• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.645-669
• /
• 2004

In seismic analysis of moment-resisting frames, beam-column connections are often modeled with rigid joint zones. However, it has been demonstrated that, in ductile reinforced concrete (RC) moment-resisting frames designed based on current codes (to say nothing of older non-ductile frames), the joint zones are in fact not rigid, but rather undergo significant shear deformations that contribute greatly to global drift. Therefore, the "rigid joint" assumption may result in misinterpretation of the global performance characteristics of frames and could consequently lead to miscalculation of strength and ductility demands on constituent frame members. The primary objective of this paper is to propose a rational method for estimating the hysteretic joint shear behavior of RC connections and for incorporating this behavior into frame analysis. The authors tested four RC edge beam-column-slab connection subassemblies subjected to earthquake-type lateral loading; hysteretic joint shear behavior is investigated based on these tests and other laboratory tests reported in the literature. An analytical scheme employing the modified compression field theory (MCFT) is developed to approximate joint shear stress vs. joint shear strain response. A connection model capable of explicitly considering hysteretic joint shear behavior is then formulated for nonlinear structural analysis. In the model, a joint is represented by rigid elements located along the joint edges and nonlinear rotational springs embedded in one of the four hinges linking adjacent rigid elements. The connection model is able to well represent the experimental hysteretic joint shear behavior and overall load-displacement response of connection subassemblies.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.212-220
• /
• 2015

The engineering plastic of sulfonated polyether ether ketone (SPEEK) as a polymer matrix has been developed in this lab to replace Nafion, solid polymer electrolytes of perfluorosulfonic acid membrane which has several flaws such as high cost, and limited operational temperature above $80^{\circ}C$. The SPEEK was prepared in the sulfonation reaction of polyether ether ketone (PEEK). The organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted tungstosilicic acid (Cs-TSiA) with cross-linking agent contents of 0.01 mL. In conclusion, CL-SPEEK/Cs-TSiA/ceria 1% membrane showed the optimum results such as 0.1882 S/cm of proton conductivity at $80^{\circ}C$, and 99.61 MPa of tensile strength which were better than Nafion 117 membrane.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.151-160
• /
• 2014

CL-SPEEK/Cs-TPA/$CeO_2$ composite membrane was prepared for polymer electrolyte membrane water electrolysis (PEMWE). In order to improve the electrochemical, mechanical, durabilities and electrocatalytic characteristics, engineering plastic of polyether ether ketone (PEEK) as polymer matrix was sulfonated and the organic-inorganic blend composite membranes was prepared by loading cesium-substituted tungstophosphoric acid (Cs-TPA) by titration method with cross-linking agent contents of 0.01mL. Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the PEMWE circumstance and to increase the duration of the membrane. CL-SPEEK/$Cs_{(1)}$-TPA/CeriaIn conclusion, 1% membrane showed the optimum results such as 0.119 S/cm at $80^{\circ}C$ of proton conductivity and 62MPa of tensile strength.

• 한국수소및신에너지학회논문집
• /
• 제25권1호
• /
• pp.1-10
• /
• 2014

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted phophomolybdic acid(Cs-MoPA) with cross-linking agent contents of 0.01mL. In conclusion, CL-SPEEK/$Cs_{(2.5)}$-MoPA/ceria(1%) membrane showed the optimum results such as 0.1095S/cm of proton conductivity at $80^{\circ}C$, 2.906meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 49.73MPa of tensile strength which were better than Nafion 117 membrane.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.437-447
• /
• 2012

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted tungstophosphoric acid (Cs-TPA) with cross-linking agent contents of 0.01 mL. In conclusion, CL-SPEEK/Cs-TPA/ceria (1%) membrane showed the optimum results such as 0.130 S/cm of proton conductivity at $80^{\circ}C$, 2.324 meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 65.03 MPa of tensile strength which were better than Nafion 117 membrane.

• Earthquakes and Structures
• /
• 제22권1호
• /
• pp.1-13
• /
• 2022

When a building suffers damages under moderate to severe loading condition, its physical properties such as damping and stiffness parameters will change. There are different practical methods besides various numerical procedures that have successfully detected a range of these changes. Almost all the previous proposed methods used to work with translational components of mode shapes, probably because extracting these components is more common in vibrational tests. This study set out to investigate the influence of using both rotational and translational components of mode shapes, in detecting damages in 3-D steel structures elements. Three different sets of measured components of mode shapes are examined: translational, rotational, and also rotational/translational components in all joints. In order to validate our assumptions two different steel frames with three damage scenarios are considered. An iterative model updating program is developed in the MATLAB software that uses the OpenSees as its finite element analysis engine. Extensive analysis shows that employing rotational components results in more precise prediction of damage location and its intensity. Since measuring rotational components of mode shapes still is not very convenient, modal dynamic expansion technique is applied to generate rotational components from measured translational ones. The findings indicated that the developed model updating program is really efficient in damage detection even with generated data and considering noise effects. Moreover, methods which use rotational components of mode shapes can predict damage's location and its intensity more precisely than the ones which only work with translational data.

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1185-1191
• /
• 2014

가스터빈 블레이드는 증기터빈 블레이드와 달리 냉각홀 및 냉각유로를 포함한 복잡한 형상으로 되어 있으며 복합화력의 운전특성에 따라 반복적이거나 지속적인 열-기계 하중 조건 하에서 운전된다. 따라서 블레이드는 운전시간에 따라 균일하지 못한 온도 분포나 응력 분포를 보이며, 이는 크리프나 열-기계피로 손상을 유발하며, 결국 가스터빈 블레이드의 수명을 단축시킨다. 결국 다양한 운전 조건에 따라 발생하는 응력을 정확하게 계산하는 것은 설비의 신뢰성을 보장하고 나아가 블레이드와 같은 고온 부품의 정확한 수명을 평가하는데 무엇보다 중요하다. 최근 들어 컴퓨터 기능이 좋아지고 상용 소프트웨어의 성능이 향상되어 실증 시험에 대한 대안으로 유동, 열 및 구조해석을 연결하는 전산해석이 많이 사용되고 있다. 본 논문에서는 가스터빈 실 운전조건을 고려하여 유동-열-구조 해석 기법을 연계하는 유체-구조 연성해석을 통해 블레이드 온도 및 응력분포를 계산하였다. 또한 해석 결과를 토대로 대표적인 손상기구인 크리프 및 열-기계 피로 손상 모델을 이용하여 블레이드의 수명을 평가하였다.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.1-4
• /
• 2019

본 연구에서는 효소연료전지의 율속 반응인 산화극의 효소반응 강화 및 효소 담지량을 증가시키기 위하여 안트라센 가교제를 도입하였다. CNT/PEI 담지체에 가교 처리된 글루코오스 산화효소(GOx)를 전기적인 극성을 이용하여 결합시켰다(AC[CNT/PEI/GOx]). 본 촉매의 성능을 확인하기 위하여 전기화학 평가가 수행되었으며, 성능 비교를 위해 가교제 처리를 하지 않은 CNT/PEI/GOx 촉매도 같이 전기화학 테스트를 진행하였다. 전기화학적 특성 평가들을 통해 글루코오스 산화효소 담지량이 증가한 것을 확인하였으며, 라인위버-버크 방정식 통해 AC[CNT/PEI/GOx] ($K_m$ : 0.73 mM)가 가교제 처리를 하지 않은 CNT/PEI/GOx ($K_m$ : 1.71 mM) 보다 우수한 성능을 지닌 것을 확인했다. 또한, 완전지 성능평가 결과 최대 전력 밀도(Maximum power density, MPD)도 상승($21.2{\mu}W/cm^2$에서 $72.6{\mu}W/cm^2$로)한 것을 볼 수 있었는데 이를 통해 글루코오스 산화효소 담지량 및 전자전달능력이 향상되었다는 것을 재확인 하였다.

• 생명과학회지
• /
• 제29권3호
• /
• pp.382-393
• /
• 2019

상처 치료는 전세계 인류에 영향을 미치는 보건 산업계의 관심사다. 당뇨병과 같은 대사증후군 유병률 증가로 상처에 의한 합병증의 위험이 높아지고 상처치유의 복잡함 때문에 상처의 치료와 관리가 어렵다. 전통적 상처 드레싱은 제한된 보호기능을 제공하며, 상처 드레싱의 치료 능력을 향상시키기 위해 생체고분자 기반의 드레싱들이 개발되고있다. 생체고분자는 생분해성이 뛰어나고 생체적합성이 좋으며 효과적인 상처 관리에 중요한 항균, 항염증, 지혈, 세포증식, 혈관성 활동 등 다양한 효과가 있다. 키토산, 셀룰로오스, 콜라겐, 히알루론산, 알긴산 등의 여러 생체고분자가 이미 상처치유제로 활용되고 있으며 생체고분자를 다른 고분자, 생체활성 분자 및 약물과 결합하여 생리학적 문제 없이 흉터를 최소화하는 새로운 상처 드레싱이 개발되고 있다. 본 논문에서는, 향후의 연구와 활용을 위한 현재의 생체고분자의 상처처리에 대해 알아보았다.