• 제목/요약/키워드: List angle

검색결과 28건 처리시간 0.019초

Radiation measurement and imaging using 3D position sensitive pixelated CZT detector

  • Kim, Younghak;Lee, Taewoong;Lee, Wonho
    • Nuclear Engineering and Technology
    • /
    • 제51권5호
    • /
    • pp.1417-1427
    • /
    • 2019
  • In this study, we evaluated the performance of a commercial pixelated cadmium zinc telluride (CZT) detector for spectroscopy and identified its feasibility as a Compton camera for radiation monitoring in a nuclear power plant. The detection system consisted of a $20mm{\times}20mm{\times}5mm$ CZT crystal with $8{\times}8$ pixelated anodes and a common cathode, in addition to an application specific integrated circuit. The performance of the various radioisotopes $^{57}Co$, $^{133}Ba$, $^{22}Na$, and $^{137}Cs$ was evaluated. In general, the amplitude of the induced signal in a CZT crystal depends on the interaction position and material non-uniformity. To minimize this dependency, a drift time correction was applied. The depth of each interaction was calculated by the drift time and the positional dependency of the signal amplitude was corrected based on the depth information. After the correction, the Compton regions of each spectrum were reduced, and energy resolutions of 122 keV, 356 keV, 511 keV, and 662 keV peaks were improved from 13.59%, 9.56%, 6.08%, and 5%-4.61%, 2.94%, 2.08%, and 2.2%, respectively. For the Compton imaging, simulations and experiments using one $^{137}Cs$ source with various angular positions and two $^{137}Cs$ sources were performed. Individual and multiple sources of $^{133}Ba$, $^{22}Na$, and $^{137}Cs$ were also measured. The images were successfully reconstructed by weighted list-mode maximum likelihood expectation maximization method. The angular resolutions and intrinsic efficiency of the $^{137}Cs$ experiments were approximately $7^{\circ}-9^{\circ}$ and $5{\times}10^{-4}-7{\times}10^{-4}$, respectively. The distortions of the source distribution were proportional to the offset angle.

핵의학과 Video Display Terminals Syndrome 유해 요인 조사 및 개선에 관한 연구 (The Study on Risk Factors Analysis and Improvement of VDT Syndrome in Nuclear Medicine)

  • 김정수;김승정;이홍재;김진의;김현주;한인임;주영수
    • 핵의학기술
    • /
    • 제14권1호
    • /
    • pp.61-66
    • /
    • 2010
  • VDT는 Video Display Terminals의 약어로 시각 표시 단말기를 뜻한다. 최근 핵의학과에 VDT가 대량 보급되면서 점차적으로 사용자들이 늘어남과 동시에 사용 기간이 급증함에 따라 VDT 증후군에 관심이 높아지고 있다. 본 연구는 서울대학교병원 핵의학과를 대상으로 VDT 유해 요인 평가 도구를 적용하여 그 실태를 조사하고 문제점을 발견하여 향후 개선에 관한 방안을 도출함으로써 VDT 증후군에 관한 의식을 정립하고 궁극적으로 예방하는 데 목적이 있다. 서울대학교병원 핵의학과를 본원 핵의학과, 소아 핵의학과, PET 센터의 3개 파트로 분류하고, 2009년 4월 한 달 동안 현재 근무 중인 방사선사 23명을 대상으로 근무 부서를 직접 방문하여 유해 요인을 평가하였다. 평가에 사용한 도구는 원진 노동환경건강연구소의 "VDT작업에 관한 체크리스트"를 적용하였고 VDT 작업 조건, 업무 책상의 조건, 의자의 조건, 키보드의 조건, 모니터의 조건, 작업 자세, 보건 관리 특성, 기타 작업 환경의 8개 부문, 총 55개 항목을 통하여 현장 조사 및 평가하였으며 이에 대한 분석 결과는 한림대학교 성심병원 산업의학과에서 검증하였다. 서울대학교병원 핵의학과의 VDT 작업 조건은 비교적 양호한 수준이었다. 책상의 경우 최근 도입한 경우에는 인체공학적 설계로 사용자에게 적합하였으나 기존 책상의 15%는 기준치에 미달하였다. 의자의 경우는 기준에 적합하였지만 노후화로 인하여 적정 기능을 상실한 것이 5%였다. 키보드는 98%가 기준에 적합하였고 모니터는 화면의 각도 조절은 모두 가능하였지만 위치 조절이 불가능한 것이 38%로 조사되었다. 작업 자세의 경우 부적절한 자세로 장시간 노출되는 경우가 10%였으며 일부 항목에서 기준에 적합하지 않은 것으로 조사되었다. 보건 관리 측면에서도 개선의 여지가 있는 것으로 나타났다. 또한 조명과 온도, 소음, 환기 등 기타 작업 환경은 일부 항목에서 문제점이 발견되었지만 권고치를 충족하였다. 핵의학과 업무는 과거에 비하여 육체적인 업무는 줄었으나, 장시간 정적인 자세로 고도의 정밀도와 집중력을 요구하게 되었으며 이는 필연적으로 VDT 증후군을 유발하는 계기가 되었다. VDT 증후군은 앞으로도 지속적으로 발생할 가능성이 높으며 개선에 대한 경제적 비용이 상당하다는 점과 다양한 발병 요인을 내재하며 본인도 모르는 사이에 발생한다는 점에서 보다 구체적이며 효율적인 관리 체계가 필요할 것으로 판단된다. 핵의학과의 VDT 증후군은 인체공학적 사무 환경의 개선, 업무 절차(procedure)의 개선과 업무의 효율화, 직원간의 협동작업(teamwork) 그리고 규칙적인 운동, 꾸준한 스트레칭 체조와 같은 사용자 스스로의 노력, 지속적인 관심과 작은 노력으로 충분히 개선될 수 있으며 적극적으로 예방할 수 있을 것으로 사료된다. 이것은 쾌적한 업무 환경속에서 사용자의 육체적, 정신적 상태를 최상으로 이끌고 업무 효율성의 증대와 함께 내부 고객 만족도 상승으로 이어질수 있을 것으로 판단된다.

  • PDF

애니메이션(센과 치히로의 행방불명)에 대한 기호학적분석 (An Semiotic analysis on Spirited Away)

  • 이윤희
    • 방송과미디어
    • /
    • 제10권1호
    • /
    • pp.99-112
    • /
    • 2005
  • 영상기호학을 이끌었던 선구자인 메츠는 영화를 일종의 언어로서, 여러 약호들이 상호작용하는 의미화작용의 영역으로 보았다. 그는 영화를 상호 양립할 수 있는 영화적 약호들과 상호 대체적인 하위 약호들의 조합으로 보았으며, 영화의 텍스트는 작용하고 있는 약호들의 목록이 아니라 끊임없는 재구조화와 전치의 작업이라고 간주했다. 본 논문에서는 메츠의 기호학적 입장을 받아들여, 미야자키 하야오의 애니메이션 (센과 치히로의 행방불명)에서 중요하게 나타나는 약호의 흐름을 고찰했다. 전반적으로 (센과...)라는 애니메이션에서는 조명의 약호, 색상의 약호, 움직임의 약호, 작가 주의적 약호들이 특별히 의미 있게 다루어지고 있다. 특히 이 애니메이션 전체에서 강한 상징적 의미를 가지는 다리 신들 중 첫 번째를 골라, 각각의 샷에서 어떠한 하위 약호들이 서로 대립하며 구사되는지를 살펴보았다. 첫 번째 다리 신은 크게 목욕탕(즉, 유바바) 대 치히로(와 하쿠)라는 구도로 이루어져 있다. 목욕탕은 단순한 건물로서가 아니라 아직 등장하지 않은 유바바의 대리인이자 치히로의 대립점으로 기능한다. 각각의 샷에서 프레이밍, 시선, 앵글, 움직임의 약호 내의 모든 하위 약호들은 치히로와 목욕탕의 대조를 극대화시키는 방향으로 구사되고 있으며, 가장 눈에 띄는 약호는 움직임이다. (센과 치히로의 행방불명)에서 각각의 약호 내의 하위 약호들은 끊임없이 경쟁하고 교환되며 캐릭터들 간의 대조를 극대화하고 내러티브를 발전시키는 방향으로 구사되고 있음을 볼 수 있다. 영화는 복수약호적 매체로서 유사언어의 실천이라는 메츠의 말처럼, 이러한 약호와 하위 약호들의 조합과 전치는 언어와 다르지만 유사한 방식으로 관객과 커뮤니케이션하고 있는 것이다.

$Smartpeg^{TM}$의 고압멸균소독 및 재사용이 임플랜트 안정성 지수(ISQ) 측정에 미치는 영향 (THE EFFECT OF AUTOCLAVE STERILIZATION AND REUSE OF $SMARTPEG^{TM}$ ON THE IMPLANT STABILITY QUOTIENT (ISQ) MEASUREMENT)

  • 강인호;김명주;임영준;김창회
    • 대한치과보철학회지
    • /
    • 제45권5호
    • /
    • pp.644-652
    • /
    • 2007
  • Statement of problem: Resonance frequency analysis is evaluated as the non-invasive and objective method for the evaluation of implant stability and has been increasingly used. It is necessary to evaluate the factors affect the ISQ measurement stability. Purpose: This study was performed to evaluate the effect of the autoclave sterilization and reuse of $Smartpeg^{TM}$ on ISQ measurement. Material and methods: $SmartPeg^{TM}$ (Integration Diagnostics Ltd., $G\ddot{o}teborg$, Sweden) of autoclave group (A) was autoclave sterilized 9 times and $Smartpeg^{TM}$ of reuse group (R) was reused 9 times. Ten $SmartPeg^{TM}s$ were allocated to each group and after each autoclave sterilization and reuse, implant stability quotient (ISQ) values were measured 3 times from the two directions a and b at a right angle. $Osstell^{TM}$ mentor (Integration Diagnostics Ltd. $G\ddot{o}teborg$, Sweden) was used and type 1 (article no. 100353) $Smartpeg^{TM}$ was selected according to $Smartpeg^{TM}$ reference list. Osstem Implant US II future (Osstem Co., Seoul, Korea) in $4.0mm{\times}11.5mm$ was embedded in the self-curing acrylic resin ($Orthojet^{(R)}$, Lang Dental, U.S.A.). Data was statistically analyzed by one-way ANOVA $({\alpha}=.05)$ and scheffe test was done where a significant difference exist. Correlation test was also done between ISQ value and the number of autoclave sterilization or reuse. Results: 1. In autoclave group, the means and sd. of ISQ value before autoclave sterilization were $84.97{\pm}0.41,\;84.93{\pm}0.74$ at direction a and b. There was significant differences between autoclave groups at direction a and b (P=.000). 2. In reuse group, the means and sd. of ISQ value before reuse were $85.40{\pm}0.62,\;85.50{\pm}0.57$ at direction a and b. There was no significant difference between reuse groups at direction a and b (P>.05). 3. There was a weak positive correlation between the number of reuse and ISQ value at direction a and b (${\gamma}=.207$ and .246, P<.01). Conclusion: Within the limitations of this study, the following conclusions were drawn. Till ninth reuse of $Smartpeg^{TM}$, the ISQ measurement stability did not be affected. After twice autoclave sterilization of $Smartpeg^{TM}$ the ISQ measurement stability was affected.

재난유형별 최적 위성영상 분석을 위한 위성 궤도 시뮬레이션 연구 및 적용 : 태풍 미탁(2019) 사례 (Research and Application of Satellite Orbit Simulation for Analysis of Optimal Satellite Images by Disaster Type : Case of Typhoon MITAG (2019))

  • 임소망;강기묵;황의호;유완식
    • 한국지리정보학회지
    • /
    • 제25권4호
    • /
    • pp.210-221
    • /
    • 2022
  • 재난·재해에 신속하게 대응하기 위하여 다양한 센서의 위성영상 활용이 가능한 뉴스페이스 시대가 열렸다. 국내·외 운용 중인 위성의 수가 늘어나고 위성 센서의 특성이 다양하므로, 재난유형에 최적화된 위성영상을 찾는 것이 필요하다. 재난 유형은 태풍, 호우, 가뭄, 산불 등으로 나누고 각 재난유형별로 위성의 궤도, 능동/수동 센서, 공간 해상도, 파장대, 재방문주기를 고려한 최적의 위성 영상을 선정하였다. 각 위성궤도 TLE(Two Line Element) 정보는 SGP4(Simplified General Perturbations version 4) 모델에 적용하여 위성궤도 시뮬레이션 알고리즘을 개발하였다. 개발된 알고리즘은 위성 궤도를 10초 간격으로 시뮬레이션하고 각 센서의 입사각을 고려하여 정확한 관측영역을 선정하였다. 위성궤도 시뮬레이션 알고리즘을 2019년 태풍 미탁 사례에 적용하여 실제 촬영된 위성 리스트와 비교 및 분석하였다. 분석된 결과를 통해 재난 발생 지역의 촬영된 영상과 촬영 예정인 영상의 시간 및 영역을 수 초 이내 분석하여 재난 유형에 따른 최적의 위성영상을 선정하였다. 향후, 재난이 발생했을 때 위성영상을 신속하게 요청하고 확보할 수 있는 체계 구축에 기반이 되고자 한다.

필름과 BIS 영상장치를 이용한 광/방사선조사야 일치성 비교평가 (A Comparison of coincidence between the Light field & the Radiation field using film and BIS)

  • 방동완;석진용;정윤주;최병돈;박진홍
    • 대한방사선치료학회지
    • /
    • 제16권2호
    • /
    • pp.33-41
    • /
    • 2004
  • 목적 : 선형가속기의 정도관리 항목 중 광조사야와 방사선조사야의 일치성 검사는 기존에 필름을 이용하여 측정하였다. 하지만 필름을 이용한 측정은 측정관찰자에 따라 오차가 크게 발생하여 이를 개선하기 위해 BIS(Beam Image System) 영상장치를 이용하여 필름과 조사야 일치성을 비교평가 하고자 하였다. 대상 및 방법 : 선형가속기를 이용하여 필름과 BIS 영상장치에 6, 15MV의 광자선을 조사하여 측정하였다. 조사야는 각각 $50{\times}50,\;100{\times}100,\;200{\times}200mm^2$지었고, 갠트리 각도는 필름을 사용시 $0^{\circ}$에서 측정하였고, BIS 영상장치를 사용시에는 $0^{\circ}$$270^{\circ}$에서 측정하였다. 그리고 조사야 일치성 측정은 필름을 사용시 눈금자와 필름 스캐너를 이용하였고, BIS 영상장치에서는 스캔된 광조사야와 방사선조사야의 폭을 X축과 Y축으로 각각 측정하여 그 오차값을 구하였다. 결과 : 필름을 이용한 관찰자의 시각적인 측정에서는 광조사야보다 방사선조사야가 더 크게 측정되었으며, 최대 1.9mm의 오차값을 보였다. 필름 스캐너를 이용한 측정에서도 방사선조사야가 더 크게 측정되었으며, 평균 오차값의 크기는 더 작은 값을 보였다. BIS 영상장치를 이용한 측정에서는 필름 사용시와는 반대로 갠트리 $0^{\circ}$$270^{\circ}$에서 광조사야가 방사선조사야보다 더 크게 측정되었고, 최대 0.96mm의 오차값을 보였다. ${\Delta}X$, Y축 모두 허용오차의 범위는 $<{\pm}2mm$로 나타났다. 측정된 평균 ${\Delta}X$, Y 오차값은 시각적인 필름측정, 필름스캐너 측정, BIS 순으로 작게 나타났다. 결론 : 본 연구의 측정결과, 필름을 이용한 시각적인 조사야 일치성 평가시에는 관찰자에 따른 측정오차의 값이 크게 나타날 수 있으므로 정확한 정도관리를 위해서는 세심한 주의로 측정할 것과 필요하다면 다른 영상장치의 도움이나 측정도구의 개발로 정확한 측정이 필요하다 하겠다.

  • PDF

1920년대 소비에트 구성주의 패션에 관한 연구 (A Study on Soviet Constructive Fashion in 1920s)

  • 조윤경;금기숙
    • 복식
    • /
    • 제36권
    • /
    • pp.183-203
    • /
    • 1998
  • The wave of Avant-garde swept away all in the unique social background so called 'October Revolution' and the early 1900 Russian society which was able to absorb and accept anything. The Russian avant-garde has been affected by the Cubism and the Futurism those had peculiarly appeared in the early twentieth century, spreaded out to three spheres: the Suprematism, the Rayonism and the Constructivism. The Russian Constructivism has appeared in this background, concretely and ideally ex-pressed the ideology of the revolution into the artistic form and made an huge influence to the whole Russian society. The Constructivist like Tatlin, naum Gabo, Pevaner, Rodchenko, Stepanova, Popova and Exter gave great effect on the Soviet Constructive fashion design in 1920's after the Revolution. The Soviet costume in 1920s hold in common the characteristicss of the Constructive graphic as it is, geometrical and abstractive form, energetic and motility. In fashion design, these graphic qualities have been showed as the application of geometrical form and architectural image, physical distortion and transformation. And in textile design, the simple, dynamical presentation has been appeared. We can classify the Soviet costume at this time into three occasions. The first term is from late 1910 th mid 1920, and it is altered from folk costume design to modern one. With Lamanova as the first on the list, using the folk mitif, the Constructive expression of simple form has been gradually revealed in design. Designers like Makarova, Pribylskaia and Mukhina produced the plane, simple chemise style with the decoration of the Russian traditional motif. From early to late 1920 is the second term, and it is at the pick of the most active processing of the Constructive design. Not only at the costume in daily life but also at the theatrical costume and textile, the con-structive design has been represented all avail-able fields. Many Constructivists including Stepanova, Popova, Exter and Rodchenko took part in the textile design and costume design so as to evlvo their aesthetic concept. The third term is from late 1920 to early 1930. The socialistic realism has dominated over the whole culture and art, the revolutionary dynamic motif has been presented also in textile design. The formative features of Soviet Constructive fashion design are; silhouette, from, motif, color and fabric. The first, the silhouette : a straight rectangular silhouetted has been expressed through the whole period and a volumed one with distorted human body shape has introduced in the theatrical costume design. The second, the form: many lengthened rectangular forms have been made at beginnings, but to the middle period, geometrical, architectural forms have been more showed and there are energy and movement in design. At the last period, only a partial feature-division has been seen. The third, the motif; no pattern or ethnic motif has been partly used at beginnings, a figure like circle, tri-angle has gradually appeared in textile design. At latter period, a real-existent motif like an airplane has been represented with graphing and simplicity. The fourth, the color ; because of insufficient dyeing, neutral color like black or grey color has been mainly covered, but after middle term, a primary color or pastel tone has been seen, contrast of the fabric; without much development of textile industry after the Revolution, thick and durable fabrics have been the main stream, but as time had going to the last period, fabrics such as linen, cotton, velvet and silk have been varously choesn. At the theatrical costume, new materials like plastics and metals that were able to accentuate the form. The pursuit of popularity, simplicity and functionalism that the basic concept of Constructive fashion is one of the "beauty" which has been searching in modern fashion. And now we can appreciate how innovative and epochal this Soviet Constructive fashion movement was.ement was.

  • PDF

국립중앙박물관 소장 산률(山律) 선우영(鮮于英) 필(筆) <금강산 묘길상도> (The First North Korean Painting in the Collection of the National Museum of Korea: Myogilsang on Diamond Mountain by Seon-u Yeong)

  • 이성미
    • 미술자료
    • /
    • 제97권
    • /
    • pp.87-104
    • /
    • 2020
  • 산률(山律) 선우영(鮮于英)(1946~2009) 필(筆) <금강산 묘길상도>(2000)는 국립중앙박물관이 소장하게 된 최초의 북한 화가 작품이다. 지금까지 알려진 <묘길상도> 가운데 가장 큰 종축(縱軸) 형식으로 크기가 세로 130.2cm, 가로 56.2cm에 이르는 지본수묵진채(紙本水墨眞彩) 그림이다. 선우영에 관하여는 최근 우리나라에도 수차례 개최된 전시회에서 비교적 잘 알려졌다. 그는 1989년 공훈예술가, 1992년 인민예술가 칭호를 받는 등 이른바 '진채세화(眞彩細畫)'의 대가로서 북한을 대표하는 화가가 되었고, 60여 점의 작품이 북한 국보로 지정되었다. 이 그림의 주제인 <묘길상> 마애불은 금강산 내금강 지역에 있는 만폭동 골짜기의 높이 40m 벼랑 아래에 15m 정도 크기로 새겨진 고려시대의 마애불이다. 이 마애불의 명칭은 마사연(摩詞衍) 동쪽에 있었던 묘길상암(妙吉祥庵)에서 유래한다. 마애불의 오른쪽 옆 바위에는 직암(直庵) 윤사국(尹師國)(1728~1709)이 쓴 '묘길상(妙吉祥)'이라는 큼직한 음각의 글씨가 새겨져 있다. 필자는 불상의 수인(手印)을 오른손과 왼손이 모두 엄지와 약지(藥指)가 만나는 하품하생인(下品下生印)과 비슷하지만 왼손이 아래를 향하고 있지 않고 오른손과 거의 직각을 이루며 복부에 놓여있으므로 설법인(說法印)으로 보았다. 즉 이 불상은 설법인을 결하고 있는 석가상(釋迦像)이라고 결론지었다. 선우영의 <금강산 묘길상도>는 조선시대 같은 주제의 그림들과 비교하면 불상의 자연 환경, 즉 벼랑 아래 감실에 새겨진 불상이라는 점과 불상이 인간의 모습이 아닌 암각상임을 수묵진채로 표현한 유일한 그림이다. 구도와 색감이 자아내는 초현실주의적 분위기 또한 이 <금강산 묘길상도>의 특징이라 하겠다. 이 그림을 포함한 선우영의 대부분 작품이 진채로 바위 질감을 사실적으로 표현한 그림이지만 그의 만년작 <파도>(2008)와 같이 전통적의 수묵화에 가까운 그림도 그렸던 폭넓은 작품 세계를 보여주는 화가이다.