• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.100-109
• /
• 2017

This paper proposes performance improvement schemes for sensorless PMSM control drive using a four-switch three-phase inverter (so-called B4 inverter). In the proposed scheme, the back-EMF estimation-based sensorless control algorithm is used to control the brushless PMSM without position sensors. In order to have stable operation, this paper presents a gain adjustment scheme that compensates the reduction of stable sensorless operation range as long as the rotor speed increases. In B4 topology, the center point of dc-link capacitors is connected to 3-phase load, and it is prone to have the load current distortion. Hence, to mitigate this problem, a distortion compensation scheme by modifying voltage commands using measured dc-link potentials is proposed in this paper. The validity of the proposed method is evaluated by simulations and experiments.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1646-1654
• /
• 2015

In this paper, a single-switch ZVZCS quasi-resonant CLL isolated DC-DC converter for driving a low-power (less than 100 W) 32'' LED backlighting liquid crystal display television (LCD TV) is proposed. The proposed converter exhibits both forward and flyback operational characteristics. All semiconductors are activated and deactivated under the soft switching conditions during the switching transition without additional active devices. The switching frequency varies less than about 10 kHz for load variations, leading to minimizing the efficiency reduction under light load. Furthermore, the low di/dt and dv/dt by soft switching enhance the electromagnetic interference (EMI) performance above 1 MHz. A theoretical analysis is described in detail, and a 72-W prototype converter verifies the validity of the analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.11-16
• /
• 2004

This paper proposes the overload reduction method for the connection information audit processor in ATM switch. Based on this method, we design the simple IPC exchange method and non-stop auditing method for IPC loss. We evaluate the performance about the proposed Audit method. At the result of evaluation, we figure out that the p개posed audit method reduces the load of call control processor because of a fewer IPC and prevent stopping audit function for IPC loss because of requesting the lost connection information again. Therefore, we confirm that the proposed audit method can reestablish a Mismatched connection information with a little load and elevate correctness about audit function.

• Management Science and Financial Engineering
• /
• v.10 no.2
• /
• pp.89-102
• /
• 2004

In this paper, we deal with a processor assignment problem that minimizes the total traffic load of an ATM switch controller by optimally assigning processors to ATM interface units. We develop an integer programming (IP) model for the problem, and devise an effective tabu search heuristic. Computational results reveal the efficacy of the proposed tabu search procedure, finding a good quality solution within 5% of optimality gap.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.281-284
• /
• 2001

In this paper, we design the Sorting-Banyan network with an efficient buffer and sorting management schema that makes switch be capable of supporting delay sensitive as well as loss sensitive. The proposed switching network is remodeled that based on Batcher-banyan network that have eight input and output ports The structure of designed switching network is constructed of modified banyan network with 2-way routing paths and two plane sorting networks. we have analysed the maximum throughput of the switch, under the uniform random traffic load, the FIFO discipline has increased by about 11% when we compare the switching system with the input buffering system.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.265-268
• /
• 1998

This paper presents a soft-switching average current control PWM high power factor boost converter. Conventional boost ZVT-PWM converter has a disadvantage of hard-switching for auxiliary switch at turn-off. A soft switched auxiliary switch is proposed to achieve a high performance ZVT-PWM boost rectifier. The simulation and experimental results show that soft switching operation can be maintained for wide line and load range, which in turn improves the converter performance in terms of efficiency, switching noise and circuit reliability.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.131-135
• /
• 2005

Stabilization of electric power is the most important thing is such place as computing center having business critical equipment. However, ability to cope with electrical quality shift and power failure is very weak from UPS output side to load in those electricity system, though UPS is generally used for power stabilization. this problem can be solved by duplication of power source using newly configured UPS and small sized transfer switch even in case of UPS failure.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.35-45
• /
• 1999

This paper presents an interconnection network for load balancing on a multimedia server and proposes a simple probabilistic model of the interconnection network for analysing the traffic characteristics. Because the switch uses deflection algorithm for routing, the traffic load on the switch seriously affects deflection probability. In this paper, we trace the deflection probability as a function of the traffic load according to the model. By comparing the result with the empirical result, we prove that the model is useful for estimating the deflection probability and traffic saturation point against the amount of packets getting into the switch.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.146-152
• /
• 2015

In this paper, we propose a boost DC-DC converter using a modification of the passive auxiliary resonant snubber circuit with a DC-DC converter in a typical active auxiliary resonant snubber-bridge inverter. The proposed boost DC-DC converter is small compared to the DC-DC converter according to the soft-switching scheme that requires a general auxiliary switch by realizing the soft switching operation as a DC-DC converter which does not require an auxiliary switch. It is light-weight, switch the turn-on and turn-off switching loss at the time of the superposition of the voltage and current is extremely small, so small. And the reduction of the surge voltage and current of the switch. In addition, the proposed boost DC-DC converter has a high efficiency over a wide load characteristics change area than conventional hard switching PWM boost converter using an RC snubber loss.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.79-82
• /
• 2002

The addition of switches to a distribution feeder does, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder. To cover its service area so that feeder-level delivery reaches sufficiently close to all customers, feeders typically split their routes many times, in what is often called a lateral feeder. It is interesting to note, however, that the effectiveness of a switch is very much dependent on the types of lateral feeder. The types of lateral are classified into two types. The first is loop lateral feeder that can connect its load to an adjacent feeder through a tie line in case that a fault occurs in its feeder and it is laid out so that every feeder has complete fault backup through re-switching of its loads to other sources like a main feeder. The second is the radial lateral feeder cannot connect its load to an adjacent line, no provision is made for contingency backup of feeders. There are no other circuits in the radial lateral feeder form which to restore power. In this study, we evaluate the effectiveness of a switch installation between on the radial and loop lateral feeders to increase reliability by decreasing the duration of the outage. These results can help power utility to design the switch layouts on the radial and loop lateral feeder system.