• 한국지반공학회논문집
• /
• 제22권4호
• /
• pp.11-19
• /
• 2006

1990년대 이후로 양방향 재하시험(Bi-directional pile load test)은 기존 재하시험 방법에 대한 장점으로 인해 최근 여러 나라에서 그 사용이 증가하고 있다. 그러나 양방향재하시험은 두부재하시험과 상이한 재하기구를 따르므로 실제 구조물의 거동, 특히 말뚝 두부에서의 하중-변위 거동에 있어 실제와 다른 결과를 줄 우려가 있다. 따라서 본 논문에서는 동일한 형상과 지반조건을 갖는 두 본의 말뚝에 대해 한 본은 두부재하 방식으로, 한 본은 선단부 양방향 재하방식으로 정재하시험을 수행하였으며, 이 때 말뚝 깊이별로 변형률계를 부착하여 말뚝의 하중-전이 기구를 분석하였다. 변형률계 분석으로 구한 말뚝의 깊이별 하중 전이 함수의 모양은 시험방법에 따른 큰 차이를 보이지 않았으나, 양방향 재하시험을 이용하여 기존의 방법으로 추정한 말뚝두부 변위는 두부재하시험으로 구한 변위에 비해 사용하중하에서 1/2 미만인 것으로 나타났다. 양방향 재하시험 결과를 이용하여 보다 정확한 하중-변위곡선을 예측하기 위해 말뚝의 탄성압축량을 고려하는 간단한 방법을 제안하였다. 또한 양방향 재하시험시 변형률계 계측자료를 이용하여 두부재하시험 곡선과 거의 동일한 하중-변위 곡선을 예측할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권1호
• /
• pp.221-229
• /
• 2004

강관말뚝 머리를 확대기초 내에 얕게 근입하는 방법은 작업성과 배근의 용이성 등의 이점 때문에 일본과 우리나라에서 널리 적용되고 있다. 또한 일본은 몇 차례의 시방서 개정으로 말뚝머리 연결방법을 표준화하기에 이르렀고, 다양한 연결방법에 대하여 실험적 연구와 이론적 연구가 축적되었다. 따라서 국내에서도 최근 말뚝머리 보강설계에 대한 연구의 필요성이 대두되어 본 연구에서는 도로교 시방서에서 제시하는 대표적인 강관 말뚝머리 연결부 방법B 속채움방법에 대한 구조적 성능 및 특성을 파악하고자 단순 인발실험 및 단순 압입실험을 실시하여 말뚝머리 연결부의 거동 메카니즘을 규명하고자 한다. 또한 인발 및 압입실험의 결과에서 미끄럼 방지턱을 용접대신 고장력볼트로 접합하여 사용했을 경우 구조적 거동안정성을 파악하고자 한다.

• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.449-460
• /
• 2018

This paper reports the experimental results of three through bolt beam-column connections under pure shear forces using modified push-out tests. The investigated specimens include extended end-plates and six through-bolts connecting square concrete-filled steel tubular column (S-CFST) to steel beams. The main goal of this study is to investigate if and how the mechanical shear connectors, such as steel angles and stud bolts, contribute to the shear transfer mechanisms in the steel-concrete interface of the composite column. The contribution of shear studs and steel angles to improve the shear resistance of steel-concrete interface in through-bolt connections was investigated using tests. The results showed that their contribution is not significant when the beam-column connection is included in the push-out tests. The specimens failed by pure shear of the long bolts, and the ultimate load can be predicted using the shear resistance of the bolts under shear forces. The predicted values of load allowed obtaining a good agreement with the tests results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.393-398
• /
• 2008

With the substantial increase of the size of structure, management and monitoring of excavation for the foundation construction becomes more difficult. Therefore, massive collapses which are related to retaining wall recently increase. However, since the study on measuring and monitoring the pre-stressing force of anchor is insufficient, behavior of anchor may not be predicted and monitored appropriately by the existing strain gauge type monitoring system. FBG Sensor, which is smaller than strain gauge and has better durability and does not have a noise from electromagnetic waves, was adapted to develope a smart anchor. A series of pullout tests were performed to verify the feasibility of smart anchor and find out the load transfer mechanism around the steel wire fixed to rock with grout.

• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.223-232
• /
• 2018

Two novel types of construction detailings, including using the distributive beam and the inner ring diaphragm in the joint between large-section CFT columns and outrigger truss to enhance the transferring efficiency of huge vertical load, and using the T-shaped stiffeners in the steel tube of large-section CFT columns to promote the local buckling capacity of steel tubes, were tested to investigate their working mechanism and design methods. Experimental results show that the co-working performance between steel tube and inner concrete could be significantly improved by setting the distributive beam and the inner ring diaphragm which can transfer the vertical load directly in the large-section CFT columns. Meanwhile, the T-shaped stiffeners are very helpful to improve the local bulking performance of steel tubes in the column components by the composite action of T-shaped stiffeners together with the core concrete under the range of flange of T-shaped stiffeners. These two approaches can result in a lower steel cost in comparison to normal steel reinforced concrete columns. Finally, a practical engineering case was introduced to illustrate the economy benefits achieved by using the two typical detailings.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.415-416
• /
• 2002

Experiments have been conducted to investigate scuffing mechanism in oil lubricated piston-ring /cylinder sliding contacts. Samples were extracted from actual components to simulate the real contact geometry and other influencing conditions. A standard test machine. with some modifications, has been used for the investigation of the effects of surface temperature load and sliding velocity. preliminary tests were carried out to find the critical temperature of scuffing using gradient temperature under a constant load, reciprocating frequency and stroke. The experimental and analytical results show that a transition from lubricated contact to adhesion, accompanied by the phenomena such as material transfer between the two sliding surfaces, local contact welding and temperature rise, and sharp increase in friction coefficient, appears to contribute to the final failure of scuffing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.338-341
• /
• 2006

In recent years, carbon fiber reinforced polymer(CFRP) has been widely used for reinforcement of damaged concrete structures. However, the fundamental mechanisms of load transfer and load-resistance for reinforced concrete beams retrofitted by CFRP are not fully understood. Acoustic emission(AE) technique was used to evaluate the characteristics of damage progress and the failure mechanism of reinforced concrete beams retrofitted by CFRP. In this study, three-paint-bending test has been carried out to investigate the AE characteristics of four specimens. The results show that the AE technique is a valuable tool to study the failure mechanism of reinforced concrete beams retrofitted by CFRP.

• 한국터널지하공간학회 논문집
• /
• 제6권2호
• /
• pp.171-182
• /
• 2004

사질토지반에서 2 Arch 터널을 굴착할 때에 중앙터널의 굴착규모와 인버트 폐합에 따른 중앙필러 및 터널 주변지반의 거동특성을 규명하기 위하여 모형실험을 수행하였다. 3개로 분리되어 수직이동이 가능한 가동판 위에 중앙필러와 모형라이닝을 설치하고 모형지반 조성 후에 가동판을 강하시켜서 중앙터널굴착을 표현하였고, 중앙터널굴착 후에 좌 우측 터널을 굴착하였으며 굴착이 완료된 2 Arch 터널 전체에 대한 가동판을 움직여서 2 Arch 터널굴착에 따른 하중전이 및 지반이완 형태는 물론 중앙필러에 작용하는 하중의 변화를 관찰하였다. 실험중에 가동판, 중앙필러 및 바닥판에 작용하는 이완하중 및 전이하중을 측정하였고, 모형터널의 내부와 지중 및 지표에 변위계를 설치하여 모형터널의 내공변위 및 지반의 변위를 측정하였다. 본 연구결과 시공순서와 라이닝의 기초부 구속조건에 따라 중앙필러가 부담하게 되는 하중의 변화를 확인하였고 2 Arch 터널굴착에 따른 하중전이 및 지반이완형태를 확인하였다.

• Structural Engineering and Mechanics
• /
• 제30권1호
• /
• pp.77-97
• /
• 2008

In this paper, a strut-and-tie model approach has been proposed to directly calculate the amount of reinforcements in deep beams, and the force transfer mechanisms for this approach were investigated using linear finite element analysis. The proposed strut-and-tie model provides quite similar force transfer mechanisms to the results of linear finite element analysis for the 28 deep beams. The load-carrying capacities calculated from the proposed method are both accurate and conservative with little scatter or trends for the 214 deep beams. The deep beams have different concrete strengths including high-strength, various combinations of web reinforcements, and wide range of and a/d ratios. Good accuracy was also obtained using VecTor2, nonlinear finite element analysis tool based on the Modified Compression Field Theory. Since the proposed method provides a safe and reliable means for design of deep beams, this can serve to improve design provisions in future adjustments and development of design guidelines.

• Structural Engineering and Mechanics
• /
• 제62권4호
• /
• pp.443-453
• /
• 2017

The performance of bolted side-plated (BSP) beams is affected by the degree of transverse partial interaction, which is a result of the interfacial slip caused by transverse shear transfer between the bolted steel plates and the reinforced concrete beams. However, explicit formulae for the transverse shear transfer profile have yet to be derived. In this paper, a simplified piecewise linear shear transfer model was proposed based on force superposition principle and simplification of shear transfer profiles derived from a previous numerical study. The magnitude of shear transfer was determined by force equilibrium and displacement compatibility condition. A set of design formulae for BSP beams under several basic load cases was also derived. Then the model was verified by test results. A worked example was also provided to illustrate the application of the proposed design formulae. This paper sheds some light on the shear force transfer mechanism of anchor bolts in BSP beams, and offers a practical method to evaluate the influence of transverse partial interaction in strengthening design.