1 |
Jalalifar, H., Mojedifar, S., Sahebi, A.A. and Nezamabadi-pour, H. (2011), "Application of the adaptive neuro-fuzzy inference system for prediction of a rock engineering classification system", Comput. Geotech., 38(6), 783-790. https://doi.org/10.1016/j.compgeo.2011.04.005.
DOI
|
2 |
Jang, J.S.R., Sun, C.T. and Mizutani, E. (2005), Neuro-Fuzzy and Soft Computing-A Computational Approach to Learning and Machine Intelligence [Book Review]. IEEE Transactions on Automatic Control, 42. https://doi.org/10.1109/tac.1997.633847
DOI
|
3 |
Kwon, S. and Lee, C. (2018), "Thm analysis for an in situ experiment using FLAC3D-TOUGH2 and an artificial neural network", Geomech. Eng., 16(4), 363-373. https://doi.org/10.12989/gae.2018.16.4.363.
DOI
|
4 |
Li, B. (2011), "Effect of fabric anisotropy on the dynamic mechanical behavior of granular materials", Techniques. http://etd.ohiolink.edu/send-pdf.cgi/Li Bo.pdf?case1291071699
|
5 |
Gu, X., Yang, J. and Huang, M. (2013), "Laboratory measurements of small strain properties of dry sands by bender element", Soils Found., 53(5), 735-745. https://doi.org/10.1016/j.sandf.2013.08.011.
DOI
|
6 |
Hajian, A. and Ghane, A. (2015), "Prediction of Geotechnical Behavior (Shear Strength, Compression, Friction Angle) of Oil Contaminated Sandy Soils using Artificial Neural Networks", In 3th international conference on Oil, Gas and Petrochemical, Shahid Behesti University, Tehran, Iran.
|
7 |
Li, Y. (2016), "Teaching programming based on computational thinking", Proceedings - Frontiers in Education Conference, FIE, 2016-Novem(96), 241. https://doi.org/10.1109/FIE.2016.7757408.
DOI
|
8 |
Bayat, M. and Ghalandarzadeh, A. (2018), "Stiffness degradation and damping ratio of sand-gravel mixtures under saturated state", Int. J. Civil Eng., 16(10), 1261-1277. https://doi.org/10.1007/s40999-017-0274-8.
DOI
|
9 |
Bayat, M. and Ghalandarzadeh, A. (2019), "Influence of depositional method on dynamic properties of granular soil", Int. J. Civil Eng., 17(6), 907-920. https://doi.org/10.1007/s40999-019-00412-7.
DOI
|
10 |
Bosiljkov, V.Z., Totoev, Y.Z. and Nichols, J.M. (2005), "Shear modulus and stiffness of brickwork masonry: An experimental perspective", Struct. Eng. Mech., 20(1), 21-43. https://doi.org/10.12989/sem.2005.20.1.021.
DOI
|
11 |
Hajian, A. and Styles, P. (2018), Application of Soft Computing and Intelligent Methods in Geophysics. Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-66532-0.
DOI
|
12 |
Hardin, B.O. and Black, W.L. (1967). "Sand stiffness under various triaxial stresses", J. Terramech., 4(3), 70. https://doi.org/10.1016/0022-4898(67)90133-4.
DOI
|
13 |
Hardin, B. and Richart, F. (1963), "Elastic wave velocities in granularsoils", J. Soil Mech. Found. Div., 89(1), 33-66.
DOI
|
14 |
Hoyos, L.R., Suescun-Florez, E.A. and Puppala, A.J. (2015),. "Stiffness of intermediate unsaturated soil from simultaneous suction-controlled resonant column and bender element testing", Eng. Geol., 188, 10-28. https://doi.org/10.1016/j.enggeo.2015.01.014.
DOI
|
15 |
Wichtmann, T., Navarrete Hernandez, M.A. and Triantafyllidis, T. (2015), "On the influence of a non-cohesive fines content on small strain stiffness, modulus degradation and damping of quartz sand", Soil Dyn. Earthq. Eng., 69, 103-114. https://doi.org/10.1016/j.soildyn.2014.10.017.
DOI
|
16 |
Teachavorasinskun, S. and Pongvithayapanu, P. (2016), "Shear wave velocity of sands subject to large strain triaxial loading", Geomech. Eng., 11(5), 713-723. https://doi.org/10.12989/gae.2016.11.5.713.
DOI
|
17 |
Carette, J. and Staquet, S. (2016), "Monitoring the setting process of eco-binders by ultrasonic P-wave and S-wave transmission velocity measurement: Mortar vs concrete", Constr. Build. Mate., 110, 32-41. https://doi.org/10.1016/j.conbuildmat.2016.02.019.
DOI
|
18 |
Sivapullaiah, P.V., Guru Prasad, B. and Allam, M.M. (2009), "Modeling sulfuric acid induced swell in carbonate clays using artificial neural networks", Geomech. Eng., 1(4), 307-321. https://doi.org/10.12989/gae.2009.1.4.307.
DOI
|
19 |
Ueno, K., Kuroda, S., Hori, T. and Tatsuoka, F. (2019), "Elastic shear modulus variations during undrained cyclic loading and subsequent reconsolidation of saturated sandy soil", Soil Dyn. Earthq. Eng., 116, 476-489. https://doi.org/10.1016/j.soildyn.2018.10.041.
DOI
|
20 |
Wang, G.X. and Kuwano, J. (1999), "Modeling of strain dependency of shear modulus and damping of clayey sand", Soil Dyn. Earthq. Eng., 18(6), 463-471. https://doi.org/10.1016/S0267-7261(99)00010-X.
DOI
|
21 |
Xiao, H., Yao, K., Liu, Y., Goh, S.H. and Lee, F.H. (2018), "Bender element measurement of small strain shear modulus of cement-treated marine clay - Effect of test setup and methodology", Constr. Build. Mater., 172, 433-447. https://doi.org/10.1016/j.conbuildmat.2018.03.258.
DOI
|
22 |
Liang, J., Han, B., Todorovska, M.I. and Trifunac, M.D. (2018), "2D dynamic structure-soil-structure interaction for twin buildings in layered half-space II: Incident SV-waves", Soil Dyn. Earthq. Eng., 113, 356-390. https://doi.org/10.1016/j.soildyn.2018.05.023.
DOI
|
23 |
Mozumder, R.A. and Laskar, A.I. (2015), "Prediction of unconfined compressive strength of geopolymer stabilized clayey soil using artificial neural network", Comput. Geotech., 69, 291-300. https://doi.org/10.1016/j.compgeo.2015.05.021.
DOI
|
24 |
Goudarzy, M., Rahemi, N., Rahman, M.M. and Schanz, T. (2017), "Predicting the maximum shear modulus of sands containing nonplastic fines", J. Geotech. Geoenviron. Eng., 143(9), 06017013. https://doi.org/10.1061/(asce)gt.1943-5606.0001760.
DOI
|
25 |
Hussien, M.N. andKarray, M. (2016), "Shear wave velocity as a geotechnical parameter: An overview", Can. Geotech. J., 53(2), 252-272. https://doi.org/10.1139/cgj-2014-0524.
DOI
|
26 |
Yang, Z.X., Lit, X.S., Yang, J., Li, X.S. and Yang, J. (2008), "Quantifying and modelling fabric anisotropy of granular soils", Geotechnique, 58(4), 237-248. https://doi.org/10.1680/geot.2008.58.4.237.
DOI
|
27 |
Camacho-Tauta, J., Cascante, G., Santos, J.A., Viana da Fonseca, A.A. and Dos Santos, J.A. (2011), "Measurements of shear wave velocity by resonant-column test, bender element test and miniature accelerometers", Proceedings of the 2011 Pan-Am Geotechnical Conference, (1998), 1-9. https://www.academia.edu/download/45552620/Measurements_of_shear_wave_velocity_by_r20160511-16261-1xq5sit.pdf. Accessed 18 May 2020.
|
28 |
Rahman, M.M., Cubrinovski, M. and Lo, S.R. (2012), "Initial shear modulus of sandy soils and equivalent granular void ratio", Geomech. Geoeng., 7(3), 219-226. https://doi.org/10.1080/17486025.2011.616935.
DOI
|
29 |
Saadat, M. and Bayat, M. (2022), "Prediction of the unconfined compressive strength of stabilised soil by Adaptive Neuro Fuzzy Inference System (ANFIS) and Non-Linear Regression (NLR)", Geomech. Geoeng., 17(1), 80-91. https://doi.org/10.1080/17486025.2019.1699668.
DOI
|
30 |
Youn, J.U.U., Choo, Y.W.W. and Kim, D.S.S. (2008), "Measurement of small-strain shear modulus Gmax of dry and saturated sands by bender element, resonant column, and torsional shear tests", Can. Geotech. J., 45(10), 1426-1438. https://doi.org/10.1139/T08-069.
DOI
|
31 |
Zhou, Z., Yang, H., Xing, K. and Gao, W. (2018), "Prediction models of the shear modulus of normal or frozen soil-rock mixtures", Geomech. Eng., 15(2), 783-791. https://doi.org/10.12989/gae.2018.15.2.783.
DOI
|
32 |
Zhu, S., Yang, G., Wen, Y. and Ou, L. (2014), "Dynamic shear modulus reduction and damping under high confining pressures for gravels", Geotech. Lett., 4, 179-186. https://doi.org/10.1680/geolett.14.00030.
DOI
|
33 |
Ghorbani, A. and Hasanzadehshooiili, H. (2018), "Prediction of UCS and CBR of microsilica-lime stabilized sulfate silty sand using ANN and EPR models; application to the deep soil mixing", Soils Found., 58(1), 34-49. https://doi.org/10.1016/j.sandf.2017.11.002.
DOI
|
34 |
Gu, X., Yang, J., Huang, M. and Gao, G. (2015), "Bender element tests in dry and saturated sand: Signal interpretation and result comparison", Soils Found., 55(5), 951-962. https://doi.org/10.1016/j.sandf.2015.09.002.
DOI
|
35 |
Yamada, S., Hyodo, M., Orense, R.P. and Dinesh, S.V. (2008), "Initial shear modulus of remolded sand-clay mixtures", J. Geotech. Geoenviron. Eng., 134(7), 960-971. https://doi.org/10.1061/(asce)1090-0241(2008)134:7(960).
DOI
|
36 |
Yang, J. and Yan, X.R. (2009), "Factors affecting site response to multi-directional earthquake loading", Eng. Geol., 107(3-4), 77-87. https://doi.org/10.1016/j.enggeo.2009.04.002.
DOI
|
37 |
Yu, P. and Richart, F.E. (1984), "Stress ratio effects on shear modulus of dry sands", J. Geotech. Eng., 110(3), 331-345. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:3(331).
DOI
|
38 |
Ferreira, C., da Fonseca, A. and Santos, J.A. (2007), "Comparison of simultaneous bender elements and resonant", Soil Stress-Strain Behavior: Measurement, Modeling and Analysis. Solid Mechanics and Its Applications, 523-535.
|
39 |
Luat, N.V., Lee, K. and Thai, D.K. (2020), "Application of artificial neural networks in settlement prediction of shallow foundations on sandy soils", Geomech. Eng., 20(5), 385-397. https://doi.org/10.12989/gae.2020.20.5.385.
DOI
|
40 |
Cho, H.I., Sun, C.G., Kim, J.H. and Kim, D.S. (2018), "OCR evaluation of cohesionless soil in centrifuge model using shear wave velocity", Geomech. Eng., 15(4), 987-995. https://doi.org/10.12989/gae.2018.15.4.987.
DOI
|
41 |
Pooya Nejad, F., Jaksa, M.B., Kakhi, M. and McCabe, B.A. (2009), "Prediction of pile settlement using artificial neural networks based on standard penetration test data", Comput. Geotech., 36(7), 1125-1133. https://doi.org/10.1016/j.compgeo.2009.04.003.
DOI
|
42 |
Rashidian, M., Ishihara, K., Kokusho, T., Kanatani, M. and Okamoto, T. (1995), "Effect of sample preparation methods on shear wave velocity", Proceedings of the 2nd International Conference on Seismology and Earthquake Engineering, Teheran, Iran.
|
43 |
Ruan, B., Miao, Y., Cheng, K. and Yao, E. lei. (2021), "Study on the small strain shear modulus of saturated sand-fines mixtures by bender element test", Eur. J. Enviro. Civil Eng., 25(1), 28-38. https://doi.org/10.1080/19648189.2018.1513870.
DOI
|
44 |
Senetakis, K. and Payan, M. (2018), "Small strain damping ratio of sands and silty sands subjected to flexural and torsional resonant column excitation", Soil Dyn. Earthq. Eng., 114, 448-459. https://doi.org/10.1016/j.soildyn.2018.06.010.
DOI
|
45 |
Shirley, D.J. (1978), "An improved shear wave transducer", J. Acoust. Soc. Am., 63(5), 1643-1645. https://doi.org/10.1121/1.381866.
DOI
|
46 |
Sihag, P., Tiwari, N.K. and Ranjan, S. (2019), "Prediction of unsaturated hydraulic conductivity using adaptive neuro- fuzzy inference system (ANFIS)", ISH J. Hydraulic Eng., 25(2), 132-142. https://doi.org/10.1080/09715010.2017.1381861.
DOI
|
47 |
Bayat, M. and Ghalandarzadeh, A. (2020), "Modified models for predicting dynamic properties of granular soil under anisotropic consolidation", Int. J. Geomech., 20(3), 04019197. https://doi.org/10.1061/(asce)gm.1943-5622.0001607.
DOI
|
48 |
Nathan, A.J. and Scobell, A. (2012), "How China sees America", In Foreign Affairs, 91, 191-196. https://doi.org/10.1017/CBO9781107415324.004.
DOI
|
49 |
Oh, T.M., Bang, E.S., Cho, G.C. and Park, E.S. (2017), "Estimation of undrained shear strength for saturated clay using shear wave velocity", Mar. Georesour. Geotec., 35(2), 236-244. https://doi.org/10.1080/1064119X.2016.1140855.
DOI
|
50 |
Alidoosti, A., Ajalloian, R. and Alireza, H. (2016), "Assessment of Geotechnical properties of sediments along Isfahan Line2 subway with emphasis on in-situ tests", Proceedings of the 5th International conference on Geotechnical Engineering and Soil Mechanics, Tehran, Iran.
|
51 |
Camacho-tauta, J.F., David, J. and Alvarez, J. (2013), "Comparison between resonant-column and bender element tests on three types of soils", Comparison between resonant-column and bender element tests on three types of soils, 80(1), 163-172. http://www.scielo.org.co/pdf/dyna/v80n182/v80n182a20.pdf
|
52 |
Cha, M. and Cho, G.C. (2007), "Shear strength estimation of sandy soils using shear wave velocity", Geotech. Test. J., 30(6), 484-495. https://doi.org/10.1520/gtj100011.
DOI
|
53 |
Chang, I. and Cho, G.C. (2010), "A new alternative for estimation of geotechnical engineering parameters in reclaimed clays by using shear wave velocity", Geotech. Test. J., 33(3). https://doi.org/10.1520/GTJ102360.
DOI
|
54 |
Clayton, C.R.I. (2011), "Stiffness at small strain: Research and practice", Geotechnique, 61(1), 5-37. https://doi.org/10.1680/geot.2011.61.1.5.
DOI
|
55 |
El Mosallamy, M., El Fattah, T.T.A. and El Khouly, M. (2016), "Experimental study on the determination of small strain-shear modulus of loess soil", HBRC J., 12(2), 181-190. https://doi.org/10.1016/j.hbrcj.2014.11.010.
DOI
|
56 |
Dyvik, R. and Madshus, C. (1986), "Lab measurements of Gmax using bender elements", In Publikasjon - Norges Geotekniske Institutt. https://doi.org/10.1016/0148-9062(87)92023-7.
DOI
|