• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.183-195
• /
• 2014

Kinetically constrained models (KCM) have attracted interest as models that assign dynamic origins to the interesting dynamic properties of supercooled liquid. Signs of dynamic heterogeneity in the crossover model that linearly interpolates between the FA-like symmetric constraint and the East model constraint by asymmetric parameter b were investigated using Monte Carlo technique. When the asymmetry parameter was decreased sufficiently, smooth fragile-to-strong dynamic transition was observed in terms of the relaxation time, diffusion constant, Stokes-Einstein violation, and dynamic length scale. Competition between energetically favored symmetric relaxation mechanism and entropically favored asymmetric relaxation mechanism is behind such transition.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.1-8
• /
• 2004

Breakup characteristics of liquid sheets formed by the impingement of two water jets, such as a breakup length and a breakup wavelength of sheet, were investigated as increasing the injection velocity up to 30m/s and the ambient gas pressure up to 4.0MPa. While round edged orifices formed a laminar sheet which has no waves on the sheet when the injection velocity is low, sharp edged orifices formed a turbulent sheet which has impact waves irrespective of the injection velocity. Thus we compared the differences of breakup characteristics between them. The results showed that the aerodynamic force significantly affects the breakup of laminar sheet when the gas based Weber number is higher than unity, It was also found that the turbulent sheets have three breakup regimes, i.e. expansion regime, wave breakup regime and catastrophic breakup regime according to the gas based Weber number.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.178-181
• /
• 2003

Intermediate cooling for current lead is used of thermal link in conduction cooling and cooled of itself in liquid cooling because it is put in liquid. If a existing formula for cooling load and optimal diameter-length of current lead is applied, it generate some more cooling load. Therefore, variation of thermal link height and holding depth in liquid is considered. This result is used of reducing cooling load of current lead occupying most of superconducting system load and applying liquid/conduction cooling systems.

• 한국분무공학회지
• /
• 제19권4호
• /
• pp.188-196
• /
• 2014

The spray and combustion characteristics of n-dodecane fuel were investigated in a CVCC (constant volume combustion chamber). The selection of ambient conditions for the spray followed ECN (engine combustion network) guidelines, which simulates the ambient condition of diesel engines at start of fuel injection. ECN is a collaboration network whose main objective is to establish an internet library of well-documented experiments that are appropriate for model validation and the advancement of scientific understanding of combustion at conditions specific to engines. Therefore repeatability of the experiments with high accuracy was important. The ambient temperature was varied from 750 to 930 K while the density was fixed at around $23kg/m^3$. The injection pressure of the fuel was varied from 500 to 1500 bar. The spray was injected in both non-reacting ($O_2$ concentration of 0%) and reacting conditions ($O_2$ concentration of 15%) to examine the spray and the combustion characteristics. Direct imaging with Mie Scattering was used to obtain the liquid penetration length. Shadowgraph was implemented to observe vapor length and lift-off length at non-reacting and reacting conditions, respectively. Pressure data was analyzed to determine the ignition delay with respect to the spray and ambient conditions.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제24권5호
• /
• pp.1-10
• /
• 2019

The effects of liquid phase ozonation on seed dormant alleviation and subsequent seedling growth were studied using two plant seeds of Indian jointvetch (Aeschynomene indica L.) and Indian mallow (Abutilon avicennae Gaertn.). At a constant ozone concentration ($80g/m^3$), contact time varied from 10 to 60 min with 10 min interval. Germination rate, root length, and specific root length were compared after 3-day incubation on gel-medium. The germination rate increased significantly (p<0.05) in the 50 min treatment of Indian mallow by 30% compared to the control. Enhanced root elongation was observed in the seeds of 30 min treatment of Indian jointvetch and 30~50 min treatment of Indian mallow. Specific root length, an indicator of environmental change, did not show significant changes, suggesting the level of ozone treatment has no adverse effect on seedling development. The results indicate that liquid phase seed ozonation can be an effective on-site germination alleviation method in the application of phytoremediation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.35-36
• /
• 1989

A streaming current in liquid generated by flow electrification in a pipe is very hazardous and has to be reduced before the liquid is put into a storage tank, it was measured in pipe (${\Phi}$: 0.5mm, 0.8mm length: 1.5-11cm), it was increased as increasing pressure of Ar gas and appeared a peak value at 5cm of pipe length in 4m/sec of flow velocity.

• 대한음성학회지:말소리
• /
• 제57호
• /
• pp.43-58
• /
• 2006

This study aims to investigate whether Chinese learning Korean and Korean native speakers show any difference in length and formant structures of the Korean liquid 'ㄹ' in the environments of v_v and v_# through the acoustic analysis of 10 Chinese learners' and 10 Koreans' utterances. The acoustic analysis of L2KSC DB shows that the length and formant structures of 'ㄹ' produced by Chinese learners are significantly different from the ones by Koreans. I explain these differences by contrasting the liquids and syllable structure constraints of the two languages, Chinese and Korean. In addition, I relate the F1 and F2's values to the tongue's movement when making a constriction, and conclude that Chinese learners pronounce the 'ㄹ' in the v_# environment with the tongue lower and backer than Koreans do.

• 한국분무공학회지
• /
• 제6권3호
• /
• pp.17-22
• /
• 2001

Recently LPG engine is developed to fulfill such new requirements as improved fuel efficiency in additional to further reduced exhaust emission. This experimental study is conducted to analyze spray characteristics for pintle type injector used in a LPLi (Liquid Phase LPG injection) engine. Since spray parameters including penetration length and spray angle make a role to design injector and engine intake system, spray visualization experiment is performed under atmosphere ambient and charging condition using Mie scattering method. From the experimental result under various LPG formation, the increased propane component decreases penetration length because boiling point of propane is lower than butane. To simulate intake charging condition in MPI engine, spray visualization is performed under high pressure condition. As a result, as ambient pressure is increased from atmosphere to 3.0 bar, penetration length is decreased. However, as ambient pressure is increased from atmosphere to 3.0 bar, spray angle is increased.

• 한국분무공학회지
• /
• 제7권1호
• /
• pp.29-35
• /
• 2002

This study describes the external spray characteristics of deflector nozzle such as the breakup procedures of liquid sheet, spray angle, breakup length and bubble behaviors of spray at deflector nozzle. In order to visualize the spray behaviors shadow graphy technique were used. According to the increase injection pressure, deveopment of the spray passes through the dribbling, distoted jet, closed bubble due to the contraction by form a conical sheet like as the simplex swirl atomizer. As trying the analysis of the ratio of bubble length and width it was found that the ratios is comparable. Spray cone angle was nearly $90^{\circ}$.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.29-33
• /
• 2010

본 연구는 Kerosene-LOx를 추진제로 하는 가스발생기용 스월 동축형 인젝터의 리세스 길이에 따른 내부 유동의 특성 파악을 목표로 하였다. 리세스 길이는 분무 안정성, 내부 LOx post 손상 등에 영향을 미치는 중요한 요소로 액막두께, 매니폴드 압력 측정 및 내부 유동 가시화를 통해 리세스의 영향을 분석하였다. 또한, 리세스 길이에 따른 내부 또는 외부 인젝터 각각의 분무특성도 살펴보았다.