• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.291-311
• /
• 2012

The multi-span suspension bridge having double main cables in the vertical plane is investigated regarding endurance of live load distribution in the case of non-displaced pylon and pylon displacement. The coefficient formula of live load distribution described as the ratio of live load on the bottom cable to the top cable is obtained. Based on this formula, some function in respect of this bridge are derived and used to analyze its characteristics. This analysis targets the cable force, the cable sag and the horizontal displacement at the pylon top under live load etc. The results clarified that the performance of the live load distribution and the horizontal force of cables in the case of non-deformed pylon has a similar tendency to those in the case of deformed pylon, and the increase of pylon rigidity can increase live load distributed to the bottom cable and slightly raise the cable horizontal force under live load. However, effect on the vertical rigidity of bridge and the horizontal force increment of cables caused by live load is different in the case of non-deformed pylon and deformed pylon.

• 대한토목학회논문집
• /
• 제7권3호
• /
• pp.175-181
• /
• 1987

개단 강관말뚝의 선단지지력은 폐색 효과에 의하여 발생되는데 이 폐색 효과는 말뚝의 직경에 대한 관입깊이의 비 즉, 상대 관입깊이와 밀접한 관계가 있는 것으로 알려져 있다. 이에 본 연구에서는 폐색 효과를 종합적으로 평가하기 위하여 지반의 상대밀도와 모형말뚝의 상대 관입 깊이를 달리하여 재하시험을 수행하였으며 개단 말뚝의 유효직경을 축소시킬 목적으로 십자 모양의 칸막이 판을 선단에 부착한 모형말뚝에 대한 시험도 병행하였다. 그 결과로서 개단 말뚝은 말뚝의 극한 지지력을 기준으로 폐색효과를 평가할 때 말뚝 타설 지반이 단단할수록 작은 상대관입깊이에서 큰 폐색효과를 얻을 수 있으나 100%의 폐색효과는 지반의 상대밀도에 상관없이 대략 상대관입깊이 25 정도에서 발휘된다는 사실을 알았다. 그리고 칸막이 판의 설치로 인한 폐색효과의 증대는 기대하기 어려운 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제26권8호
• /
• pp.49-58
• /
• 2010

본 연구에서는 점성토지반에서의 이차압밀특성을 규명하기 위해 정규압밀 영역에 대해 표준압밀시험을 수행하고, Yoshikuni가 제안한 탄-점성 압밀이론의 유한차분해석결과를 이용하여 점성토지반의 압밀특성을 조사하였다. 압밀시험은 초기압밀하중 0.8, 1.6, 3.2, 6.4kgf/$cm^2$의 4케이스에 대해 압밀하중 증분비(${\Delta}p/p_0$)를 1.0으로 하여 수행하였다. 또한 압밀하중증분비의 영향을 명확히 하기 위해 압밀하중 증분비를 변화시킨 장기압밀시험을 수행하였다. 얻어진 실내실험결과에 대해 탄-점성 압밀이론을 이용한 수치해석을 실시한 결과, 수치해석결과가 1차압밀과정에서 약간지연(또는 조기진행)되는 결과가 얻어졌지만, 이차압밀과정에 대해서는 잘 일치한 것으로부터 그 적용성을 검증하였다. 또한 일반적인 점성토지반의 모델지반을 작성하고 압밀특성에 영향을 미치는 압밀정수에 대해 수치모델링을 수행하고 그 영향에 대해서 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.202-207
• /
• 2004

An elastic-plastic finite element analysis of fatigue crack closure is performed for plane strain conditions. The stabilization behavior of crack opening level and the effect of mesh size on the crack opening stress are investigated. In order to obtain a stabilized crack opening level for plane strain conditions, the crack must be advanced through approximately four times the initial monotonic plastic zone. The crack opening load tends to increase with the decrease of mesh size. The mesh size nearly equal to the theoretical plane strain cyclic plastic zone size may provide reasonable numerical results comparable with experimental crack opening data. The crack opening behavior is influenced by the crack growth increment and discontinuous opening behavior is observed. A procedure to predict the most appropriate mesh size for different stress ratio is suggested. Crack opening loads predicted by the FE analysis based on the procedure suggested resulted in good agreement with experimental ones within the error of 5 %. Effect of the distance behind the crack tip on the crack opening load determined by the ASTM compliance offset method based on the load-displacement relation and by the rotational offset method based on the load-differential displacement relation is investigated. Optimal gage location and method to determine the crack opening load is suggested.

• Computers and Concrete
• /
• 제1권1호
• /
• pp.15-30
• /
• 2004

In this study, a design process for reinforced concrete structures using the nonlinear FEM analysis is developed. Instead of using the nonlinear analysis to evaluate the required performance after design process, the nonlinear analysis is applied before designing the reinforcement arrangement inside the RC structures. An automatic reinforcement generator for computer aided reinforcement agreement is developed for this purpose. Based on a nonlinear FEM program for analyzing the reinforced concrete structure, a smart fictitious material model of steel, is proposed which can self-adjust the reinforcement to the required amount at the cracking location according to the load increment. Using this tool, the reinforcement ratio required at design load level can be decided automatically. In this paper, an example of RC beam with opening is used to verify the proposed process. Finally, a trial design process for a real size underground RC LNG tank is introduced.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2008

Recently, a demand of nano/micro patterned polymer for display or biochip has been rising. Then many studies have been carried out. Nano/micro-embossing is a deformation process where the workpiece materials is heated to permit easier material flow and then forced over a planar patterned tool. In this work, the hot-emboss process is performed with different forming conditions; forming temperature, load, press hold time, to get the proper condition for linear pattern fabrication on plated-type polymers (PC). Replicated pattern depth increases in proportion to the forming temperature, load and time. Reduction of the workpiece thickness increases according to press hold time. In process of time, reduction ratio of workpiece thickness decreases because of surface area increment of the workpiece and pressure decline on it.