Browse > Article
http://dx.doi.org/10.12989/scs.2021.39.4.435

Analysis of shear lag effect in the negative moment region of steel-concrete composite beams under fatigue load  

Zhang, Jinquan (Research Institute of Highway Ministry of Transport)
Han, Bing (School of Civil Engineering, Beijing Jiaotong University)
Xie, Huibing (School of Civil Engineering, Beijing Jiaotong University)
Yan, Wutong (School of Civil Engineering, Beijing Jiaotong University)
Li, Wangwang (China Academy of Railway Sciences Corporation Limited)
Yu, Jiaping (School of Civil Engineering, Beijing Jiaotong University)
Publication Information
Steel and Composite Structures / v.39, no.4, 2021 , pp. 435-451 More about this Journal
Abstract
Shear lag effect was a significant mechanical behavior of steel-concrete composite beams, and the effective flange width was needed to consider this effect. However, the effective flange width is mostly determined by static load test. The cyclic vehicle loading cases, which is more practical, was not well considered. This paper focuses on the study of shear lag effect of the concrete slab in the negative moment region under fatigue cyclic load. Two specimens of two-span steel-concrete composite beams were tested under fatigue load and static load respectively to compare the differences in the negative moment region. The reinforcement strain in the negative moment region was measured and the stress was also analyzed under different loads. Based on the OpenSees framework, finite element analysis model of steel-concrete composite beam is established, which is used to simulate transverse reinforcement stress distribution as well as the variation trends under fatigue cycles. With the established model, effects of fatigue stress amplitude, flange width to span ratio, concrete slab thickness and shear connector stiffness on the shear lag effect of concrete slab in negative moment area are analyzed, and the effective flange width ratio of concrete slab under different working conditions is calculated. The simulated results of effective flange width are compared with calculated results of the commonly used specifications, and it is found that the methods in the specifications can better estimate the shear lag effect in concrete slab under static load, but the effective flange width in the negative moment zone under fatigue load has a large deviation.
Keywords
steel-concrete composite beam; fatigue; shear lag; negative moment region; effective flange width;
Citations & Related Records
연도 인용수 순위
  • Reference
1 McKenna, F. and Fenves, G.L. (2015), OpenSees 2.5.0, Computer Software. UC Berkeley, Berkeley (CA); 2015. http://opensees.berkeley.edu.
2 Okui, Y. and Nagai, M. (2007), "Block FEM for time-dependent shear-lag behavior in two I-girder composite bridges", J. Bridge Eng.g, 12(1), 72-79. http://doi.org/10.1061/(ASCE)1084-0702(2007)12:1(72).   DOI
3 Reissner, E. (1946), "Analysis of shear lag in box beams by the principle of minimum potential energy", Quarterly Appl. Math., 5, 267-278. http://doi.org/10.1090/qam/17176.   DOI
4 Sun, F.F. and Bursi, O. (2005), "Displacement-based and two-field mixed variational formulation for composite beams with shear lag", J. Mech. Eng., 131(2), 199-210.   DOI
5 Tevatia, A. and Srivastava, S.K. (2015), "Modified shear lag theory based fatigue crack growth life prediction model for short-fiber reinforced metal matrix composites", Int. J. Fatigue, 70, 123-129. http://doi.org/10.1016/j.ijfatigue.2014.09.004.   DOI
6 Zhang, Y.L., et al. (2010), "Study of the shear lag effect and the effective flange width at negative moment zone of steel-concrete composite beams", Eng. Mech., 27, 178-185. (in Chinese). http://doi.org/10.3724/SP.J.1011.2010.01138.   DOI
7 Zhou, W., Jiang, L. and Yu, Z. (2013), "Analysis of free vibration characteristic of steel-concrete composite box-girder considering shear lag and slip", J. Central South Univ., 20(9), 2570-2577. http://doi.org/10.1007/s11771-013-1770-x.   DOI
8 Zhu, L., et al. (2015), "Simplified analysis method accounting for shear-lag effect of steel-concrete composite decks", J. Constr. Steel Res., 115, 62-80. http://doi.org/10.1016/j.jcsr.2015.08.020.   DOI
9 Dezi, L., Gara, F. and Leoni, G. (2006), "Effective slab width in prestressed twin-girder composite decks", J. Struct. Eng., 132(9), 1358-1370. http://doi.org/10.1061/(asce)0733-9445(2006)132:9(1358).   DOI
10 Gara, F., Ranzi, G. and Leoni, G. (2008), "Analysis of the shear lag effect in composite bridges with complex static schemes by means of a deck finite element", Int. J. Steel Struct., 8(4), 249-260. http://doi.org/10.1109/TITS.2008.2006799.   DOI
11 Eurocode 4 (2004), EC4 design of composite steel and concrete structures - part 1.1: general rules and rules for buildings. British Standards Institution.
12 Gara, F., Leoni, G. and Dezi, L. (2009), "A beam finite element including shear lag effect for the time-dependent analysis of steel-concrete composite decks", Eng. Struct., 31(8), 1888-1902. http://doi.org/10.1016/j.engstruct.2009.03.017.   DOI
13 Gara, F., Ranzi, G. and Leoni, G. (2011), "Partial interaction analysis with shear-lag effects of composite bridges: a finite element implementation for design applications", Adv. Steel Constr., 7(1), 1-16.
14 Gara F., Ranzi G. and Leoni G. (2011), "Simplified method of analysis accounting for shear-lag effects in composite bridge decks", J. Constr. Steel Res., 67(10), 1684-1697. http://doi.org/10.1016/j.jcsr.2011.04.013.   DOI
15 Masoudnia, R. (2020), "State of the art of the effective flange width for composite T-beams", Constr. Build. Mater., 244, 118303. http://doi.org/10.1016/j.conbuildmat.2020.118303.   DOI
16 Henriques, D., Goncalves, R. and Camotim, D. (2015), "A physically non-linear GBT-based finite element for steel and steel-concrete beams including shear lag effects", Thin-Wall. Struct., 90, 202-215. http://doi.org/10.1016/j.tws.2015.01.010.   DOI
17 JTG D64 (2015), Specifications for design of highway steel bridge, Ministry of Transport of the People's Republic of China; Beijing, China.
18 Kristek, V., Evan, H.R. and Ahmad, M.K.M. (1990), "A shear lag analysis for composite box girders", J. Constr. Steel Res., 16, 1-21. http://doi.org/10.1016/0143-974X(90)90002-X.   DOI
19 Lin, W., Yoda, T. and Taniguchi, N. (2013), "Fatigue tests on straight steel-concrete composite beams subjected to hogging moment", J. Constr. Steel Res., 80, 42-56. http://doi.org/10.1016/j.jcsr.2012.09.009.   DOI
20 Macorini, L., Fragiacomo, M., Amadio, C. and Izzuddin, B.A. (2006), "Long-term analysis of steel concrete composite beams: FE modelling for effective width evaluation", Eng. Structures, 28, 1110-1121. http://doi.org/10.1016/j.engstruct.2005.12.002.   DOI
21 Castro, J.M., Elghazouli, A.Y. and Izzuddin, B.A. (2017), "Assessment of effective slab widths in composite beam", J. Constr. Steel Res., 63, 1317-1327. http://doi.org/10.1016/j.jcsr.2006.11.018.   DOI
22 Uriz, P.(2005), "Towards earthquake resistant design of concentrically braced steel structures, Doctoral Dissertation, Structural Engineering, Mechanics, and Materials", University of California, Berkeley, 2005.
23 Wang, J.J., Liu, C., Fan, J.S., Hajjar, J.F. and Nie, X. (2019), "Triaxial Concrete Constitutive Model for Simulation of Composite Plate Shear Wall-Concrete Encased: Thuc3", J. Struct. Eng., 145(9), 04019088. http://doi.org/10.1061/(ASCE)ST.1943-541X.0002355.   DOI
24 Wang, Y.H. and Nie, J.G. (2015), "Effective flange width of steel-concrete composite beam with partial openings in concrete slab", Mater. Struct., 48, 3331-3342. http://doi.org/10.1617/s11527-014-0402-8.   DOI
25 Yan, W.T., Han, B., Zhu, L., Jiao, Y.Y. and Xie, H.B. (2019), "A fiber beam element model for elastic-plastic analysis of girders with shear lag effects", Steel Compos. Struct., 32(5), 657-670. http://doi.org/10.12989/scs.2019.32.5.657.   DOI
26 Ahn I.S., et al. (2004), "Effective flange width provisions for composite steel bridges", Eng. Struct., 26(12), 1843-1851. http://doi.org/10.1016/j.engstruct.2004.07.009.   DOI
27 GB50917 (2013), Code for design of steel and concrete composite bridges, Ministry of Housing and Urban-Rural Development; Beijing, China.
28 AASHTO LRFD (2010), AASHTO LRFD Bridge Design Specifications. American Association of State Highway and Transportation Officials; Washington, D.C, USA.
29 Aref A.J., et al. (2007), "Effective slab width definition for negative moment regions of composite bridges", J. Bridge Eng., 12(3), 339-349. http://doi.org/10.1061/(asce)1084-0702(2007)12:3(339).   DOI
30 Ballio, G. and Castiglioni, C.A. (1995), "A Unified Approach for the Design of Steel Structures under Low and/or High Cycle Fatigue", J. Constr. Steel Res., 34, 75-101. http://doi.org/10.1016/0143-974X(95)97297-B.   DOI
31 Dezi, L., et al. (2001), "Time-dependent analysis of shear-lag effect in composite beams", J. Eng. Mech., 127(1), 71-79. http://doi.org/10.1061/(ASCE)0733-9399(2001)127:1(71).   DOI
32 Chen, J., et al. (2014), "Closed-form solution for shear lag with derived flange deformation function", J. Constr. Steel Res., 102, 104-110. http://doi.org/10.1016/j.jcsr.2014.07.003.   DOI
33 Chen S.S., et al. (2007), "Proposed effective width criteria for composite bridge girders", J. Bridge Eng., 12(3), 325-338. http://doi.org/10.1061/(asce)1084-0702(2007)12:3(325).   DOI
34 Chiewanichakorn, M., et al. (2004), "Effective flange width definition for steel-concrete composite bridge girder", J. Struct. Eng., 130(12), 2016-2031 http://doi.org/10.1061/(asce)0733-9445(2004)130:12(2016).   DOI
35 Yuan, H., et al. (2016), "Element-based effective width for deflection calculation of steel-concrete composite beams", J. Constr. Steel Res., 121, 163-172. http://doi.org/10.1016/j.jcsr.2016.02.010.   DOI