• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.817-819
• /
• 2002

최근 컴퓨터 바이러스와 해킹 기법의 기술적인 향상으로 인하여 바이러스로 인한 피해가 확산되고 있다. 이에 따른 바이러스와 해킹 피해들로부터 시스템과 사용자 데이터를 보호하기 위한 다양한 방법들이 연구 및 적용되어 있다. 하지만 기존의 연구는 이기종으로 구성된 서로 이질적인 네트워크 환경에 적용하고 사용하기 위해서는 많은 수동적인 노력과 시간을 필요로 하고 있다. 본 논문에서는 이기종으로 구성된 네트워크상에서 이동 에이전트를 이용한 바이러스 탐색 기법에 대해 연구하였다. 제시한 방법은 사용자들에게 바이러스 탐색 에이전트와 관련된 해당 호스트상에서의 탐색업무 수행 투명성을 제공하여 호스트의 부하에 큰 영향을 주지 않는 방안으로써 자바 언어 특성인 플랫폼의 독립성이라는 이점을 지원하고 있는 자바 기반의 바이러스 탐색 시스템을 설계하였다. 이는 중앙 집중 관리 형태의 서버기반 방식으로 등록된 지역 네트워크 내의 이질적인 호스트에서 각 호스트의 부하를 고려하여 바이러스 탐색 업무를 수행함으로써 사용자로 하여금 능동성과 자율성, 바이러스 탐색 업무에 있어서의 투명성을 제공할 수 있는 컴퓨터 바이러스 탐색 업무를 수행하는 이동 에이전트 기반의 탐색 시스템을 새롭게 제안한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.185-194
• /
• 2007

This paper presents a motor selection technique for a manipulator design that is used in a multipurpose dog-horse robot. Since the dynamics of a manipulator and its servo drives are closely related to each other, it requires a repetitive analysis to determine a suitable motor. In order to simplify this procedure, Straete et al. proposed a simple normalization method to separate the load dependent terms and the motor dependent terms. This technique is adopted in this paper for selecting a motor in designing a manipulator.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2077-2078
• /
• 2011

Now a days, the induction motor is widely used in industry automation. Without monitoring the motor fault, maintenance cost is increased undesirably high. The slip frequency is included in the feature frequency, so rotating rotor speed is needed. In this paper, a sensorless motor speed estimation method, rotor slot harmonic(RSH) method is suggested and a solution of rotor bar diagnosis is proposed for motor running with light-load. When the rotor is rotating, it shows the harmonic signal of back-emf voltage related with number of rotor slot. So from the power spectrum of current signal, we can find the rotor speed.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.183-186
• /
• 2003

In this paper, we proposed fuzzy adaptive resonance theory(ART) combined with principle component analysis(PCA) to recognize and classify indoor environmental gases. In experiment Taguchi gas sensors(TGS) are used to detect VOCs. Using thermal modulation of operating temperature of two sensors, we extract patterns of gases from the voltage across the load resistance. We use the PCA algorithm to reduce dimension so it needs less memory and shortens calculation time. Simulation is accomplished to two directions for fuzzy ART with and without PCA.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.171-172
• /
• 2011

The paper proposes a close loop control algorithm for Z-source inverter. The algorithm is realized by PWM duty ratio control in order to improve the output voltage to it's desired level. The controller consist of the output voltage PID controller and DC input voltage P controller. Using the DQ coordinate transformation simplify the controller design. The PSIM simulation results verify the validity by means of comparing the system with or without compensation and estimating if the system has output consistency function when ZSI's load and input voltage value changing.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.147-148
• /
• 2011

In this paper, implementation of digital control for critical conduction mode power factor correction (PFC) rectifier is presented. Critical conduction mode is widely used in medium and low power conversion application due to its minimized MOSFET turn-on loss and diode reverse-recovery problem. However, it needs additional zero current detection circuit and maximum frequency limit to properly turn the MOSFET on and avoid the excessive switching loss in light load operation. This paper explains the digital IC implementation and verifies its operation with 200-W prototype PFC rectifier.

• Structural Monitoring and Maintenance
• /
• v.7 no.1
• /
• pp.43-58
• /
• 2020

Pile foundations of existing bridges lie in soil and water environment for long term and endure relatively heavy vertical loads, thus prone to damages, especially after stricken by external forces, such as earthquake, collision, soil heap load and etc., and the piles may be injured to certain degrees as well. There is a relatively complete technical system for quality inspection of new bridge pile foundations without structures on the top. However, there is no mature technical standard in the engineering community for the non-destructive testing technology specific to the existing bridge pile foundations. The quality of bridge pile foundations has always been a major problem that plagues bridge maintenance. On the basis of many years' experiences in test engineering and theoretical studies, this study developed a new type of detection technology and equipment for the existing bridge piles.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.5
• /
• pp.66-72
• /
• 2002

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear power plant. However, effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. Acoustic emission(AE) has been widely used in various fields because of its extreme sensitivity, dynamic detection ability and location of growing defects. In this study, we investigated failure modes of locally wall thinned pipes and AE signals by bending test. From test results, we could be divided four types of failure modes of ovalization, crack initiation after ovalization, local buckling and crack initiation after local buckling. And fracture behaviors such as elastic region, yielding region, plastic deformation region and crack progress region could be evaluated by AE counts, accumulative counts and time-frequency analysis during bending test. The result of the frequency range is expected to be basic data that can inspect plants in real-time.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.113-116
• /
• 2003

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. In this paper, proposes a method for efficiently generating test pattern which detect faults in BiCMOS circuits. In proposed method, BiCMOS circuit is divided into pull-up part and pull-down part, using structural property of BiCMOS circuit, and we generate test pattern using set theory for efficiently detecting faults which occured each divided blocks.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.1
• /
• pp.22-27
• /
• 2004

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. In BiCMOS circuits, transistor stuck-open faults exhibit delay faults in addition to sequential behavior. In this paper, proposes a method for efficiently generating test pattern which detect stuck-open in BiCMOS circuits. In proposed method, BiCMOS circuit is divided into pull-up part and pull-down part, using structural property of BiCMOS circuit, and we generate test pattern using set theory for efficiently detecting faults which occured each divided blocks.