• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.3645-3651
• /
• 2012

Conventional pap smear (CPS) examination has been the mainstay for early detection of cervical cancer. However, its widespread use has not been possible due to the inherent limitations, like presence of obscuring blood and inflammation, reducing its sensitivity considerably. Automated methods in use in developed countries may not be affordable in the developing countries due to paucity of resources. On the other hand, manual liquid based cytology (MLBC) is a technique that is cost effective and improves detection of precursor lesions and specimen adequacy. Therefore the aim of the study was to compare the utility of MLBC with that of CPS in cervical cancer screening. A prospective study of 100 cases through MLBC and CPS was conducted from October 2009 to July 2010, in a Medical College in India, by two independent pathologists and correlated with histopathology (22 cases). Morphological features as seen through MLBC and CPS were compared. Subsequently, all the cases were grouped based on cytological diagnosis according to two methods into 10 groups and a subjective comparison was made. In order to compare the validity of MLBC with CPS in case of major diagnoses, sensitivity and specificity of the two methods were estimated considering histological examination as the gold standard. Increased detection rate with MLBC was 150%. The concordance rate by LBC/histopathology v/s CPS/histopathology was also improved (86% vs 77%) The percentage agreement by the two methods was 68%. MLBC was more sensitive in diagnosis of LSIL and more specific in the diagnosis of inflammation. Thus, MLBC was found to be better than CPS in diagnosis of precursor lesions. It provided better morphology with increased detection of abnormalities and preservation of specimen for cell block and ancillary studies like immunocytochemistry and HPV detection. Therefore, it can be used as alternative strategy for cervical cancer prevention in limited resource settings.

• Journal of information and communication convergence engineering
• /
• 제1권3호
• /
• pp.133-138
• /
• 2003

The preparation of $Al_{2}O_{3}-SiO_{2}$ thin films from less than one micron to several tens of microns in thickness had been prepared from metal alkoxide sols. Two methods, dip-withdrawal and electrophoretic deposition, were employed for thin films and sheets formation. The requirements to be satisfied by the solution for preparing uniform and strong films and by the factors affecting thickness and other properties of the films were examined. For the preparation of thin, continuous $Al_{2}O_{3}-SiO_{2}$ films, therefore, metal-organic-derived precursor solutions contained Si and Al in a chemically polymerized form has been developed and produced in a clear liquid state. In the process of applying to substrates, this liquid left a transparent, continuous film that could be converted to crystalline $Al_{2}O_{3}-SiO_{2}$ upon heating to $1000^{\circ}C$. And, a significant change of the film density took place in the crystallization process, thus leading to the strict requirements as to the film thickness, which could survive crystallization.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.33-36
• /
• 2013

A bulk metallic glass-forming alloy, $Ni_{59}Zr_{20}Ti_{16}Si_2Sn_3$ metallic glass powders was used for good commercial availability and good formability in supercooled liquid region. In this study, the Ni-based metallic glass was synthesized using by high pressure gas atomized metallic glass powders. In order to create a bulk metallic glass sample, the $Ni_{59}Zr_{20}Ti_{16}Si_2Sn_3$ metallic glass powders with ball-milled Ni-based amorphous powder with 40%vol brass powder and Cu powder for 20 hours. The composite specimens were prepared by Spark Plasma Sintering for the precursor. The SPS was performed at supercooled liquid region of Ni-based metallic glass. The amorphous structure of the final sample was characterized by SEM, X-ray diffraction and DSC analysis.

• 한국세라믹학회지
• /
• 제49권1호
• /
• pp.95-99
• /
• 2012

Silicon carbide ceramics are used for oxidation resistive coating films due to their excellent properties like high strength, good oxidation resistance, and good abrasion resistance, but they have poor formability and are prepared by vapor process which is complicated, costly, and sometimes hazardous. In this study, preparation of silicon carbide coating film by liquid process using polymer precursor was attempted. Coating film was prepared by dip coating on substrate followed by heat treatment in argon at $1200^{\circ}C$. By changing the dipping speed, the thickness was controlled. The effects of plasticizer, binder, or fiber addition on suppression of crack generation in the polymer and ceramic films were examined. It was found that fiber additives was effective for suppressing crack generation.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.380-386
• /
• 2008

Optimized volume production of nanoscale phosphor powders synthesized by radio frequency (RF) plasma process was developed for the application to plasma display panels. The nano powders were synthesized by feeding the both solid and liquid type precursors, and nanoparticle phosphors were characterized in terms of particle size, shape, and photoluminescence (PL) intensities. Computer simulation was performed in advance to determine the process parameters, and nano phosphors were evaluated by comparing with current commercial micron-sized phosphor powders. Practical feeding of both solid and liquid type precursor was proved to be effective for volume production.The developed process showed a potential as a production method for red, blue and green phosphor although the PL intensity still needs further improvement.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.957-962
• /
• 2003

The preparation of $Al_2$O$_3$-SiO$_2$ thin films from less than one micron to several tens of microns in thickness had been prepared from metal alkoxide sols. Two methods, dip-withdrawal and electrophoretic deposition, were employed for thin films and sheets formation. The requirements to be satisfied by the solution for preparing uniform and strong films and by the factors affecting thickness and other properties of the films were examined. for the preparation of thin, continuous $Al_2$O$_3$-SiO$_2$ films, therefore, metal-organic-derived precursor solutions contained Si and Al in a chemically polymerized form has been developed and produced in a clear liquid state. In the process of applying to substrates, this liquid left a transparent, continuous film that could be converted to crystalline $Al_2$O$_3$-SiO$_2$ upon heating to 100$0^{\circ}C$. And, a significant change of the film density took place in the crystallization process, thus leading to the strict requirements as to the film thickness, which could survive crystallization.

• 한국축산식품학회지
• /
• 제34권6호
• /
• pp.749-756
• /
• 2014

A rapid and simple analytical method for L-carnitine was developed for infant and toddler formulas by liquid chromatography tandem mass spectrometry (LC-MS/MS). A 0.3 g of infant formula and toddler formula sample was mixed in a 50 mL conical tube with 9 mL water and 1 mL 0.1 M hydrochloric acid (HCl) to chemical extraction. Then, chloroform was used for removing a lipid fraction. After centrifuged, L-carnitine was separated and quantified using LC-MS/MS with electrospray ionization (ESI) mode. The precursor ion for L-carnitine was m/z 162, and product ions were m/z 103 (quantitative) and m/z 85 (qualitative), respectively. The results for spiked recovery test were in the range of 93.18-95.64% and the result for certified reference material (SRM 1849a) was within the range of the certificated values. This method could be implemented in many laboratories that require time and labor saving.

• 한국분말재료학회지
• /
• 제19권1호
• /
• pp.60-66
• /
• 2012

In this study, Platinum(Pt) nanoparticles were synthesized by using polyol process which is one of the liquid phase reduction methods. Dihydrogen hexachloroplatinate (IV) hexahydrate $(H_2PtCl_6{\cdot}6H_2O)$, as a precursor, was dissolved in ethylene glycol and silver nitrate ($AgNO_3$) was added as metal salt for shape control of Pt particle. Also, polyvinylpyrrolidone (PVP), as capping agent, was added to reduce the size of particle and to separate the particles. The size of Pt nanoparticles was evaluated particle size analyzer (PSA). The size and morphology of Pt nanoparticles were observed by transmission electron microscopy (TEM) and high resolution TEM (HRTEM). Synthesized Pt nanoparticles were studied with varying time and temperature of polyol process. Pt nanoparticles have been successfully synthesized with controlled sizes in the range 5-10 and 20-40 nm with cube and multiple-cube shapes.

• Advances in nano research
• /
• 제14권1호
• /
• pp.103-115
• /
• 2023

Recent developments in the synthesis of nanomagnesia of controlled sizes and shapes that are suitable for various applications are reviewed. Two main methods, based on liquid-phase synthesis, i.e., chemical methods and bio-based methods, are used to synthesize nanomagnesia. Conventionally, nanomagnesia was synthesized by chemical methods such as coprecipitation, sol-gel, combustion method, and so on using different chemical agents and stabilizers which later on become responsible for several biological risks because of the toxicity of used chemicals. Bio-based protocols are growing as another environmental friend method for the synthesis of various nanostructures especially nanomagnesia using biomass, plant extracts, alga, and fungi as a source of precursor material. The ideal method should offer better control of textural properties of nanostructures and decrease the necessity for purification of the synthesized nanoproducts, which sequentially removes the use of large amounts of chemicals and organic solvents and manipulation of products that are unsafe to the environment. Finally, the broad applicability of nanomagnesia in diverse areas is presented. Employment of nanomagnesia reported in several laboratory and industrial fields are valued from the standpoint of the significance of these issues for technological requests, as described in the literature. Nanomagnesia has various applications such as antimicrobial performance, removing pollutants, batteries application, and catalysis.

• Carbon letters
• /
• 제17권1호
• /
• pp.53-64
• /
• 2016

Nitrogen (N)-doped ordered mesoporous carbons (OMCs) with a dual transition metal system were synthesized as non-Pt catalysts for the ORR. The highly nitrogen doped OMCs were prepared by the precursor of ionic liquid (3-methyl-1-butylpyridine dicyanamide) for N/C species and a mesoporous silica template for the physical structure. Mostly, N-doped carbons are promoted by a single transition metal to improve catalytic activity for ORR in PEMFCs. In this study, our N-doped mesoporous carbons were promoted by the dual transition metals of iron and cobalt (Fe, Co), which were incorporated into the N-doped carbons lattice by subsequently heat treatments. All the prepared carbons were characterized by via transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). To evaluate the activities of synthesized doped carbons, linear sweep was recorded in an acidic solution to compare the ORR catalytic activities values for the use in the PEMFC system. The dual transition metal promotion improved the ORR activity compared with the single transition metal promotion, due to the increase in the quaternary nitrogen species from the structural change by the dual metals. The effect of different ratio of the dual metals into the N doped carbon were examined to evaluate the activities of the oxygen reduction reaction.