• 열처리공학회지
• /
• 제9권1호
• /
• pp.19-26
• /
• 1996

Melt-quenching of steels leads to various metallographic effects such as refinement of grain size, extension of the solid solubility of carbon and alloying elements, and is expected to improve the mechanical properties of conventional steels. Furthermore, this technique is a useful method for producing sheet directly from liquid state. And it will lend itself to development as a continuous cast process which offers significant savings in energy and product costs. The purpose of this study is to present the microstructures of melt-quenched austenitic stainless steels. As the results of this study, the morphology of melt-quenched microstructure show that the roll contact area is columnar structure, and the free surface area is dendrite structure. As the line speed increases, the ratio of $d_{colunnar}/d_{total}$ increases from 0.12 to 0.60, but the ribbon thickness decreases from $150{\mu}m$ to $30{\mu}m$.

• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.99-105
• /
• 2011

In this study, effect of Si content on nugget diameter in electric resistance spot welded dual-phase(DP) steel was investigated. The cold rolled DP steels with different Si content (0.5, 1.0, 1.5, 2.0 wt.%) were used and thickness of those sheet was 1.2mm. With increasing Si content, nugget diameter was increased at the same welding current. This is attributed to increase of heat input result from high resistivity. Also, nugget diameter was increased with an increase in Si content for the same heat input. For this reason, the melting point of DP steel is lowered with an increase in the Si content. And solid DP steel can easily be transformed to a liquid phase because the low melting point. Finally, a prediction formula for the nugget diameter(N.D.) could be obtained in terms of heat input(Q) and melting point(M.P) as follows: N.D.(mm) = 0.11Q(J) - 0.0031 M.P.($^{\circ}C$) + 0.32.

• 한국전기전자재료학회논문지
• /
• 제16권2호
• /
• pp.151-156
• /
• 2003

High temperature superconductor can only be applied against an engineering specofication that has to be determined for each particular application form the design requirements for economic viability and for operation margins in service. However, in order to realize the HTS transformer, it is necessary to establish the high voltage insulation technique in cryogenic temperature. Therefore, the composite insulation of double pancake coil type transformer are described and AC breakdown voltage characteristics of liquid nitrogen(LN$_2$) under HTS pancake coil electrode made by Bi-2223/Ag are studied. The Breakdown of LN$_2$ is dominated electrode shape and distance. The influence of pressure on breakdown voltage is discussed with th different electrode. For the electrical insulation design of turn-to-turn insulation for the HTS transformer, we tested breakdown strength of insulation sheet under varying pressure. And we investigated surface flashover properties of LN$_2$ and complex conition of cryogenic gaseous nitrogen(CGN$_2$) obove a LN$_2$ surface. The surface voltage of GFRP was measured as a function of thickness and electrode distance in LN$_2$ and complex condition of CGN$_2$ above a LN$_2$ surface. this research presented information of electrical insulation design for double pancake coil(DPC) type HTS transformer.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.84-89
• /
• 2021

Indium tin oxide (ITO) transparent electrodes, which are used to manufacture organic light-emitting diodes, are used in light-emitting surface electrodes of display EL panels such as cell phones and TVs, liquid crystal panels, transparent switches, and plane heating elements. ITO is a major component that consists of indium and tin and is advantageous in terms of obtaining sheet resistance and light transmittance in a thin film. However, the optical performance of devices decreases with an increase in its thickness. A digital holography system was constructed and measured for the step measurement of the ITO thin film, and the reliability of the technique was verified by comparing the FE-SEM measurement results. The error rate of the step difference measurement was within ±5%. This result demonstrated that this technique is useful for applications in advanced MEMS and NEMS industrial fields.

• 유기물자원화
• /
• 제8권4호
• /
• pp.93-99
• /
• 2000

본 연구는 피혁 제조 공정시 다량의 폐수 및 폐기물의 발생으로 피혁산업 전반에 걸쳐 심각한 폐기 처리 비용의 부담으로 인하여 생산비용의 상승 요인으로 작용하고 있는 문제점을 다소 해소하고자 실험을 실시하였다 피혁폐기물 가운데 가장 발생량이 많은 세빙조각(Shaving scrap)은 매립 또는 해양투기시 크롬을 함유하고 있어 환경오염에 심각한 영향을 줌으로 이에 관한 연구가 피혁선진국인 이태리를 중심으로 활발하게 진행중에 있다. 특히 세빙조각은 크롬 유제공정(Chrome tanning process)후 피혁원단의 두께 조절을 위하여 불가피하게 발생되는 고형폐기물로서 전체 80%이상 콜라겐섬유 단백질로 구성되어 있어 섬유상 특성을 유지하고 있다. 본 실험의 주요 내용은 섬유업계에서 폐기 또는 재생용으로 활용되고 있는 고분자성 단섬유와 피혁폐기물인 세빙조각을 혼합, 분쇄 처리한 다음 각종 바인더를 균일하게 배합, 숙성한 상태에서 실험용 Fourdriner방식의 기계에 투입하여 균일한 습식의 부직포 구조물(Wet web structure)을 제조하였다. 습식의 Sheet상을 탈수, 건조한 다음 일정한 압력으로 압착하여 Leather-like material을 제조하였으며 인장 및 인열강도등 우수한 물리적인 특성을 지닌 다양한 종류의 피혁 대체 소재용 재활용품을 제조하여 국내 피혁업계의 피혁 재활용 분야의 응용 연구에 보탬이 되고자 시도하였다.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.492-498
• /
• 2021

본 논문에서는 액체 소금물을 전도체로써 이용한 평면형 투명 안테나의 구현 가능성을 연구 하였다. 소금물을 이용한 투명 안테나 구현의 가장 큰 이유는 기존 고체 투명전극의 광투과도 indium tin oxide (ITO:> 73%) 또는 multi-layer films (MLF: > 78%) 대비 높은 소금물의 광투과도 (> 95% @ 40 ppt)에 있다. 제안된 다이폴안테나의 양쪽 팔의 소금물 층을 평면형으로 고정하기 위해 투명 아크릴(��r = 2.61, tan�� = 0.01, OTav > 90 %)을 사용하였으며, 소금물의 표면장력을 이용하여 (ASA: 아크릴/소금물/아크릴) 형태의 평면형 ASA층으로 구현 하였다. 전기적, 광학적으로 ASA 전도체 구조를 분석하기 위해, 표면장력을 통한 평면형 구조 유지 시, 소금물 두께에 따른 면저항과 광투과도를 분석 하였다. 소금물을 이용한 투명 평면형 다이폴 안테나는 UHF(Ultra high frequency) 대역(470-771 MHz)에서 1.72 dBi의 평균 방사이득 및 74 %의 방사효율을 가지며, 향후 소금물을 이용한 평면형 투명안테나로써의 활용 가능성을 확인 하였다.