• Journal of Information Display
• /
• 제12권2호
• /
• pp.101-107
• /
• 2011

To come up with a bistable liquid crystal (LC) device using unpolarized UV light, single-step laser patterning on a photoalignment layer using a photomask was proposed to achieve an equilibrium configuration of LC molecules in contact with a periodically patterned substrate. The patterns were formed by stripes of alternating random planar and homeotropic anchoring on a submicrometer scale in the order of $0.5{\mu}m$. Two possible configurations of bistable LC cells that can be obtained by combining a micropatterned surface formed with alternating random-planar- and homeotropic-alignment with planar- or homeotropic-alignment surfaces were proposed. The alignment properties of the two proposed models were investigated, along with the microscopic switching behavior of micropatterned nematic LC cells.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.264-268
• /
• 2002

Three types of polymer, a photoalignment material based N- (phenol)maleimide were synthesized and the liquid crystal (LC) aligning capabilities on the photopolymer layer were studied. A good LC alignment with UV exposure on the PMI5CA(N-(phenol)maleimide with 5-carbon chain cinnamoyl group) can be obtained. However, the LC alignment defects were observed on the PM13CA (N-(phenol)maleimide with 3-carbon chain cinnamoyl group) and PMIF (N-(phenyl)maleimide including fluoro cinnamoyl group). Also, the good LC alignment with UV exposure on the PM15CA surface was observed at until $150^{\circ}C$ of annealing temperature. The LC aligning ability on the photopolymer layer based N-(phenol)maleimide depends on the side chain length of photopolymer.

• Journal of Information Display
• /
• 제7권2호
• /
• pp.12-15
• /
• 2006

We propose a patterning method of liquid crystal (LC) alignment layer for producing multi-domain LC structures. By controlling thermal conditions during micro-contact printing procedures and facilitating wetting properties of patterning materials, patterned LC orientation can be easily obtained on a bare ITO surface or other polymer films. The newly proposed patterning method is expected to be a very useful tool for fabricating multi-domain LC structures to enhance or design electro-optic properties of LC-based devices.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.109-112
• /
• 2016

We demonstrated an alternative electrically controlled birefringence liquid crystal (ECB-LC) system with ion beam (IB)-irradiated yttrium gallium oxide (YGaO) alignment films using a sol-gel process. The surface roughness of the films was dependent on the annealing temperature; aggregated particles on surface were observed at lower annealing temperatures, whereas a smooth surface could be obtained with higher annealing temperatures. Higher transmittance in the visible region was observed at higher annealing temperatures. The film had an amorphous crystallographic state irrespective of the annealing temperature. Furthermore, ECB-LC cell with our IB-irradiated YGaO film yielded faster response time when compared to ECB-LC cell with rubbed polyimide. Considering the fast response time and high transmittance, the IB-irradiated YGaO-base LC system is a powerful alternative application for the liquid crystal display industry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.299-302
• /
• 2007

We propose a soft-lithographic patterning method for producing a multi-domain liquid crystal (LC) alignment. The LC alignment polyimide layers are periodically patterned in the pixel boundaries by a micromolding-in-capillaries method. In our structure, the initially homeotropic LC orientations in the pixel areas are changed to axially symmetric LC domains due to the symmetric pretilt of LC molecules on the pixel boundaries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.611-614
• /
• 2003

We have investigated electric field effect on the formation of phase separated composite organic film structure which is utilized by anisotropic phase separation from LC and prepolymer mixtures. Application of bias field resulted in a significant change in liquid crystal alignment between glass substrate and polymer layer. The liquid crystal molecules segregated into the inter-electrodes and formed twisted structure which is the result of imprinting of LC alignment by the bias field on polymer layers during polymerization process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.449-450
• /
• 2005

Alignment characteristic of liquid crystal (LC) on in-cell retarder which is composed of reactive mesogens has been tested. The in-cell retarder which is polymerized on top of the homogeneous alignment layer (AL) has an optic axis along the rubbing direction of the homeogenous AL and does show good alignment effect of the LC without showing any defects, which possibly allows a skip of another AL on the in-cell retarder that was required conventionally to control alignment of the LC. However, the measured pretilt angle is only 0.04 degree so that disclination lines are generated for a cell that uses the in-cell retarder as an AL when the LC is tilted upward by a vertical electric field.

• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.321-326
• /
• 2021

We fabricated BiAlO thin film by a solution process with a brush coating to be used as liquid crystal (LC) alignment layer. Solution-processed BiAlO was coated on the glass substrate by brush process. Prepared thin films were annealed at different temperatures of 80℃, 180℃, and 280℃. To verify whether the BiAlO film was formed properly, X-ray photoelectron spectroscopy analysis was performed on Bi and Al. Using a crystal rotation method by polarized optical microscopy, LC alignment state was evaluated. At the annealing temperature of 280℃, the uniform homogenous LC alignment was achieved. To reveal the mechanism of LC alignment by brush coating, field emission scanning electron microscope was used. Through this analysis, spin-coated and brush coated film surface were compared. It was revealed that physical anisotropy was induced by brush coating at a high annealing temperature. Particles were aligned in one direction along which brush coating was made, resulting in a physical anisotropy that affects a uniform LC alignment. Therefore, it was confirmed that brush coating combined with BiAlO thin film annealed at high temperature has a significant potential for LC alignment.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.461-466
• /
• 1997

In this paper, we developed the new non-rubbing liquid crystal (LC) alignment techniques in the cell with slanted non-polarized ultraviolet (UV) light irradiation on polyimide (PI) film. It is shown that the uniform alignment for nematic (N) LC is obtained by using slanted non-polarized UV light irradiation on PI surface. We successfully obtained that the pretilt angle of NLC is generated about 3.3 degree in the cell with slanted non-polarized UV light irradiation with 70 degree on PI surface, for the first time. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecular and the PI, which is broken the polymer by slanted non-polarized UV irradiation. Therefore, we concluded that the uniform LC alignment is attributed to anisotropic dispersion force due to photo depolymerization with slanted non-polarized UV light irradiation on PI surface.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.58-65
• /
• 2022

The field of liquid crystal display (LCD) is constantly in the spotlight and the process of depositing an alignment layer in the LCD manufacturing process is very important to obtain excellent performance such as low-power driving and high-speed response to improve LCD performance. Therefore, research on liquid crystal (LC) alignment is being actively conducted. When manufacturing LCD, it is necessary to consider the effect of the alignment layer thickness as one of the factors affecting various LCD performances. In addition, previous studies confirmed the LC alignment characteristics correlate with the rotation speed in the spin coating process. Therefore, the electro-optical properties of the LCD were investigated by manufacturing a polyimide alignment layer by varying the rotation speed in the spin coating process in this study. It was confirmed that the thickness of the polyimide alignment layer was controlled according to the spin coating conditions. The average transmittances of anti-parallel LC cells at the spin coating speed of 2,500 rpm and 3,000 rpm are about 60%, which indicates that the LC cell has relatively higher performance. At the spin coating speed of 3,000 rpm, the voltage-transmittance curve of twisted nematic (TN) LC cell was below 1.5 V, which means that the TN LC cell operated at a low power. In addition, high-speed operating characteristics were confirmed with a response time of less than 30 ms. From these derived data, we confirmed that the ideal spin coating speed is 3,000 rpm. And these results provide an optimized polyimide alignment layer process when considering enhanced future LCD manufacturing.