• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.417-420
• /
• 2006

The composition and structure of dendrite phase within $Zr_{76.11}Ti_{4.20}Cu_{4.51}Ni_{3.16}Be_{1.49}Nb_{10.53}$ bulk metallic glass (BMG) were confirmed by using an EPMA, XRD and TEM, respectively. The chief elements of dendrite phase were Zr-Ti-Nb and had a BCC structure. The thermal properties of this BMG have been then subsequently investigated by using a differential scanning calorimeter (DSC). The glass transition and crystallization onset temperatures were determined as $339.7^{\circ}C$ and $375.8^{\circ}C$ for this alloy, respectively. Mechanical properties have also been examined by conducting a series of uniaxial compression tests at various temperatures within supercooled liquid region under the strain rates between $10^{-4}/s$ and $3{\times}10^{-2}/s$. The deformation behavior of BMG composite within supercooled liquid region is similar to one of Vit-1 exhibiting amorphous single phase alloy. The flow stresses of BMG composite, however, are entirely higher than those of Vit-1 because dendrite phases are interfere with moving of atoms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.432-441
• /
• 2008

In this study, the control performance of a Tuned Liquid Mass Damper(TLMD) manufactured to reduce the orthogonal bi-directional responses of building structures was experimentally evaluated. the TLMD using only one control device reduce bi-directional responses of building structures by making the TLMD behave as TMD and TLCD to the strong and weak axial direction of building structures. first, the control performance was evaluated by forcing sinusoidal waves to a test model that the TLMD is installed on the scale-downed building structure. Second, the real-time hybrid shaking table test was performed to evaluate the performance of the vibration control system made up of numerical part as a scale-downed building structural model and a physical experimental part as a TLMD. the superiority of bi-directional vibration control performance of the manufactured TLMD was verified by comparing the uncontrolled and controlled results of these tests.

• 한국진공학회지
• /
• 제13권4호
• /
• pp.182-188
• /
• 2004

이전의 연구에서의 소스 형태는 전기화학적 방법으로 에칭된 텅스텐 선에 코일형태의 히터를 부착한 것으로 액체금속을 직접 가열하는 방법이었다. 이전의 모델에서는 액체금속을 가열하는 과정에서 코일형태의 히터에 대한 과다한 전력소모가 발생함으로써 본 연구에서는 코일형태의 히터를 대체할 수 있는 새로운 방법을 제시하고 그의 특성을 연구하였다. Pre-etching된 250$\mu\textrm{m}$의 텅스텐 선을 7mm 단위로 절단, 이를 갈륨저장소로 만든 형태이다. 가열방식은 직접방식으로 갈륨을 저장소에 적재(loading)하는 과정과 빔의 안정도가 이전의 방법보다 더욱 향상되었음을 본 연구의 결과를 통해 볼 수 있다.

• 대한화학회지
• /
• 제11권4호
• /
• pp.143-149
• /
• 1967

액체 구조에 관한 천이상태 이론을 벤젠과 사염화탄소의 이성분 액체 혼합물에 적용시켰다. 각 성분의 상태합으로부터 액체 혼합물계의 상태합을 구하고, 이것으로부터 전체압, 부분압, 몰부파, 혼합엔트로피 및 압축율 등의 열역학적 성질을 여러 온도에서 계산하였다. 계산 결과는 문헌에서 얻은 실험값과 근사적으로 일치함을 발견하였다.

• Journal of Pharmaceutical Investigation
• /
• 제29권4호
• /
• pp.279-285
• /
• 1999

Retinoids in anti-wrinkle cosmetics are widely used for the treatment of the photoaging skin these days, but very unstable in the presence of water. Multilamellar liquid crystal vesicles consisted of $poly(oxyethylene)_{15}oleyl$ ether $(POE_{15}OE)$ or $poly(oxyethylene)_{15}stearyl$ ether $(POE_{15}SE)$, cetostearyl alcohol (CSA) and cholesterol or oils were prepared to increase the stability of retinyl acetate or retinyl palmitate. $POE_{15}SE-CSA-Water$ systems were more unstable than $POE_{15}SE-CSA-Water$ systems due to the bended structure of oleyl groups. For the modification of vesicles, cholesterol was added. The enthalpy values were decreased reaching to zero and the water permeability of systems was decreased, but the stabilizaton of retinyl acetate was not greatly improved. The stability of retinyl acetate may depend on its location in the structure. Various oils were added for further stabilization and isopropyl myristate was most effective. In practice, retinyl palmitate showed better stability in the same vesicle than retinyl acetate, and the improved vesicles could be used for the anti-wrinkle cosmetics

• 대한화학회지
• /
• 제10권1호
• /
• pp.18-24
• /
• 1966

액체 내에는 분자들 주위에 분자크기의 빈자리가 들어 있게 되어 빈자리로 뛰어들면서 기체와 같은 자유도를 갖는 분자와, 빈자리에서 좀 떨어져서 고체와 같은 자유도를 갖는 분자와, 빈자리 때문에 변형에너지를 받고서 천이상태에 있는 분자들이 있다고 가정하여 액체에 대한 상태함을 유도하여 알곤, 질소, 벤젠, 클로로포름 및 이황화탄소의 액체상태에서의 열역학적 성질들을 계산한 결과 실측치와의 좋은 일치를 얻었다.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.251-257
• /
• 2004

The nature of the nematic liquid crystal (LC) alignment induced by the rubbed polyimide (PI) alignment layers (ALs) and the electro-optical (EO) properties of the LC cells are expected to depend on the chemical and physical features of the PI. By employing five pyromellitic dianhydride (PMDA)-type PIs having different functionalities, we have studied the effects of the PI's structure and chemistry on the alignment characteristics and the cell's EO properties. Increasing the flexibility of the PI increases the pretilt angle and tends to improve the alignment stability. On the other hand, the rigid, fluorinated PI displays poor stability for LCs and induces a less stable/uniform LC alignment and, subsequently, a small pre tilt angle. It also transpired that fluorination of the PI deteriorated the voltage-transmittance characteristics and the voltage holding ratio; increasing the flexibility of the PI structure improves these EO properties. The finding that the qualitative trends for the PI's functionalities are similar for both the alignment and EO properties suggests that the EO properties are closely related to the alignment characteristics, which are determined by short-range interactions between LC and PI molecules.

• Composites Research
• /
• 제34권3호
• /
• pp.180-185
• /
• 2021

기존 아민계 경화제를 사용해 액정 에폭시를 경화할 경우, 랜덤 한 3차원 네트워크 구조의 생성으로 인해 phonon의 산란이 많이 발생하기 때문에 열전도도가 낮게 나타났다. 이러한 문제를 mesogen그룹을 적층된 구조로 형성하는 양이온 개시제를 이용하여 해결하기 위해 본 연구에서는 아민계 경화제와 양이온 개시제를 사용한 에폭시의 TGA분석(Thermogravimetric Analysis)을 통해 등온 열분해 활성화에너지를 조사하여 열적안정성을 비교하였다. 양이온 개시제를 이용한 에폭시의 경우 활성화가 에너지가 높았으며 기존 실험과 비교했을 때, 열적안정성은 열전도도와 비슷한 양상을 보인다.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.331-338
• /
• 2021

Ti-Al-Si target and Cr-Si target are sputtered alternately to develop a multi-layered nitride coating on a steel mold to improve die-casting lifetime. Prior to the multi-layer deposition, a CrN layer is developed as a buffer layer on the mold to suppress the diffusion of reactive elements and enhance the cohesive strength of the multi-layer deposition. Approximately 50 nm CrSiN and TiAlSiN layers are deposited layer by layer, and form about three ㎛-thickness of multi-layered coating. From the observation of the uncoated and coated steel molds after the acceleration experiment of liquid metal injection casting, the uncoated mold is severely eroded by the adhesion of molten metallic glass. On the other hand, the multi-layer coating on the mold prevents element diffusion from the metallic glass and mold erosion during the experiment. The multi-layer structure of the coating transforms the nano-composite structured coating during the acceleration test. Since the nano-composite structure disrupts element diffusion to molten metallic glass, despite microstructure changes, the coating is not eroded by the 1,050 ℃ molten metallic glass.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.150-152
• /
• 2022

본 연구의 목적은 LTC(Liquid Time-constant Network)를 기반으로 감각 뉴런의 동작과 시냅스 가소성을 고려한 모델을 제안하는 것이다. 이를 위해 뉴런 연결 구조를 뉴런의 수가 증가하는 형태, 감소하는 형태, 증가 후 감소하는 형태, 감소 후 증가하는 형태의 4가지로 설정하여 실험을 진행하였다. 변경한 모델의 성능이 LTC에 비해 개선되었는지 알아보기 위한 데이터는 시계열 예측 데이터셋을 사용하였다. 실험 결과, 감각 뉴런의 모델링을 적용하는 것은 항상 성능 향상을 불러오는 것은 아니지만 데이터셋의 종류에 따라 적절히 학습 규칙을 선택하는 것을 통해 성능이 향상됨을 관찰하였다. 또한, 뉴런의 연결 구조는 4개 층 이하일 때 향상된 성능을 보였다.