moment region was measured and the stress was also analyzed under different loads. Based on the OpenSees framework, finite element analysis model of steel-concrete composite beam is established, which is used to simulate transverse reinforcement stress distribution as well as the variation trends under fatigue cycles. With the established model, effects of fatigue stress amplitude, flange width to span ratio, concrete slab thickness and shear connector stiffness on the shear lag effect of concrete slab in negative moment area are analyzed, and the effective flange width ratio of concrete slab under different working conditions is calculated. The simulated results of effective flange width are compared with calculated results of the commonly used specifications, and it is found that the methods in the specifications can better estimate the shear lag effect in concrete slab under static load, but the effective flange width in the negative moment zone under fatigue load has a large deviation.

• Structural Engineering and Mechanics
• /
• 제78권5호
• /
• pp.585-597
• /
• 2021

This paper presents a comparative study of analytical method, finite element method (FEM) and Multilayer Perceptron (MLP) for analysis of a contact problem. The problem consists of a functionally graded (FG) layer resting on a half plane and pressed with distributed load from the top. Firstly, analytical solution of the problem is obtained by using theory of elasticity and integral transform techniques. The problem is reduced a system of integral equation in which the contact pressure are unknown functions. The numerical solution of the integral equation was carried out with Gauss-Jacobi integration formulation. Secondly, finite element model of the problem is constituted using ANSYS software and the two-dimensional analysis of the problem is carried out. The results show that contact areas and the contact stresses obtained from FEM provide boundary conditions of the problem as well as analytical results. Thirdly, the contact problem has been extended based on the MLP. The MLP with three-layer was used to calculate the contact distances. Material properties and loading states were created by giving examples of different values were used at the training and test stages of MLP. Program code was rewritten in C++. As a result, average deviation values such as 0.375 and 1.465 was obtained for FEM and MLP respectively. The contact areas and contact stresses obtained from FEM and MLP are very close to results obtained from analytical method. Finally, this study provides evidence that there is a good agreement between three methods and the stiffness parameters has an important effect on the contact stresses and contact areas.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1485-1494
• /
• 2023

The bow of the nuclear fuel assembly is a well-known phenomenon. One of the vital criteria during the history of nuclear fuel development has been fuel assembly's mechanical stability. Once present, the fuel assembly bow can lead to safety issues like excessive water gap and power redistribution or even incomplete rod insertion (IRI). The extensive bow can result in assembly handling and loading problems. This is why the fuel assembly's bow is one of the most often controlled geometrical factors during periodic fuel inspections for VVER when compared e.g. to on-site fuel rod gap measurements or other instrumental measurements performed on-site. Our proposed screening method uses existing video records for fuel inspection. We establish video frames normalization and aggregation for the purposes of bow measurement. The whole process is done by digital image processing algorithms which analyze rotations of video frames, extract angles whose source is the fuel set torsion, and reconstruct torsion schema. This approach provides results comparable to the commonly utilized method. We tested this new approach in real operation on 19 fuel assemblies with different campaign numbers and designs, where the average deviation from other methods was less than 2 % on average. Due to the fact, that the method has not yet been validated during full scale measurements of the fuel inspection, the preliminary results stand for that we recommend this method as a complementary part of standard bow measurement procedures to increase measurement robustness, lower time consumption and preserve or increase accuracy. After completed validation it is expected that the proposed method allows standalone fuel assembly bow measurements.

• 생태와환경
• /
• 제40권2호
• /
• pp.201-213
• /
• 2007

본 연구에서는 북한강 상류 지역인 소양강댐 유역에 BASINS/WinHSPF모델을 적용하였다. WinHSPF는 도시와 농촌지역 등이 혼재된 토지이용형태를 보이는 유역에 적용하기 적합한 모델로서, 산림이 대부분인 소양강댐 유역의 유출량 및 수질을 모의하고, 유역의 오염부하량을 분석하였다. 또한, 유역관리를 위해 인공습지와 저류지를 설치하였을 경우 WinHSPF의 Best Management Practice Evaluation(BMPRAC)을 통한 오염부하 삭감량을 산정하였다. WinHSPF 모델을 이용하여 유출량은 2000년부터 2004년까지, 수질 항목은 1990년부터 2004년가지 모의하였다. 모델 보정 결과 유량의 변화는 인북천, 북천, 내린천 세 곳 모두 강수량의 변화와 일치하여 변화하는 경향을 나타내고 있었고 모의치가 실측치를 대체적으로 잘 반영하였지만 유출량이 피크인 경우에 실측지에 비해 과소평가 되는 경향을 나타내었다. 이는 각 소유역에서 발생하는 강우량을 이용하여 모델을 구동한 것이 아니고, 일부 국한된 기상관측소의 자료만을 이용하였기 때문에 지역적인 차이가 나타났거나, 수위-유량 곡선을 통해 유출량을 산정하는 과정에서 수위가 높은 시기에 유량이 과도하게 계산된 경우가 있기 때문이라 판단된다. 수질항목은 온도, DO, BOD의 경우 예측값이 연중 수질변화패턴을 잘 반영하였다. TN과 TP는 모의치가 다소 과대, 과소평가되는 경향이 있었는데, 향후 보다 효율적인 유역관리를 위한 모델의 활용을 위해서는 정확하고 자세한 기상자료와 수문자료가 뒷받침되어야 하며, 실측지점의 특성을 대표할 수 있는 수질 및 유출량 측정이 이루어져야 할 것이다. 2000년부터 2004년가지 소양강댐 유역의 오염부하량은 강우량이 가장 논은 2003년에 BOD, TN, TP가 각각 4,109,674 kg $yr^{-1}$, 6,457,315 kg $yr^{-1}$, 104,186 kg $yr^{-1}$로 가장 높게 나타났다. 월별 부하량은 7월부터 9월에 배출되는 양이 BOD는 약 63.5%, TN 약 64.1%, TP는 약 64.4%를 차지하여, 강우 시 유출량이 증가하면 부하량도 비례하여 증가는 것으로, 강우 유출량에 많은 영향을 받고 있는 것으로 나타났다. 인북천, 북천, 내린천, 소양강 유역에서 BOD, TN, TP의 오염부하량은 약 98% 이상이 비점오염원으로부터 발생하는 것으로 분석되었는데, 이는 유역의 대부분이 산지와 농경지로서 산업시설과 같은 점오염원이 적고,강우 시 산림지역 및 농경지에서 많은 양의 비점오염원이 발생하기 때문으로 판단된다. WinHSPF모델의 BMPRAC를 이용하여 Scenario를 적용한 결과 부하량 삭감율은 저류지를 설치한 scenario 2가 가장 많이 감소하는 것으로 나타났다. 강우기(7${\sim}$9월)의 부하량 삭감율은 BOD의 경우 Scenario 1-1(처리용량 1,500 $m^3$ $day^{-1}$인 인공습지), scenario 1-2 (처리용량 1,000 $m^3$ $day^{-1}$인 인공습지), scenario 2(면적 4.2ha인 저류지)가 각각 연평균 6.9%, 4.8%, 7.1%의 감소를 보였다. TN은 4.7%, 3.4%, 13.4%의 삭감율을 나타내었으며, TP는 5.6%, 3.9%, 7.3%의 삭감율을 나타내었다. 본 연구에서는 적용하지 못하였으나, 인공습지와 저류지의 적절한 연계시스템을 적용한다면 저감시설 설치 부지면적과 비용의 감소뿐만 아니라 보다 효과적인 수질개선효과를 가져올 수 있으리라 판단된다.

• Asian Journal of Business Environment
• /
• 제2권1호
• /
• pp.25-34
• /
• 2012

It is possible to use pallet for forwarding as chinese cabbages and radishes are general large-scale trading items at the agricultural wholesale market though, however, most of these are forwarded as it have packed in net bags or in P·E bags. Thus, it is still hard for palletizing. The type of packing the product in the net bag makes it difficult for palletizing. It is not a stable shape enough and easily collapsed for pallet loading. Because of this collapsibility, the corrugated cardboard box is being used to enhance forwarding efficiency, but the existing corrugated cardboard box could be crushed easily by moist what is from the agricultural product's property and it also could be squashed by the mass of the loaded box layers on itself. In contrary, the functional waterproof corrugated cardboard box is not collapsed through palletizing and it is efficient for product management with it's ventilation function in respond to pre-cooling effect. Furthermore, because it has various functional shapes as the open type, the partition type and so on, it is effective for maintaining freshness of the product and standardizing the distribution of agricultural product. It is well-known that it is possible to introduce this box to cargo-works of agricultural product. Consequently, the recognition of main distributors about the pallet distribution of the chinese cabbage and the radish was apprehended in this study for activating mechanization of loading and unloading. The survey was conducted to the main distributors such as the forwarder, the auction dealer and the commission merchant with Garak-dong wholesale market as the center. The appropriate packing materials and problems of the existing method for loading and unloading were derived through the survey. Especially, it was focused on analyzing the difference of recognition between the subject groups for the way of using waterproof cardboard corrugated box to deal with the difficult product for packing in normal corrugated box because of the box's absorption of moist from the agricultural product like a chinese cabbage and a radish. Total In the cases of the forwarders and the commission merchants, the net was highly responded as 45%, 74% from each groups for the best packing material for mechanization of distribution and the waterproof corrugated cardboard box was responded as 20%, 22% from each groups as much preferable than multi-stage wooden box. However, for the radish, the waterproof corrugated cardboard box was the best material as 56%, and the auction trader group supported it for 80%. So, the using the waterproof corrugated cardboard box for mechanization of distribution was negative for the chinese cabbage, but it was positive for the radish. The average was 2.42, the standard deviation was 1.24. The negative response(about 55%) was prevailing more than positive response(about 23%). It could be analyzed that even there was the positive recognition for using the waterproof corrugated cardboard box for the radish though the preference for low price of net bag in the chinese cabbage forwarding procedure. Still now, it seems that is a burden for using the waterproof corrugated cardboard box with high price. In the analysis on the recognition differences about using the waterproof corrugated cardboard box for the chinese cabbages and the radish between the forwarders and the commission merchants, generally the negative recognition was prevailing, but the forwarders(2.696) were more positive for using the waterproof corrugated cardboard box than the commission merchants(2.145).

• 대한핵의학회지
• /
• 제7권2호
• /
• pp.1-12
• /
• 1973

The most commonly used methods for determining thyroxine binding globulin(TBG) concentration as the total thyroxine-binding capacity utilize electrophoretic seperation of serum. Although technically simple, the electrophoretic method is time consuming and is limited in the number of samples which can be run in a single assay. The author presented a single $T_4$ load ion exchange resin method as an approach to simplify the technique as with clinical practicability and results were analyzed. For construction of the standard curves, serum mixtures were diluted with barbital buffer.which effectively blocked $T_4$-binding to TBPA. For each serum dilution, a constant amount of $T_4-^{125}I$ and increments of unlabelled $T_4$ were added. After incubation in water bath, resin beads were dispensed to the samples which binded all $T_4$ not bound to TBG. The radioactivity in the supernatant was counted in the gamma scintillation counter. Each standard curve was plotted from the percent counts in the supernatant and total $T_4$ in each tube. Unknown samples were diluted to 1:40 and ran at a single $T_4$ loading concentration, and the TBG capacity of the samples was able to be read on the standard isobars. The following results were obtained. 1) Mean and standard deviation for TBG capacity in normal population was $28.6{\pm}5.09{\mu}g\;T_4/100ml$. 2) $24.9{\pm}3.87{\mu}g\;T_4/100ml$ in hyperthyroidism showed low TBG capacity comparing to normal population.(p<0.025) 3) $31.0{\pm}2.40{\mu}g\;T_4/100ml$ in hypothyroidism showed high TBG capacity tendency comparing to normal population. 4) Reversed correlationship existed between TBG capacity and $T_3$ resin uptake(r=-0.624), TBG capacity and serum $T_4$ value (r=-0.859), and TBG capacity and free thyroxine index(r=-0.623). The author assumes that this method of assay is considerably simpler in instrumentation and technique than any other assays traditionally being used, and seems to be more practical for routine clinical laboratory use.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 춘계학술대회 논문집
• /
• pp.341-343
• /
• 2006

The current spectral shape matching method (SSMM), developed by Ahn and Shanmugam (2004), relies on the assumption that the path radiance resulting from scattered photons due to air molecules and aerosols and possibly direct-reflected light from the air-sea interface is spatially homogeneous over the sub-scene of interest, enabling the retrieval of water-leaving radiances ($L_w$) from the satellite ocean color image data. This assumption remains valid for the clear atmospheric conditions, but when the distribution of aerosol loadings varies dramatically the above postulation of spatial homogeneity will be violated. In this study, we present the second version of SSMM which will take into account the horizontal variations of aerosol loading in the correction of atmospheric effects in SeaWiFS ocean color image data. The new version includes models for the correction of the effects of aerosols and Raleigh particles and a method fur computation of diffuse transmittance ($t_{os}$) as similar to SeaWiFS. We tested this method over the different optical environments and compared its effectiveness with the results of standard atmospheric correction (SAC) algorithm (Gordon and Wang, 1994) and those from in-situ observations. Findings revealed that the SAC algorithm appeared to distort the spectral shape of water-leaving radiance spectra in suspended sediments (SS) and algal bloom dominated-areas and frequently yielded underestimated or often negative values in the lower green and blue part of the electromagnetic spectrum. Retrieval of water-leaving radiances in coastal waters with very high sediments, for instance = > 8g $m^{-3}$, was not possible with the SAC algorithm. As the current SAC algorithm does not include models for the Asian aerosols, the water-leaving radiances over the aerosol-dominated areas could not be retrieved from the image and large errors often resulted from an inappropriate extrapolation of the estimated aerosol radiance from two IR bands to visible spectrum. In contrast to the above results, the new SSMM enabled accurate retrieval of water-leaving radiances in a various range of turbid waters with SS concentrations from 1 to 100 g $m^{-3}$ that closely matched with those from the in-situ observations. Regardless of the spectral band, the RMS error deviation was minimum of 0.003 and maximum of 0.46, in contrast with those of 0.26 and 0.81, respectively, for SAC algorithm. The new SSMM also remove all aerosol effects excluding areas for which the signal-to-noise ratio is much lower than the water signal.

• 한국항공우주학회지
• /
• 제48권3호
• /
• pp.195-205
• /
• 2020

본 논문은 항공기 전기체 구조시험에서 6개 자유도를 구속하는 자세구속시스템에서 발생하는 반력들 분석에 대해 다루고 있다. 반력에는 시험의 모든 오차(제어오차와 기타시험오차)를 포함하고 있으므로 반력분석을 통한 시험오차를 평가하는 연구가 의미가 있고 이를 위해서는 우선 바른 반력산출이 우선되어야 하고 바른 반력산출이 본 연구의 초점이다. 본 연구에서 반력을 공칭반력(Rn)과 시험오차반력(Rce, Rerr)의 합으로 표시할 것을 제시하였고 초기상태(0%DLL)에서 이미 내포한 시험오차특성과 하중증분에 따라 발생하는 시험오차특성을 구분하기 위해 반력을 초기상태반력과 상대 반력으로 구분하여 분석하였다. 선미익기 전기체 구조시험 데이터를 활용하여 정량적 반력분석 결과 제어오차로 인한 반력(Rce)값은 전 하중레벨에서 크기변화가 크지 않으며, 합성력 크기가 82.8N 이내로 유지되었고, 이는 하중부가 전체널에 대한 제어오차(TMF)가 -30~40N 범위 내에서 큰 변화 없이 유지되기 때문이다. 상대반력분석을 통해 산출된 기타시험오차(Rerr_r)의 합성력 크기는 하중 증분에 따라 증대되며, 그 크기도 Rce_r보다는 매우 크게 증대됨(최대치808N)을 보여주었고 바른 상대반력 산출을 위해서는 시험체 변형을 고려해야 함을 각 성분별(X0, Y0, Z0) Rerr_r 분석을 통해 보였다. 시험체 변형을 고려한 반력산출은 시험체에 가해지는 힘들의 작용점 이동을 산출할 수 있는 시험체 변형특성식을 요구한다는 것을 보였다.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.411-422
• /
• 2010

탄소나노튜브-에폭시 복합재료의 미세손상에 대한 자체-감지도와 분산도와 관련되는 특성 연구가 접촉각, 전기-미세역학 시험법 및 음향방출을 통하여 수행하였다. 시편들은 미처리와 산처리된 탄소나노튜브가 첨가된 에폭시 복합재료와 순수 에폭시로 제조되었다. 상대적인 분산도는 부피 전기저항도와 그 표준편차로 평가하였다. 응력전달을 나타내는 겉보기 탄성율은 미처리 탄소나노튜브 복합재료보다 산처리된 경우가 크게 나타났다. 단일 탄소섬유/탄소나노튜브-에폭시 복합재료는 부가한 반복 하중에 대해서 접촉저항도의 변화로 잘 감지되었다 섬유 풀-아웃 시험에서 단일 탄소섬유와 탄소나노튜브-에폭시간의 계면접착강도는 순수 에폭시의 경우보다 작았다. 음향방출과 함께 전기저항측정을 통한 미세파손 감지는, 전도성 있는 탄소나노튜브-에폭시 복합재료에서는 단일 탄소섬유 파손에 대한 단계적인 전기저항도의 증대를 보여 주었으나, 순수 에폭시의 경우는 첫번째 탄소섬유의 파단의 경우 바로 저항이 무한대로 증대함을 보여주었다. 첨가한 탄소나노튜브의 미세계면 손상으로 인하여, 음향방출 발생이 나노복합재료가 순수 에폭시에 비하여 훨씬 증대하였다.