• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.71-80
• /
• 2008

본 논문에서는 보강토 구조물에 보강재로 적용되는 지오그리드의 시간 의존적 변형거동 특성에 대한 광폭 인장시험 결과를 제시하였다. 먼저, 다양한 보강재의 종류에 대해 인장속도에 따른 파단강도 및 강성의 변화에 대해 알아보았다. 또한 보강토 구조물이 사용연한 동안 받게될 다양한 하중 조건, 즉 지속하중 및 반복하중을 작용시킬 수 있는 장비를 특수 제작하여 지오그리드의 시간의존적 변형거동을 분석하였다. 그 결과 지속하중 및 반복하중 작용시 잔류변형은 보강재의 점성(viscous) 특성의 형태로서 쌍곡선 특성 곡선으로 잘 모사되는 것으로 분석되었으며 이러한 잔류변형은 시간의존적 점성거동의 측면에서 다루어야 하는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제23권3호
• /
• pp.141-147
• /
• 2007

말뚝의 동적 응답 해석을 위한 다양한 방법들이 개발되어 있으며, 이 중에서 비선형 스프링, p-y 곡선을 이용하여 지반-말뚝 상호작용을 고려하는 방법이 널리 사용되고 있다. 그러나, 현재 사용되는 동적 p-y 곡선은 정적 또는 주기 하중에 의한 횡방향 재하 시험에 의해 개발되었다. 또한, p-y 곡선에 scaling factor를 도입하여 액상화에 의한 지반-말뚝 상호작용의 영향을 모사하고자 하는 시도가 이루어져 왔으나, 지금까지 정확한 scaling factor를 산정하지 못하고 있는 실정이다. 이에 본 연구에서는 Ig 진동대 실험으로부터 구한 말뚝 주변 지반의 과잉간극수압과 지반-말뚝 시스템의 고유진동수 관계 및 수치해석으로부터 구한 말뚝 주변 지반의 탄성계수의 변화와 지반-말뚝 시스템의 고유진동수 관계로부터, 말뚝 주변 지반의 탄성계수의 변화로 표현되는 p-y 곡선의 scaling factor를 구하였다. 그 결과, scaling factor는 과잉간극수압비에 따른 지수 함수의 형태로 나타났다.

• Structural Monitoring and Maintenance
• /
• 제10권1호
• /
• pp.87-105
• /
• 2023

Seismic regulations have been updated from time to time to accommodate an increase in seismic hazards. Comparison of seismic fragility of the existing bridges in Indonesia from different historical periods since the era before 1990 will be the basis for seismic assessment of the bridge stock in Indonesia, most of which are located in earthquake-prone areas, especially those built many years ago with outdated regulations. In this study, seismic fragility curves were developed using incremental non-linear time history analysis and more holistically according to the actual strength of concrete and steel material in Indonesia to determine the uncertainty factor of structural capacity, βc. From the research that has been carried out, based on the current seismic load in SNI 2833:2016/Seismic Map 2017 (7% probability of exceedance in 75 years), the performance level of the bridge in the era before SNI 2833:2016 was Operational-Life Safety whereas the performance level of the bridge designed with SNI 2833:2016 was Elastic - Operational. The potential for more severe damage occurs in greater earthquake intensity. Collapse condition occurs at As = F_PGA x PGA value of bridge Era I = 0.93 g; Era II = 1.03 g; Era III = 1.22 g; Era IV = 1.54 g. Furthermore, the fragility analysis was also developed with geometric variations in the same bridge class to see the effect of these variations on the fragility, which is the basis for making bridge risk maps in Indonesia.

• 한국압력기기공학회 논문집
• /
• 제18권1호
• /
• pp.19-25
• /
• 2022

Nuclear Power Plants (NPP) should be designed to have sufficient safety margins and to ensure seismic safety against earthquake that may occur during the plant life time. After the 9.12 Gyeongju earthquake accident, the structural integrity of nuclear power plants due to the beyond design basis earthquake is one of key safety issues. Accordingly, it is necessary to conduct structural integrity evaluations for domestic NPPs under beyond design basis earthquake. In this study, the Level 3 LBB (Leak Before Break) evaluation was performed by considering the beyond design basis earthquake for the surge line of a OPR1000 plant of which design basis earthquake was set to be 0.2g. The beyond design basis earthquake corresponding to peak ground acceleration 0.4g at the maximum stress point of the surge line was considered. It was confirmed that the moment behaviors of the hot leg and pressurized surge nozzle were lower than the maximum allowable loading in moment-rotation curve. It was also confirmed that the LBB margin could be secured by comparing the LBB margin through the Level 2 method. It was judged that the margin was secured by reducing the load generated through the compliance of the pipe.

• 대한토목학회논문집
• /
• 제28권2A호
• /
• pp.187-196
• /
• 2008

이 연구에서는 단순 트러스 모델을 이용한 철근콘크리트 바닥판의 펀칭전단강도 평가방안을 제안하였다. 철근콘크리트 바닥판의 펀칭전단 해석의 본질적인 어려움을 극복하기 위해 집중하중이 작용하는 바닥판을 펀칭전단 파괴 형태에 기초하여 펀칭콘과 나머지 부분의 소구조체로 구분하였다. 펀칭콘의 강도는 이상화한 트러스의 경사압축부재의 강성도로써 유도되었다. 수평변위를 제어하고 있는 롤러지점의 수평방향 스프링 부재의 강성도는 펀칭콘 내에 포함된 철근에 의하여 결정되었다. 3차원 구조물의 2차원화에 따른 오차와 해석과정에 포함되지 않은 나머지 소구조체의 강성도 등에 기인하는 불확실성들을 포함하기 위하여 경사압축재의 초기각은 실험결과들에 대해 주인장 철근비를 변수로 수행된 회귀분석을 통하여 구하였다. 단순 트러스 모델로부터 구한 펀칭전단강도는 실험결과와의 비교에서 신뢰성이 높은 것으로 나타났다. 단순 트러스 모델의 스냅스로우(snap-through)좌굴해석으로부터 구한 펀칭전단강도는 철근콘크리트 바닥판의 펀칭전단강도의 검토에 유용하게 사용될 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.137-149
• /
• 2023

In this study, to explore the working performance of the CFST split spherical node wind power tower, two groups of CFST split spherical joint plane towers with different web wall thicknesses and a set of space systems were analyzed. The tower was subjected to a low-cycle repeated load test, and the hysteresis and skeleton curves were analyzed. ABAQUS finite element simulation was used for verification and comparison, and on this basis parameter expansion analysis was carried out. The results show that the failure mode of the wind power tower was divided into weld tear damage between belly bar, high strength bolt thread damage and belly rod flexion damage. In addition, increasing the wall thickness of the web member could render the hysteresis curve fuller. Finally, the bearing capacity of the separated spherical node wind power tower was high, but its plastic deformation ability was poor. The ultimate bearing capacity and ductility coefficient of the simulated specimens are positively correlated with web diameter ratio and web column stiffness ratio. When the diameter ratio of the web member was greater than 0.13, or the stiffness ratio γ of the web member to the column was greater than 0.022, the increase of the ultimate bearing capacity and ductility coefficient decreased significantly. In order to maximize the overall mechanical performance of the tower and improve its economy, it was suggested that the diameter ratio of the ventral rod be 0.11-0.13, while the stiffness ratio γ should be 0.02-0.022.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.268-275
• /
• 2023

적층제조 기술의 지속적 발전 및 적용 산업의 확대에 따라 제조된 금속 부품의 전반적인 품질 및 성능을 향상 시키기 위한 서포트 최적 설계 수행은 필수적이 되었다. 따라서 본 논문은 금속 적층제조 공정에서의 서포트 설계변수가 서포트 강성에 미치는 영향을 분석하였다. 대표적인 서포트 설계변수인 서포트 종류, 간격, 침투 깊이를 다양하게 적용한 인장시편을 적층제조를 통해 제작하고, 이에 대한 인장시험을 통해 변위-하중 곡선의 차이를 분석하였다. 그 결과를 바탕으로 서포트 설계변수가 지지 강성에 미치는 영향에 대한 포괄적인 분석을 제시하였다. 이를 통해 적층제조 공정 중 금속 부품의 열 변형을 억제하기 위한 서포트 최적설계 수행을 효과적으로 할 수 있을 것이라 기대된다.

• 풍력에너지저널
• /
• 제14권2호
• /
• pp.26-33
• /
• 2023

In this study, the global response characteristics of floater and mooring for floating offshore wind turbine with a detachable mooring system are performed. Global motion and structural response result extracted from the coupled motion analysis of 10MW DTU floating offshore wind turbine with detachable mooring system modeled by high-order boundary element model and finite element mesh, were used to study the characteristics of tension on mooring lines subjected to three different types of ocean loads. Breaking limit of mooring line characterized by wind, current and wave load has a major effect on the distribution of mooring tension found in time domain analysis. Based on the numerical results of coupled motion analysis, governing equation for calculating the motion response of a floater under ocean loads, and excitation force and surge motion and tension respectively are presented using excursion curve. It is found that the response of floater is reliable and accurate for calculating the tension distributions along the mooring lines under complex loadings. This means that the minimun breaking limit of mooring system satisfied a design criteria at ultimate ocean environmental loading condtions.

• 대한치매학회지
• /
• 제22권2호
• /
• pp.61-68
• /
• 2023

Background and Purpose: Analyzing brain amyloid positron emission tomography (PET) images to access the occurrence of β-amyloid (Aβ) deposition in Alzheimer's patients requires much time and effort from physicians, while the variation of each interpreter may differ. For these reasons, a machine learning model was developed using a convolutional neural network (CNN) as an objective decision to classify the Aβ positive and Aβ negative status from brain amyloid PET images. Methods: A total of 7,344 PET images of 144 subjects were used in this study. The 18F-florbetaben PET was administered to all participants, and the criteria for differentiating Aβ positive and Aβ negative state was based on brain amyloid plaque load score (BAPL) that depended on the visual assessment of PET images by the physicians. We applied the CNN algorithm trained in batches of 51 PET images per subject directory from 2 classes: Aβ positive and Aβ negative states, based on the BAPL scores. Results: The binary classification of the model average performance matrices was evaluated after 40 epochs of three trials based on test datasets. The model accuracy for classifying Aβ positivity and Aβ negativity was (95.00±0.02) in the test dataset. The sensitivity and specificity were (96.00±0.02) and (94.00±0.02), respectively, with an area under the curve of (87.00±0.03). Conclusions: Based on this study, the designed CNN model has the potential to be used clinically to screen amyloid PET images.

• 풍력에너지저널
• /
• 제14권3호
• /
• pp.83-90
• /
• 2023

The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value G_Ic were 1.357 kJ/m2 and 1.397 kJ/m2, respectively, and Mode-II critical strain energy release rate values G_IIc were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.