• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.97-105
• /
• 2014

This article examines the causality relationship among SMP, base-load share, LNG import price, and exchange rate in Korean power market during 2002~2012, using unit root test, cointegration test, and vector error correction model(VECM). The cointegration test shows that 4 variables without unit root have been in the long-run causality. As the results of ECM, SMP is analyzed to have been unilaterally caused from LNG import price and base-load share in the shot-run, while it has been unilaterally caused from LNG import price and exchange rate in the long-run. This article has the following policy implications: the adjustment of exchange rate to reduce he risk of LNG import price and the proper securement of base-load share for the long-run stability of SMP.

• Geomechanics and Engineering
• /
• 제10권5호
• /
• pp.599-615
• /
• 2016

The present research presents experimental and finite element studies to investigate the behavior of piled raft-tunnel system in a sandy soil. In the experimental work, a small scale model was tested in a sand box with load applied vertically to the raft through a hydraulic jack. Five configurations of piles were tested in the laboratory. The effects of pile length (L), number of piles in the group and the clearance distance between pile tip and top of tunnel surface (H) on the load carrying capacity of the piled raft-tunnel system are investigated. The load sharing percent between piles and rafts are included in the load-settlement presentation. The experimental work on piled raft-tunnel system yielded that all piles in the group carry the same fraction of load. The load carrying capacity of the piled raft-tunnel model was increased with increasing (L) for variable (H) distances and decreased with increasing (H) for constant pile lengths. The total load carrying capacity of the piled raft-tunnel model decreases with decreasing number of piles in the group. The total load carrying capacity of the piles relative to the total applied load (piles share) increases with increasing (L) and the number of piles in the group. The increase in (L/H) ratio for variable (H) distance and number of piles leads to an increase in piles share. ANSYS finite element program is used to model and analyze the piled raft-tunnel system. A three dimensional analysis with elastoplastic soil model is carried out. The obtained results revealed that the finite element method and the experimental modeling are rationally agreed.

• 전력전자학회논문지
• /
• 제17권2호
• /
• pp.150-157
• /
• 2012

This paper presents CAN-based parallel-operation and load-sharing techniques for the communication server power supply. With the load information obtained through CAN communication, each modules performs its current control independently and the power unbalance caused by impedance differences of converter modules can be reduced. In conventional method, slave modules are controlled by master module. On the other hand, the proposed load share algorithm uses the Multi-Master method. Therefore, accurate load sharing can be accomplished by the reference structure of each module's average current. Each converter has two stages and it is separated into PFC, which is responsible for harmonic regulation, and LLC resonant converter, which controls output voltage. To verified the performance of the proposed method, two 2KW prototypes has been implemented and experimented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.457-458
• /
• 2011

본 논문에서는 2KW급 LLC 컨버터를 적용한 전원장치의 병렬운전 및 Load Sharing 기법을 제안한다. 각 모듈의 제어기로는 TI사의 TMS320F28035를 사용하였으며 모듈 각각의 독립적인 전압제어를 담당한다. 그리고 Load Share 모드에서는 CAN통신을 사용하여 각 전원장치의 전류제어 및 전압제어를 수행한다. 각 모듈에 전체전류의 1/N의 균일한 전류를 흐르게 하여 각 모듈에 임피던스 불균형으로 인한 스트레스를 줄일 수 있다. 기존방식은 마스터(Master) 모듈의 지령치에 따라 슬레이브(Slave)모듈에서 부한 분담을 수행하는 반면, 제안된 Load Share 알고리즘은 멀티 마스터(Multi-Master: MM) 방식으로써 각 모듈의 평균전류를 레퍼런스로 갖는 구조로 정확한 부하분담을 수행한다.

• 한국컴퓨터정보학회논문지
• /
• 제17권6호
• /
• pp.67-73
• /
• 2012

본 논문에서는 컨퍼런스 서버의 과부하를 방지하기위한 새로운 부하 제어 방식을 사용한 분산형 컨퍼런스 구조를 제안하였다. 본 논문에서 제안한 새로운 이벤트 패키지는 컨퍼런스 부하 제어를 가능하게하고 새로운 컨퍼런스 정보 데이터 포맷은 컨퍼런스 서버들과 컨퍼런스 참가자들 사이의 SIP 메시지 교환 절차 및 부하 분산을 처리하는 데 필요한 요소들이 추가되었다. 또 전체 컨퍼런스 참가자들에게 주기적으로 전송해야 할 컨퍼런스 정보 데이터의 처리도 모든 서버들이 분담하도록 하여 부하를 더욱줄이도록 하였다. 제안한 부하제어 이벤트 패키지는 각 컨퍼런스 서버들이전체 컨퍼런스서버들의현재부하 상태를 실시간으로파악할수 있도록 하며특정서버의부하가커지면 해당 서버는 전체 컨퍼런스 서버 중 가장 부하가 적은 서버를 선택하여 SIP 클라이언트 요청을 분산시키거나 새로운 컨퍼런스 서버를 생성하여 부하를 분산하도록 한다. 제안된 시스템의 성능은 실험을 통하여 분석하였고 평균 지연시간에서 21.6%, 평균 SIP 메시지 처리 시간에서 29.2% 향상됨을 보여주고 있다.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.661-670
• /
• 2014

A new DC/DC converter with zero voltage switching is proposed for applications with high input voltage and high load current. The proposed converter has two circuit modules that share load current and power rating. Interleaved pulse-width modulation (PWM) is adopted to generate switch control signals. Thus, ripple currents are reduced at the input and output sides. For high-voltage applications, each circuit module includes two half-bridge legs that are connected in series to reduce switch voltage rating to $V_{in}/2$. These legs are controlled with the use of asymmetric PWM. To reduce the current rating of rectifier diodes and share load current for high-load-current applications, two center-tapped rectifiers are adopted in each circuit module. The primary windings of two transformers are connected in series at the high voltage side to balance output inductor currents. Two series capacitors are adopted at the AC terminals of the two half-bridge legs to balance the two input capacitor voltages. The resonant behavior of the inductance and capacitance at the transition interval enable MOSFETs to be switched on under zero voltage switching. The circuit configuration, system characteristics, and design are discussed in detail. Experiments based on a laboratory prototype are conducted to verify the effectiveness of the proposed converter.

• 전력전자학회논문지
• /
• 제5권2호
• /
• pp.184-191
• /
• 2000

기존의 2개의 컨버터를 병렬 운전하기 위해서는 2개의 변류기 (CT)가 필요하였으나, 본 논문에서는 1개의 변류기만으로도 2개의 컨버터를 병렬 운전 가능한 단일 전류센서 방식의 마스터-슬레이브 운전 방법을 제안하였다. 제안된 단일 전류센서 방식의 부하 전류 분배 성능을 확인하기 위하여, 2개의 컨버터를 설계, 제작하였고 기존방법 (예: 최대 전류법)과 부하 전류 분배 성능을 세 가지의 임의 조건하에서 시뮬레이션, 부하 실험을 통하여 비교하였다. 실험 결과 컨버터 2대를 병렬 운전하는 경우, 기존의 방법으로는 2개의 CT가 필요하였으나 제안한 단일 전류센서 방식을 이용한면 1개의 CT만으로도 부하 전류 분배가 잘 이루어짐을 확인할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.946-954
• /
• 2004

A model in the form of a Bearing Load Distribution (BLD) matrix in the Multi Bearing Rotor System (MBRS) is established by a transfer matrix equation with the consideration of a bearing load, elevation and uniform load distribution. The concept of Bearing Load Sensitivity (BLS) is proposed and matrices for load and elevation sensitivity are obtained. In order to share MBRS design resources on the Internet with remote customers, the basic principle of Remote Computing (RC) based on the Internet is introduced ; the RC of the BLD and BLS is achieved by Microsoft Active Server Pages (ASP) technology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.395-397
• /
• 2002

Recently, electric heating using midnight power has brought a rapid increase. Therefore, the increase of midnight power use has much influenced on midnight load pattern and share more than 20% of total midnight electricity consumption. Hence, the distortion of load by using midnight power apparatus is severe and made the usage pattern ineffective electricity usage pattern. This paper analyze the load pattern of midnight power apparatus and policies that can effectively build midnight load. In addition, it provides policies on shifting midnight power apparatus load.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.655-658
• /
• 1999

In this paper, Parallel operation of two DC-DC converters which we have ever done before need two CTs to do load current sharing. However, we have proposed a new method called ZCT method that can share load current with only a CT as doing parallel operation two converters with same converter capacity. To confirm parallel performance by a proposed DC-DC converter parallel operation method, we have done computer simulation and experiment. It is certain that we have showed to achieve two converters current sharing performance efficiently through simulation and experiment at result.