• 제목/요약/키워드: Liquefaction evaluation

검색결과 133건 처리시간 0.024초

부두 내 중력식 구조물 내진 보강을 위한 공법의 적정성 연구 (EA Study on Seismic Resistant Method for Gravity Structure in Port)

  • 나석현;이동혁
    • 한국지반환경공학회 논문집
    • /
    • 제23권11호
    • /
    • pp.13-18
    • /
    • 2022
  • 본 연구는 항만 중력식 구조물에 대한 내진보강을 분석하여, 그라우팅공법 적용의 적정성을 평가하고자 한다. 평가항목은 액상화, 활동, 전도 및 원호활동 등으로 공법의 적정성을 비교하기 위하여 그라우팅공법인 저유동성 모르타르 주입공법과 말뚝벽체식 보강공법인 SPC 파일 및 GRB 공법을 각각 평가하여 비교하였으며, 평가대상은 포항 구항 중력식 구조물로 선정하였다. 평가결과, 그라우팅공법과 말뚝벽체식 보강공법 모두 평가항목에 대하여 안정성을 충분히 확보하는 것으로 검토되었다. 따라서 중력식 항만 구조물의 경우 시공성, 경제성 및 유지관리 부분과 유사 시공사례 등을 고려 시 내진보강 공법으로 그라우팅공법이 보다 효율적임을 알 수 있었다.

기존 방조제의 내진성능평가 방법 검증 (Verification of the Seismic Performance Evaluation Methods for Enclosure Dam)

  • 김광준;김현국;김성렬;이진선
    • 한국지반공학회논문집
    • /
    • 제38권5호
    • /
    • pp.19-33
    • /
    • 2022
  • 지진시 성토사면의 잔류변위 예측에 가장 많이 사용되는 방법은 Newmark변위법이다. Newmark변위법은 지진시 강체원호의 관성력에 의한 미끌어짐량을 산정하는 방법으로 한계상태평형이론에 근거하여 산정된다. 따라서, 원호의 미끌어짐이 발생하지 않는 항복가속도 이하의 지진이 발생하는 경우 잔류변위가 발생하지 않는다고 가정한다. Newmark 변위법은 최초 제안 이후 지진응답해석기법의 결과를 도입하는 방향으로 개선되었다. 본 논문에서는 방조제 예제 단면에 대해서 Newmark변위법의 적용방법과 비선형응답이력 해석을 통한 내진성능평가 결과의 차이를 살펴보았다. 검토 결과, 설계안전율이 큰 방조제 제체에서는 Newmark변위법에 의한 잔류변위는 거의 발생하지 않았다. 반면, 비선형 응답이력해석의 결과는 비교적 유의미한 잔류변위를 나타냄을 알 수 있었다.

과잉간극수압 발생을 고려한 중력식 안벽구조물의 동적해석 (Dynamic Analysis of Gravity Quay Wall Considering Development of Excess Pore Pressure in Backfill Soil)

  • 유무성;황재익;김성렬
    • 한국해양공학회지
    • /
    • 제24권5호
    • /
    • pp.39-47
    • /
    • 2010
  • In this paper, a total stress analysis method for gravity quay walls is suggested. The method can evaluate the displacement of the quay walls considering the effect of excess pore pressure developed in backfill soils. This method changes the stiffness of backfill soils according to the expected magnitude of the excess pore pressure. For practical application, evaluation methods are suggested for determining the excess pore pressure ratio developed in the backfill soils and the backfill stiffness that corresponds to the excess pore pressure ratio. This method is important in practical applications because the displacement of the quay walls can be evaluated by using only the basic input properties in the total stress analysis. The applicability of the suggested method was verified by comparing the results of the analysis with the results of 1-g shaking table tests. From the comparison, it was found that the calculated displacements from the suggested method showed good agreement with the measured displacements of the quay walls. It was also found that the excess pore pressure in backfill soils is a governing influence on the dynamic behavior of quay walls.

Floating LNG 기반기술에 관한 설계개선 연구 (철회된 논문입니다.) (Research of Design Improvement regarding Foundation Technologies for Floating LNG)

  • 이동현;하문근;김수영;신성철
    • 대한조선학회논문집
    • /
    • 제51권3호
    • /
    • pp.220-230
    • /
    • 2014
  • Typical technical issues associated with Floating LNG (FLNG: FSRU and LNG FPSO) design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this paper, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU) will be reviewed together with their investigated solution. At the same time, research of design improvement including new LNG-related technologies such as combined containment system will be presented to overcome the unrevealed challenges for the FLNG development.

Ortho-para 수소변화장치의 설계 및 성능평가 (Design and performance evaluation of ortho-para H2 conversion equipment)

  • 백종훈;강병하
    • 한국수소및신에너지학회논문집
    • /
    • 제9권3호
    • /
    • pp.93-100
    • /
    • 1998
  • The ortho-para $H_2$ catalytic conversion equipment has been developed to reduce the evaporation loss from stored liquid hydrogen. The ortho-para $H_2$ conversion heat is evaluated at liquid nitrogen temperature. This problem is of particular interest in the design of the ortho-para $H_2$ converter in a hydrogen liquefaction system. The ortho-para $H_2$ conversion equipment consists of a catalytic converter, a precooler, and a liquid nitrogen bath. 30-90 cc of $Fe(OH)_3$ are employed as a catalyst in the present converter. The conversion heat and conversion effectiveness are evaluated when mass flow rate of hydrogen is in the range of 0.05-l.6 g/min. It is found that the ortho-para conversion heat is increased while conversion effectiveness is decreased as the mass flow rate of hydrogen is increased. Both the ortho-para conversion heat and conversion effectiveness are increased with an increase in the amount of the catalyst.

  • PDF

Prediction of maximum shear modulus (Gmax) of granular soil using empirical, neural network and adaptive neuro fuzzy inference system models

  • Hajian, Alireza;Bayat, Meysam
    • Geomechanics and Engineering
    • /
    • 제31권3호
    • /
    • pp.291-304
    • /
    • 2022
  • Maximum shear modulus (Gmax or G0) is an important soil property useful for many engineering applications, such as the analysis of soil-structure interactions, soil stability, liquefaction evaluation, ground deformation and performance of seismic design. In the current study, bender element (BE) tests are used to evaluate the effect of the void ratio, effective confining pressure, grading characteristics (D50, Cu and Cc), anisotropic consolidation and initial fabric anisotropy produced during specimen preparation on the Gmax of sand-gravel mixtures. Based on the tests results, an empirical equation is proposed to predict Gmax in granular soils, evaluated by the experimental data. The artificial neural network (ANN) and Adaptive Neuro Fuzzy Inference System (ANFIS) models were also applied. Coefficient of determination (R2) and Root Mean Square Error (RMSE) between predicted and measured values of Gmax were calculated for the empirical equation, ANN and ANFIS. The results indicate that all methods accuracy is high; however, ANFIS achieves the highest accuracy amongst the presented methods.

액화 공기 에너지 저장 기술(LAES)의 경제성 분석 (Economic Evaluation of Liquid Air Energy Storage (LAES) System)

  • 고아름;박성호;류주열;박종포
    • 신재생에너지
    • /
    • 제16권1호
    • /
    • pp.1-14
    • /
    • 2020
  • Liquid air energy storage (LAES) using gas liquefaction has attracted considerable attention because of its mature technology, high energy density, few geographical constraints, and long life span. On the other hand, LAES has not yet been commercialized and is being developed recently. Therefore, few studies have performed an economic analysis of LAES. In this study, the levelized cost of electricity was calculated and compared with that of other energy storage systems. As a result, the levelized cost of electricity of LAES was $371/MWh. This is approximately $292/MWh, $159/MWh, $118/MWh, and $3/MWh less than that of the LiCd battery, VRFB battery, Lead-acid battery, and NaS battery. In addition, the cost was approximately $62/MWh and $195/MWh more than that of Fe-Cr flow battery and PHS. Sensitivity analysis of the levelized cost of electricity according to the main economic factors was performed, and economic uncertainty analysis was performed through a Monte-Carlo simulation. The cumulative probability curve showed the levelized cost of electricity of LAES, reflecting price fluctuations in the air compressor cost, electricity cost, and standing reserve hourly fee.

진동대 시험을 통한 Fill Dam의 내진 안정성 평가 (Evaluation of the Seismic Stability of Fill Dam by Shaking Table Tests)

  • 윤원섭;채영수;박면규
    • 한국지반신소재학회논문집
    • /
    • 제10권4호
    • /
    • pp.81-92
    • /
    • 2011
  • 본 연구에서는 흙 댐 구조물의 지진저항 특성을 파악하기 위하여 3가지 대표단면을 기초로 하여 축소모형의 비율에 해당하는 상사법칙을 고려하여 각각 1:100, 1:70, 1:50으로 토조를 제작하였다. 그리고 국내 설계기준에 준하여 장주기인 Hachinohe파, 단주기인 Ofunato파, 인공지진파를 가진하여 각 단면에 대해 가속도변화, 과잉간극수압, 수직 및 수평변위를 측정하고, 측정된 결과를 통하여 지반-구조물-유체의 상호작용에 따른 안정성을 평가하였다. 시험결과 시험 대상 단면의 변위는 지진 시 허용변위량 300mm에 비해 비교적 작은 변위로 지진 시 안정성을 확보하였다. 가속도 계측결과 Hachinohe파, Ofunato파는 할증률 20%정도로 평가되었지만 인공지진파는 할증률 30%정도로 평가되었다. 과잉간극수압비 측정결과 액상화 평가기준인 과잉간 극수압비 1이하로 모형단면은 액상화에 대해 안정성을 확보하였다.

액상화 가능 지반의 진동 도중 및 후의 잔류 변형에 대한 정량적 예측을 위한 하이브리드 시뮬레이션 시스템 (Geotechnical Hybrid Simulation System for the Quantitative Prediction of the Residual Deformation in the Liquefiable Sand During and After Earthquake Motion)

  • 권영철
    • 대한토목학회논문집
    • /
    • 제26권1C호
    • /
    • pp.43-52
    • /
    • 2006
  • 동적 지반 거동을 해석하기 위해 많은 모델들이 제안되어 사용되고 있지만 여전히 모델에 대한 이해와 합리적인 해석 파라미터의 평가는 매우 어려운 작업이다. 더욱이 지반 진동 해석에서 침투에 의해 추가적인 체적변화가 발생하는 경우에는 이를 설명할만한 적당한 모델이 아직까지 개발되지 못하고 있다. 따라서 본 연구에서는 공극수의 이동을 제어해 가면서 측방변위나 침하와 같이 액상화에 의해 일어나는 잔류변형을 정량적으로 산정할 수 있는 하이브리드 시뮬레이션 시스템을 개발하였다. 본 시스템은 초기 전단을 받는 약간 기울어진 지반에 대한 일차원 동적 문제가 주요한 해석 대상이 되며 지반은 운동방정식과 연속조건식의 지배를 받는다. 또한, 이 시스템에서는 요소시험체가 흙의 구성관계를 대신하게 되며, 대상 지반의 동적 응답을 직접 공시체로부터 도입하며 해석을 수행하므로 액상화라고 하는 재료의 강한 비선형성을 재현하기 위한 파라미터의 입력과정을 생략할 수 있게 된다. 본 논문에서는 시스템의 기본 개념을 비롯한 여러 가지 구성요소에 대해 설명하며 해석 예제를 통해 지반 진동 해석에 있어서 투수성이 미치는 영향에 대해 검토하였다. 그 결과로 진동 도중 및 그 이후의 거동에도 체적 변화 특성이 모래의 동적 거동해석에 중대한 영향을 미치고 있음을 보였다.

석탄회의 정적 및 동적 특성 평가 (Evaluation of Static and Dynamic Characteristics of Coal Ashes)

  • 윤여원;채광석;송규환
    • 한국지반환경공학회 논문집
    • /
    • 제10권3호
    • /
    • pp.5-12
    • /
    • 2009
  • 본 연구는 발전소의 적치장에서 채취한 석탄회의 정적 및 동적 강도를 제시하였다. 석탄회는 주로 저회로 이루어져 있으며 정적 및 동적 강도를 평가하기 위하여 NGI형 단순전단시험, 반복단순전단시험 및 직접전단시험을 수행하였으며, 이러한 시험으로부터의 강도를 모래의 강도와 비교하였다. 본 연구에 사용된 석탄회 속에 있는 저회는 입도분포에 의하면 모래로 분류되었으며 모래보다 높은 강도 특성을 보였다. 석탄회를 토목공사에 활용되기 위해서 사질토와 석탄회를 50:50의 비율로 배치플랜트에서 섞어 사용하는 것은 사질토층과 석탄회층을 교대로 층별 시공하는 것보다 비효율적이다. 혼합시공과 층별시공을 모사하기 위하여 모래와 석탄회가 50:50으로 조성된 시료를 준비하였다. 시험결과 혼합에 의한 시료가 층별시료보다 약간 큰 정적 및 동적 강도를 나타내었다. 높은 강도는 주로 저회의 모난 입자로부터 기인된 것으로 보인다. 혼합시료에서 액상화시의 반복응력비는 반복횟수가 증가함에 따라 층별시료보다 급격히 감소하였다.

  • PDF