• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.2
• /
• pp.91-95
• /
• 2019

A new experimental approach is proposed to detect a specific polymer dissolved in a liquid. Distinctive optical properties were found using a laser scattering technique when there is a polymer compound with almost no difference in optical properties (index of refraction) in a liquid phase. The index of refraction, which determines the refraction of light, is obtained by dissolving PCL and PLA. The used samples are biodegradable materials with similar properties and dissolved in a mixture of Chloroform 7: Methanol 3. To predict the optical properties, a 632-nm diode laser was used as the light source of the device, and an integrating sphere was used as the light receiver. Although PCL and PLA had a similar index of refraction of 1.46-1.48, the dissolved PCL showed a relative transmittance of 43%, and the dissolved PLA had a relative transmittance of 34%. The difference in optical properties of the pure polymer compound in the solid state or liquid state is not significantly different, and the difference in the dissolved state in the specific solvent is remarkable because the solubility differs in a specific solution and is randomly distributed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.61-70
• /
• 2001

As important factors determining human sensorial comfort, liquid moisture management and surface properties of heat resistant workwear materials were examined. To figure out liquid moisture management properties of the test materials, absorption capacity, rate of absorption, and evaporation properties were assessed. A modified GATS(Gravimetric Absorbency Testing System) was used to measure the liquid moisture accumulation associated with the wicking of liquid moisture from sweating skin. The GATS procedure measures demand wettability of materials to take up liquid in a direction perpendicular to the fabric surface and it was modified to incorporate a special test cell and cover to assess absorption behavior in the presence of evaporation. Fabric stiffness, smoothness, number and the length of surface fibers, and an estimate of the contact area between the skin and fabric surface were measured to characterize the mechanical and surface properties of the test materials. Also an estimate of the force with which a fabric clings to moist skin was made using as wet-cling index.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.4
• /
• pp.282-289
• /
• 2001

This study analyzed the relationship between the physical properties of soil and the compression index of the soft clay in Gyungnam coastal region. Tests of physical and mechanical properties of soil have been carried out under the undisturbed condition at 82 Gimhae, 18 Jinhae and 27 Geojespecimens. The result showed that Terzaghi & Peck's empirical equation of the compression index were not applicable. The compression index of soft clay in Gyungnam coastal region was correlated with the water contents, the liquid limit and the initial void ratio. Among these, the initial void ratio showed the highest correlation with the compression index of soft clay in Gyungnam coastal region and the relationship is shown in the following. (1) The compression index of soft clay in Gyungnam coastal region is represented as follows: $C_c=0.74(e_o-0.7$ (2) The relationship between compression index and the swelling index in Gyungnam coastal region is represented as follows: $C_s=(1/8-1/15)C_c$.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.2
• /
• pp.55-66
• /
• 1988

This study was conducted to investigate the various engineering properties and correlationshops among the soil constants of alluvial clayey deposits distributed in the bay of Asan and their results are summarized as follows : 1. Grain size distribution of soil was consisted of 12 % of clay, 46-73 % of silt, 2-23 % of sand, and as for the consistency characteristics, 26-36 % of liquid limit, 18-21 % of plastic limit and 6-16 % of plastic index, and so the soil belonging to as a lower plastic nonorganic clay, it's specific gravity was 2,66-2.70, and the location on the plastic chart was approximately above the A-line. Z The natural moisture content and unit weight were 30-43 % and 1.76-1.87 g I cm$_3$, respectively, and according to increment of natural moisture content, the unit weight was decreased, and the initial void ratio and degree of saturation were shown of 0,87-1119 and 92- 100 %, most of saturated. 3. Cone resistance value which was shown 2.4 - 6.5 kg / $cm^2$ was a little lower and it was increased with the depth of layer and shown the formular $q_c=0.7_z+1.32$. 4. Unconfined compression strength was about 0.18-0.43kg /$cm^2$, cu, 0.1-0.22kg / $\psi$, $2-6^{\circ}$ under uu-test condition of triaxial, and CCU, 0.08-0.3 kg/cm , $\psi$, $12-18^{\circ}$ under the condition of cu-test. 5. Pre-consolidation load of characteristics of consolidation was 0.4-0.8 kg / $cm^2$, compression index, about 0.17-0.33. 6. Liquid limit and plastic index were incresased with the increment of clay content but most of alluvial clay was appeared as a normal through non-activity clay soil shown more natural moisture content than liquid limit, and their relationship as follows : LL=0.38( cy+54.8), PI=0.836(LL -17.8), PI =0.468(LL -0.48) 7. The initial void ratio presented correlationship of positive among clay content, natural moisture content and liquid limit, and that of reverse with unit weight, and their results as follws : $e_o=0.024(w_n+0.2)$, $e_o=e_o=0.0003c_y+0.0005 LL+0.0151 W_n+\frac{3.58}{r-t}-1.52$ 8. It was shown that the compression index has correlationship of postive among the clay content, liquid limit, plastic index, natural moisture content and initial void ratio, and their relationships as follows ; $c_c=0.44(e_o-0.47)$, $c_c=0.001$

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.61-70
• /
• 2019

This study aimed to investigate the physicochemical characteristics of fish meal, bone meal, and sesame oil cake, which are readily available by-products from agriculture and fisheries, during the process of liquid fertilizer fermentation, and to examine the effects of liquid fertilizer application on seed germination and growth of tomatoes. During processing the fermentation for liquid fertilizers by using fish meal, bone meal, and sesame oil cake liquid fertilizers, the pH of the fertilizer increased in the order of bone meal > fish meal > sesame oil cake, and the concentration increased rapidly up to 30 days in all types of liquid fertilizer. The nitrogen content of the liquid fertilizers increased as fermentation progressed in the order of fish meal > bone meal > sesame oil cake. The phosphorus content increased as fermentation progressed and the highest was 1.0 % in the liquid fertilizer of sesame oil cake. The germination rate and its index of radish seeds were compared for different dilutions of each of the liquid fertilizers. Excluding the 10-fold dilution of the fish meal and oil cake liquid fertilizer, all the treatment groups showed a germination rate ≥ 95 % and the germination index tended to increase with dilution rate of liquid fertilizers. For responses of tomato growth, there were no significant differences among the liquid fertilizer treatment groups; however, the organic content, microbial density, and microbial biomass C in the soil were higher than chemical fertilizer treatment. These results demonstrated that there were differences in the characteristics of liquid fertilizers depending on the materials used, and that liquid fertilizer can be used for nutrition management for the organic crop cultivation.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.432-440
• /
• 2011

The objective of this study was to investigate growth and fruiting characteristics (e.g., nut qualities) of chestnut (Castanea cerenata) after applying various fertilizer treatments at the cultivation site in Suncheon. Fertilizer treatments were designed as follow: liquid fertilizer, chemical fertilizer, organic fertilizer, and control. Both liquid and chemical fertilizer treatments provided the best growth in height and basal diameter. In addition, these two treatments were very effective for crown width of the trees between both east-west and north-south orientation. The liquid fertilizer treatment was effective on total length of the fruiting branch and length of the bearing to terminate part. Both liquid and chemical fertilizer treatments produced the longest length of basal to bearing part compared to the other two treatments. The liquid fertilizer treatment showed the most thickened basal diameter of the fruiting branch and the greatest diameter of above and below the bearing burr part. Elongation Index of the fruiting branch (EI) was the highest with liquid fertilizer treatment and the remaining four indices (Production Index of fruiting branch, PI; Ratio of Diameter between below and above bearing burr part, RD; Growth Index of fruiting branch diameter, GI; Thickness Index of fruiting branch or dormant branch, TI) were the highest with the chemical fertilizer treatment. Total number of produced branch per fruiting mother branch and number of small and weak branches per fruiting mother branch were highest on the control and liquid fertilizer treatment; however, all treatments produced similar numbers. The chemical and organic fertilizer treatments produced a high number of fruiting branches per fruiting mother branch, while organic and liquid fertilizer treatments produced a high number of burr per fruiting branch. The rate of commercializing on the basis of nut weight and quantity was higher on control (87.5%) than chemical fertilizer treatment (84.6%); however, the rate was even lower on liquid fertilizer treatment (84.3%) and organic fertilizer treatment (82.7%). The liquid fertilizer treatment showed the highest average of nut weight, while chemical fertilizer treatment showed the highest average number of fruiting burr. There was no significant difference in average number of normal nuts per burr among treatments. The yield per tree was high on chemical (8.2 kg) and liquid (8.0 kg) fertilizer treatments, but there was no significant difference among treatments. In the rate of nut grade on the basis of nut weight and quantity, the liquid fertilizer treatment, 43.5% and 34.3% more than large nut respectively, produced higher value chestnuts compared to other treatments.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.947-951
• /
• 2005

Rotating compensator multichannel spectroscopic ellipsometry has been employed to determine the optical functions of various liquids used in chemistry. We attempted three different measurement configurations: (1) air-liquid interface, (2) prism-liquid interface, and (3) liquid-sample interface. In prism-liquid interface, we found that the prism surface had roughness and it should be considered in analysis for accurate results. In liquidsample interface, we had much higher reflection, better sensitivity, and less limitation compared to the other two configurations when crystalline silicon was used as reference sample. We discuss the merit of each configuration and present the optical functions of various liquids. Also we demonstrate Bruggeman effective medium theory to determine the optical properties of mixed liquid.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.57-65
• /
• 2005

In this paper, for the highly plastic marine soft clay distributed in west and southern coast of Korean peninsula of Kwangyang and Busan New Port areas, correlation between compression index and other indices representing geotechnical engineering properties such as liquid limit, void ratio and natural water content were analyzed. Appropriate empirical equations of being able to estimate the compressibility of clays in the specific areas were proposed and compared with other existing empirical ones. For analyses of the data and test results, data for marine clays were used from areas of the South Container Port of the Busan New Port, East Breakwater, Passenger Quay, Jungma Reclamation and Reclamation Containment in the 3rd stage in Kwangyang. In order to find the best regression model by using the commercially available software, MS EXCEL 2000, results obtained from the simple linear regression analysis, using the values of liquid limit, initial void ratio and natural water content as independent variables, were compared with the existing empirical equations. Multiple linear regression was also performed to find the best fit regression curves for compression index and other soil properties by combining those independent variables. On the other hands, another software of SPSS for non-linear regression was used to analyze the correlations between compression index and other soil properties.

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.112-113
• /
• 1999

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.635-641
• /
• 2012

In Korea, slurry composted and biofiltered (SCB) liquid fertilizer is produced through the composting and biofiltering of animal waste. An appropriate guidelines involving proper treatment of SCB liquid fertilizer on turfgrass should be considered. An experiment was conducted to determine the optimum application amount, timing, and frequency of SCB liquid fertilizer for Zoysia japonica 'Millock'. The SCB liquid fertilizer was applied in low, medium, and high amount (N at 15, 25, and 40 $g{\cdot}m^{-2}$ per year in 2010, and 10, 20, and 40 $g{\cdot}m^{-2}$ per year in 2011, respectively) and treated during the growing season or dormancy period. During the growing season, SCB liquid fertilizer was applied twice or four times. The greatest improvement in turf quality for both years was in SCB plots applied four times with N at 40 $g{\cdot}m^{-2}$ per year during the growing season (SH4). This treatment exhibited turf color retention in the fall, and enhanced clipping yield during the growing and fall seasons. SCB plots with four times during the growing season (SL4, SM4, and SH4) exhibited higher shoot density relative to the same amount of other SCB treatments. Plots treated during the dormancy period also showed a high turf color index during the next growing season in 2011. The results indicate that SCB with high amount up to N at 40 $g{\cdot}m^{-2}$ per year applied four times during the growing season and dormant application produced high turf quality and growth, and could be recommended as an optimum application guide.