• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2867-2872
• /
• 2012

SAN/$BMIPF_6$ nanofibers were fabricated by an electrospinning process and used as chemiresistors for sensing alcohol vapours. A hydrophobic and air-stable ionic liquid, $BMIPF_6$, was used to impart electrical conductivity to insulating SAN nanofibers. The effects of $BMIPF_6$ addition on the morphology of the nanofibers were explained in terms of surface tension, viscosity and conductivity. After exposing the SAN/$BMIPF_6$ nanofibers collected on an interdigitated electrode to alcohol vapours (ethanol, 1-propanol and 1-butanol), the resistance of the nanofibers decreased due to adsorption of alcohol molecules. The electrospun SAN/$BMIPF_6$ nanofibers sensor exhibited good sensitivity and reproducibility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.194-196
• /
• 2005

A series of inorganic-organic hybrid membranes were prepared with a systematic variation of titanium dioxidenanoparticles content. Their liquid uptake, methanol permeability and proton conductivity as a function of inoranic oxide content were investigated. The results obtained show that the inorganic oxide network decreases the proton conductivity and liquid uptake. It is also found that increase in inorganic oxide content leads to decrease of methanol permeability. In terms of the morphology, membranes are homogeneous and exhibit a good adhesion between inorganic domains and the polymer matrix. The properties of the composite membranes are compared with the standard nafion membrane.

• Composites Research
• /
• 제33권1호
• /
• pp.25-29
• /
• 2020

Diglycidyl ether of 4,4'-biphenol을 기지로 사용하고, tin(IV) oxide를 filler로, sulfanilamide를 경화제로 사용하여 액정성 열경화성 에폭시 기반 복합재료를 제작하였다. TGA와 LFA를 이용하여 3.0-7.0 wt%의 tin(IV) oxide를 분산시켜 제작한 복합재료의 열적 거동을 조사한 결과, 열분해 활성화 에너지와 열전도성이 filler의 첨가량에 비례하는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.419-423
• /
• 2015

Sintering, microstructure, thermal conductivity and microwave dielectric properties of xLiF-(1-x)MgO ceramics (x=0.03~0.10 mol) were investigated. The high density was obtained in the specimens of $x{\geq}0.06$, i.e., 0.04 LiF-0.96 MgO in mol, whereas the amount of 0.03 mol LiF was insufficient to densify. From the result that the contact flattening in the sintered specimen was observed, the densification occurred through the liquid-phase sintering. The specimen of x=0.06 showed the highest room-temperature thermal conductivity. Relative density, thermal conductivity, dielectric constant, and quality factor ($Q{\times}f$) of the specimen for x=0.06 sintered at $900^{\circ}C$ for 4 h were 97.8%, $39.2Wm^{-1}K^{-1}$, 9.45, and 14,671 GHz, respectively.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.208-211
• /
• 2001

Geosynthetic Clay Liners (GCLs) have been used for the applications of the hydraulic containment system in landfill due to inexpensive costs, simple workability and distinguished ability as a barrier material. However, bentonite of GCLs is easy to be damaged by the chemical solutions. Thus, there is a need to evaluate the potential susceptibility of GCLs causing Increase the hydraulic conductivity when GCLs are exposed to raw leachate and dissolved humic substances from landfill leachate. The hydraulic conductivity tests were performed with flexible-wall permeameter (the falling -headwater/rising -tailwater procedure) in order to verify the potential susceptibility of GCLs. The values of the hydraulic conductivity conducted with raw leachate as a permeant liquid increased considerably; however, The change of the hydraulic conductivity in the case of humic and fulvic acid were not worthy of notice. As the results of swelling tests of bentonite, however, humic substances can affect badly on the dispersion behavior of bentonite. These results indicate that humic substances dissolved in leachate could reduce the hydraulic conductivity of GCLs in landfill.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.163-165
• /
• 2009

It is commonly found that liquid crystals stored in a common environment degrade with time, trapping more and more ion impurity in the materials. In this paper, we demonstrate how the electrical property of an old batch of liquid crystal can be effectively restored by a novel regenerative agent.

• 한국주조공학회지
• /
• 제33권1호
• /
• pp.22-31
• /
• 2013

In order to develop an aluminum alloy, that can combine high thermal conductivity and good castability and anodizability, aluminum alloys with low Si content, such as Al-(0.5~1.5)Mg-1Fe-0.5Si and Al-(1.0~1.5)Si-1Fe-1Zn, were designed. The developed aluminum alloys exhibited 170~190% thermal conductivity (160~180 W/mK), 60~85% fluidity, and equal or higher ultimate tensile strength compared with those of the ADC12 alloy. In each developed alloy system, the thermal conductivity decreased and the strength increased with the increment of Mg and Si, which are the significant alloying elements. The fluidity was in reverse proportion to the Mg content and in proportion to the Si content. The Al-(0.5~1.5)Mg-1Fe-0.5Si alloys exhibited better fluidity in thick-wall castings, while the Al-(1.0~1.5)Si-1Fe-1Zn alloys were better in thin-wall castability due to their lower surface energies. The fluidity behavior was complexly affected by the heat release for the solidification, viscosity, solidification range, and the type, quantity, and formation juncture of the main secondary phase.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.856-862
• /
• 2009

This study examined the effects of liquid and solid additives on the morphological, mechanical and thermal insulating properties of rigid polyurethane foams (PUFs). The PUFs synthesized with tetramethylsilane (TEMS) as a liquid-type additive showed a smaller average cell size and lower thermal conductivity than those with the aerosil 200 and clay 30B as solid-type additives. When TEMS was added, the average cell size of the PUF became more uniform and finer due to the reduced surface tension of the polymer solution, which increased the nucleation rate and number of bubbles produced and reduced cell size. The PUFs with TEMS showed the highest closed cell contents among the PUFs prepared using TEMS, aerosil 200 and clay 30B. This suggests that the insulation properties of PUF can be determined by both the size of the cell structure and the amount of closed cell contents in the system. The compression and flexural strengths of the PUF increased slightly when the aerosil 200, clay 30B and TEMS were added compared those of the neat PUF. The reaction profiles of the PUFs showed a similar gel and tack tree time with the reaction time among the PUFs synthesized with three different additives and neat PUF. This suggests that the nucleating additives used in this study do not affect the bubble growth of the chemical reaction, and the additives may act as nucleating agents during the formation of PUF. From the above results of the cell size, thermal conductivity, closed cell contents and reaction profile of the PUFs, liquid-type nucleating agent, such as TEMS, is more effective in decreasing the thermal conductivity of the PUF than solid-type nucleating agent, such as aerosil 200 and clay 30B.

• Composites Research
• /
• 제35권2호
• /
• pp.53-60
• /
• 2022

본 연구에서 액정성 에폭시인 Diglycidyl ether of terephthalylidene-bis-(4-amino-3-methylphenol) (DGETAM)을 사용해 경화제로는 아민계 경화제인 4,4'-diaminodiphenylethane (DDE)와 양이온 개시제인 N-benzylpyrazinium hexafluoroantimonate (BPH)를 사용하여 필름의 형태로 샘플을 제작하였다. 합성의 확인을 위하여 ¹H-NMR과 FT-IR을 사용하였고, DSC와 POM을 이용하여 DGETAM의 액정성을 확인하고, LFA를 사용하여 샘플의 열전도도를 측정하였다. 활성화 에너지는 TGA를 사용하여 등온 열분해를 진행해 측정한 데이터를 토대로 Arrhenius 식을 사용하여 구하였다. 에폭시 필름의 열전도도를 측정한 결과 DDE를 사용하였을 때, 더 높은 열전도도를 나타내었고, 5% 분해시 BPH를 사용한 필름과 유사한 활성화 에너지를 나타내는 것으로 보아, 열전도도가 열적 안정성에 영향을 미치는 것을 확인할 수 있었다.

• 전기화학회지
• /
• 제8권4호
• /
• pp.177-180
• /
• 2005

유 무기 혼성 막의 계열은 티타니움 디옥사이드 나노파티클 함량의 체계적인 변화에 의해 조제된다. 유 무기 혼성 막의 수분함량, 메탄올 투과도와 전자 전도 특성은 무기 산화물의 함량의 기능에 따라 연구된다. 그 결과 망상구조의 무기 산화물은 전자 전도 특성과 수분함량의 감소를 보였다. 또한 무기 산화물의 함량이 증가할수록 메탄올 투과도도 감소함을 나타내었다. 형태학적인 관점에서 막은 폴리머 기반과 무기영역 사이에 균일하고 잘 점착됨을 보여준다. 혼성막의 특성은 나피온막과 비교 실험되었다.