Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A piecewise linear transverse shear transfer model for bolted side-plated beams

  • Li, Ling-Zhi (Research Institute of Structural Engineering and Disaster Reduction, College of Civil Engineering, Tongji University) ;
  • Jiang, Chang-Jiu (Research Institute of Structural Engineering and Disaster Reduction, College of Civil Engineering, Tongji University) ;
  • Su, Ray Kai-Leung (Department of Civil Engineering, The University of Hong Kong) ;
  • Lo, Sai-Huen (Department of Civil Engineering, The University of Hong Kong)
  • Received : 2015.04.21
  • Accepted : 2017.03.09
  • Published : 2017.05.25
⟨ Previous Next ⟩

Abstract

The performance of bolted side-plated (BSP) beams is affected by the degree of transverse partial interaction, which is a result of the interfacial slip caused by transverse shear transfer between the bolted steel plates and the reinforced concrete beams. However, explicit formulae for the transverse shear transfer profile have yet to be derived. In this paper, a simplified piecewise linear shear transfer model was proposed based on force superposition principle and simplification of shear transfer profiles derived from a previous numerical study. The magnitude of shear transfer was determined by force equilibrium and displacement compatibility condition. A set of design formulae for BSP beams under several basic load cases was also derived. Then the model was verified by test results. A worked example was also provided to illustrate the application of the proposed design formulae. This paper sheds some light on the shear force transfer mechanism of anchor bolts in BSP beams, and offers a practical method to evaluate the influence of transverse partial interaction in strengthening design.

Keywords

Acknowledgement

Supported by : University of Hong Kong

References

  1. Adhikary, B.B., Mutsuyoshi, H. and Sano, M. (2000), "Shear strengthening of reinforced concrete beams using steel plates bonded on beam web: experiments and analysis", Constr. Build. Mater., 14(5), 237-244. https://doi.org/10.1016/S0950-0618(00)00023-4
  2. Ahmed, M., Oehlers, D. and Bradford, M. (2000), "Retrofitting reinforced concrete beams by bolting steel plates to their sides. Part 1: Behaviour and experiments", Struct. Eng. Mech., 10(3), 211-226. https://doi.org/10.12989/sem.2000.10.3.211
  3. Anil, O., Belgin, C.M. and Kara, M.E. (2010), "Experimental investigation on CFRP-to-concrete bonded joints across crack", Struct. Eng. Mech., 35(1), 1-18. https://doi.org/10.12989/sem.2010.35.1.001
  4. Johnson, R.P. and Molenstra, N. (1991), "Partial shear connection in composite beams for buildings", ICE Proceedings, 91(4), 679-704. https://doi.org/10.1680/iicep.1991.17485
  5. Kolsek, J., Hozjan, T., Saje, M. and Planinc, I. (2013), "Analytical solution of linear elastic beams cracked in flexure and strengthened with side plates", J. Compos. Mater., 47(22), 2847-2864. https://doi.org/10.1177/0021998312459780
  6. Li, L.Z., Lo, S.H. and Su, R.K.L. (2013), "Experimental Study of Moderately Reinforced Concrete Beams Strengthened with Bolted-Side Steel Plates", Adv. Struct. Eng., 16(3), 499-516. https://doi.org/10.1260/1369-4332.16.3.499
  7. Newmark, N.M., Siess, C.P. and Viest, I.M. (1951), "Tests and analysis of composite beams with incomplete interaction", Proc. Soc. Exp. Stress Anal., 9(1), 75-92.
  8. Nguyen, N.T., Oehlers, D.J. and Bradford, M.A. (2001), "An analytical model for reinforced concrete beams with bolted side plates accounting for longitudinal and transverse partial interaction", Int. J. Solids Struct., 38(38), 6985-6996. https://doi.org/10.1016/S0020-7683(01)00036-1
  9. Oehlers, D., Ahmed, M., Nguyen, N. and Bradford, M. (2000), "Retrofitting reinforced concrete beams by bolting steel plates to their sides. Part 2: Transverse interaction and rigid plastic design", Struct. Eng. Mech., 10(3), 227-243. https://doi.org/10.12989/sem.2000.10.3.227
  10. Oehlers, D.J., Nguyen, N.T., Ahmed, M. and Bradford, M.A. (1997), "Transverse and longitudinal partial interaction in composite bolted side-plated reinforced-concrete beams", Struct. Eng. Mech., 5(5), 553-563. https://doi.org/10.12989/sem.1997.5.5.553
  11. Siu, W.H. (2009), "Flexural strengthening of reinforced concrete beams by bolted side plates", Ph.D.Dissertation, the University of Hong Kong, Pokfulam Road, Hong Kong.
  12. Siu, W.H. and Su, R.K.L. (2010), "Effects of plastic hinges on partial interaction behaviour of bolted side-plated beams", J. Constr. Steel Res., 66(5), 622-633. https://doi.org/10.1016/j.jcsr.2010.01.002
  13. Siu, W.H. and Su, R.K.L. (2011), "Analysis of side-plated reinforced concrete beams with partial interaction", Comput. Concrete, 8(1), 71-96. https://doi.org/10.12989/cac.2011.8.1.071
  14. Smith, S.T. and Bradford, M.A. (1999), "Local buckling of sideplated reinforced-concrete beams. II: Experimental study", J. Struct. Eng., 125(6), 635-643. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(635)
  15. Su, R.K.L. and Siu, W.H. (2007), "Nonlinear response of bolt groups under in-plane loading", Eng. Struct., 29(4), 626-634. https://doi.org/10.1016/j.engstruct.2006.06.003
  16. Su, R.K.L. and Zhu, Y. (2005), "Experimental and numerical studies of external steel plate strengthened reinforced concrete coupling beams", Eng. Struct., 27(10), 1537-1550. https://doi.org/10.1016/j.engstruct.2005.04.012
  17. Su, R.K.L., Li, L.Z. and Lo, S.H. (2013), "Shear transfer in bolted side-plated reinforced concrete beams", Eng. Struct., 56, 1372-1383. https://doi.org/10.1016/j.engstruct.2013.06.007
  18. Su, R.K.L., Li, L.Z. and Lo, S.H. (2014), "Longitudinal partial interaction in bolted side-plated reinforced concrete beams", Adv. Struct. Eng., 17(7), 921-936. https://doi.org/10.1260/1369-4332.17.7.921
  19. Subedi, N.K. and Baglin, P.S. (1998), "External plate reinforcement for concrete beams", J. Struct. Eng., 124(12), 1490-1495. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1490)
  20. Zhu, Y. and Su, R. (2010), "Behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 2: Evaluation of theoretical strength", Struct. Eng. Mech., 34(5), 563-580. https://doi.org/10.12989/sem.2010.34.5.563
  21. Zhu, Y., Su, R. and Zhou, F.L. (2007), "Seismic behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 1: Experimental study", Struct. Eng. Mech., 27(2), 149-172. https://doi.org/10.12989/sem.2007.27.2.149

Cited by

  1. Flexural capacity model for RC beams strengthened with bolted side-plates incorporating both partial longitudinal and transverse interactions vol.168, pp.None, 2017, https://doi.org/10.1016/j.engstruct.2018.04.069
  2. Numerical simulation of the shear capacity of bolted side-plated RC beams vol.171, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.06.003
  3. The Use of Bolted Side Plates for Shear Strengthening of RC Beams: A Review vol.10, pp.12, 2017, https://doi.org/10.3390/su10124658
  4. Nacre inspired 3D printing construction for high performance structural member vol.275, pp.None, 2019, https://doi.org/10.1051/matecconf/201927502005
  5. Experimental Study on Seismic Strengthening of Confined Masonry Walls Using RPC vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/5095120
  6. Experimental Study on the Shear Performance of Reinforced Concrete Beams Strengthened with Bolted Side-Plating vol.11, pp.9, 2017, https://doi.org/10.3390/su11092465
  7. Experimental study on seismic performance of strengthening masonry wall using hybrid fiber-reinforced reactive powder concrete vol.37, pp.3, 2017, https://doi.org/10.1177/8755293020988012
  8. One-sided shear retrofit of reinforced concrete beams in existing high-rise buildings vol.252, pp.None, 2017, https://doi.org/10.1016/j.engstruct.2021.113634