• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.654-657
• /
• 2003

We obtained amorphous calcium carbonate through the carbonation reaction of $Ca(OH)_2$, and through this reaction, observed changes in particle shape and phase by electric conductivity, XRD and TEM analysis. According to the result of the analysis, in the first declining stage of electric conductivity, amorphous calcium carbonate that has formed is coated on the surface of $Ca(OH)_2$ and obstructs its dissolution, and in the first recovery stage of electric conductivity, amorphous calcium carbonate is dissolved and re-precipitated and forms chains of fine calcite particles linearly joined. In the second decline of conductivity, viscosity increases due to the growth of chains of calcite particles, and finally the calcite particles are dissolved and separated into colloidal crystalline calcite, thereby increasing electric conductivity again.

• 한국수소및신에너지학회논문집
• /
• 제1권1호
• /
• pp.40-47
• /
• 1989

The sulfur-iodine thermochemical water splitting process of GA(General atomic) cycle was studied to produce hydrogen from water by $H_2-I_2-SO_2$ reactions. The experimental scale was 500g based on iodine. The reaction took 100 minutes, products could be separated two liquid phases due to their density difference:HI solution had a density of 2.39~2.61g/cc, and $H_2SO_4$ solution had 1.37~1.38g/cc. The condition of reaction was when weight ratio of $I_2/H_2O$ was 2/1 resulting in good phase separation and productivity.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.937-938
• /
• 2006

Tungsten heavy alloys with different ratios of Mo and Ni-Fe matrix were liquid-phase-sintered to investigate their microstructural evolution. Results indicated that increased Mo in the alloy promoted the formation of a (W,Mo)(Ni,Fe) type intermetallic compound in the furnace-cooled condition. It was a monoeutectic reaction when the added Mo content was higher than 49at.%, or a eutectic reaction when this value was between 37at,% to 49at.%. When Mo was added between 25at.% to 37at.%, the precipitation of the intermetallic compound took place by either a eutectoid or peritectoid reaction.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.2034-2040
• /
• 2007

Efficient catalytic systems, where Ni or Pd is introduced in a supporting material of nanoporous carbon, have been developed for a liquid-phase hydrogenation of carboxylic acids and ketones at room temperature. It has been found that the catalysts reliably show high activities and selectivities for the hydrogenation to alcohols even in acidic conditions, and the catalytic activities depend on the preparative method of catalysts, the hydrogen pressure, the agitation rate, and the catalytic species. The hydrogenation of carboxylic acids and ketones clearly shows that the reaction rate is affected by the electronic and the steric effects, and a plausible reaction mechanism using metal hydrides as catalytic species is proposed.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.515-520
• /
• 2020

The Ti₃SiC₂ MAX phase was synthesized by arc-melting process under three different processing times. We confirmed that the reaction between the TiC_X phase and Ti-Si liquid phase is important for the synthesis of the Ti₃SiC₂ MAX phase. Results suggest that the Ti₃SiC₂ MAX phase decomposed when the arc-melting time was greater than 80s. Herein, we aim to determine the detailed parameters for the reported arc-melting process, which can provide useful insights on the synthesis of the Ti₃SiC₂ MAX phase by arc-melting process. Furthermore, we compared the electrical characteristics and densities of the three samples.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.228-236
• /
• 2009

본 연구에서는 $SF_6$ 가스 포접 하이드레이트 결정이 생성되고 성장하는 메커니즘의 특성을 기술하였다. 실험은 일정한 압력과 온도에서 2상 실험($SF_6$ 기상/수용액상)과 3상 실험($SF_6$ 기상/수용액상/$SF_6$ 액상)의 서로 다른 두 가지 상 조건에서 이루어졌다. 두 조건 모두 기체 영역과 수용액 영역 사이의 경계면에서 하이드레이트 결정의 수지상이 섬유상 형태로 상향 성장하는 거동을 보였다. 3상 실험의 경우 하이드레이트 생성이 진행됨에 따라, 반응기 내부압의 감소로$SF_6$ 액상에서 생성된 기포가 기체와 수용액 계면의 막에 도달하여 기포의 표면이 하이드레이트로 전환되었다. 본 논문에서는 결정의 핵생성과 이동, 성장, 간섭을 중심으로 $SF_6$ 가스하이드레이트 결정의 성장 특성을 기술하였다.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.395-399
• /
• 2014

Operation characteristics of the sequencing batch reactor (SBR) process with electro-flotation (EF) as a solid liquid separation method (EF-SBR) were investigated. EF-SBR process showed excellent solid-liquid separation performance which enabled to separate biosolids from liquid phase within 30 min and to extend cyclic reaction time. Although influent organic loading rate was increased stepwise from 5 to 15 g COD/day, food to microorganisms (F/M) ratio could be maintained about 0.3 g COD/g VSS/day in EF-SBR because biomass concentration could be easily controlled at desired level by EF. However, it was impossible to increase biomass concentration at the same level in control SBR (C-SBR) process because solid-liquid separation by gravity settling showed a limitation at higher mixed liquor suspended solids (MLSS) concentration with 60 min of settling time. Total chemical oxygen demand (TCOD) removal efficiency of EF-SBR process was not decreased although influent organic loading rate became 3 times higher than initial value. However, it was seriously deteriorated in C-SBR process after increasing the rate over 10 g COD/day, which was accounted for insufficient organic removal by relatively higher food to microorganisms (F/M) ratio as well as biosolids wash-out by a limitation of gravity sedimentation.

• 폴리머
• /
• 제24권3호
• /
• pp.418-430
• /
• 2000

알칼리키토산과 프로필렌옥사이드를 반응시킴에 의해 유방성 및 열방성 액정상을 형성하는 새로운 히드록시프로필키토산(HPCTO)을 합성함과 동시에 HPCTO/메탄올의 유방성 액정용액에 glyoxal첨가하여 주형시킴에 의해 HPCTO의 가교필름들을 제조하였다. 가교필름들의 열 및 팽윤 특성을 검토하였다. 필름들은 cholesteric 액정상의 특징적인 지문조직을 나타내었으며 이들의 pitch는 온도 및 가교제의 농도가 증가할수록 증가하였다. 가교시료들은 물과 메탄을 중에서 이방성 팽윤을 나타내었으며, 이러한 사실은 HPCTO분자들간에 2차원적인 가교가 우선적으로 일어남을 시사한다. 이방성 팽윤의 정도는 용매의 종류에 크게 의존하나 검토된 가교제의 농도에는 의존하지 않았다.

• 한국재료학회지
• /
• 제11권7호
• /
• pp.585-589
• /
• 2001

많은 연구결과들은 국부적 용융체의 존재가 고온인장 변형 시 발생하는 내부공극의 발달을 억제할 수 있음을 보고하고 있다. 그러나 이러한 국부적 용융체가 존재한다고 해서 반드시 고변형속도 초소성 현상이 관찰될 수 있는 것은 아니다. 금속기지와 보강재간의 계면에 국부적 용융체의 양이 너무 많이 존재하면 두상간의 결합력이 떨어져 금속기지상으로부터 보강재가 분리되는 현상이 야기될 수 있기 때문이다. 그러므로, $Si_3$$N_{4p}$ 2124 Al 복합재의 초소성 유동 특성을 이해하기 위해 변형온도에 따른 미세구조 변화와 계면특성을 조사하였다. 본 연구를 룽해 $Si_3$$N_{4p}$ 2124 Al 복합재에서 Al-기지와 $Si_3$$N_{4p}$ 강화상간의 계면상의 국부적 용융이 시작되는 온도부근에서는 큰 초소성 특성이 얻어지지만, 국부적 용융이 시작되는 온도를 지난 인장온도범위에서는 오히려 초소성 특성이 현저하게 저하되는 현상이 관찰되었다. 위의 실험결과는 $Si_3$$N_{4p}$ 2124 Al복합재의 고변형속도 초소성 거동에 기여하는 최적의 액상량이 존재한다는 것을 의미한다.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.109-114
• /
• 2004

A sensitive method for quantitation of glimepiride in human plasma has been established using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS). Glipizide was used as an internal standard. Glimepiride and internal standard in plasma sample was extracted using diethyl etherethyl acetate (1 : 1). A centrifuged upper layer was then evaporated and reconstituted with the mobile phase of acetonitrile-5 mM ammonium acetate (60:40, pH 3.0). The reconstituted samples were injected into a $C_{18}$ reversed-phase column. Using MS/MS in the multiple reaction monitoring (MRM) mode, glimepiride and glipizide were detected without severe interference from human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]$^+$) at m/z 491 and a corresponding product ion at m/z 352. And the internal standard produced a protonated precursor ion ([M+H]]$^+$) at m/z 446 and a corresponding product ion at m/z 321. Detection of glimepiride in human plasma by the LC-ESI/MS/MS method was accurate and precise with a quantitation limit of 0.1 ng/mL. The validation, reproducibility, stability, and recovery of the method were evaluated. The method has been successfully applied to pharmacokinetic studies of glimepiride in human plasma.