• Title/Summary/Keyword: Linseed Oil

Search Result 80, Processing Time 0.027 seconds

Effect of Different Dietary n-6 to n-3 Fatty Acid Ratios on the Performance and Fatty Acid Composition in Muscles of Broiler Chickens

  • Mandal, G.P.;Ghosh, T.K.;Patra, A.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.27 no.11
    • /
    • pp.1608-1614
    • /
    • 2014
  • The objective of this study was to investigate the different dietary ratios of n-6 to n-3 (n-6/n-3) fatty acid (FA) on performance and n-6/n-3 FA in muscles of broiler chickens. A total of 300 one-day-old Cobb chicks were randomly assigned to 3 treatments of 10 replicates in each (10 birds/replicate). Birds were fed on a corn-soybean meal-based diet containing 1% oil during starter (day 1 to 21) and 2% oil during finisher (day 22 to 39) phases, respectively. Treatments of high, medium and low dietary n-6/n-3 FA were formulated by replacing rice bran oil with linseed oil to achieve n-6/n-3 FA close to >20:1, 10:1 and 5:1, respectively. Average daily gain, average daily feed intake, and feed conversion ratio were similar (p>0.05) among the treatments. Serum glucose, cholesterol and triglycerides concentrations were not affected (p>0.05) by dietary treatments. In breast, concentration of C18:3n-3 was significantly greater (p = 0.001) for medium and low vs high n-6/n-3 FA, while concentrations of C20:5n-3, C22:6n-3, total n-3 FA, and n-6/n-3 FA were significantly higher for low vs medium, and medium vs high dietary n-6/n-3 FA. In contrast, concentrations of C18:2 and mono-unsaturated FA (MUFA) were lower for low vs high dietary n-6/n-3 FA. In thigh muscles, concentrations of C20:5n-3 were higher (p<0.05) for medium and low vs high dietary n-6/n-3 FA, and concentrations of C18:3n-3, C22:6, and n-3 FA were greater (p<0.05) for medium vs high, low vs medium dietary n-6/n-3 FA. However, concentrations of C18:1, MUFA, n-6/n-3 were lower (p<0.05) for low and medium vs high dietary n-6/n-3 FA. In conclusion, lowering the dietary n-6/n-3 FA did not affect the performance of chickens, but enhanced beneficial long-chain n-3 FA and decreased n-6/n-3 FA in chicken breast and thigh, which could be advantageous for obtaining healthy chicken products.

Current Trend and Perspective of Research and Development on Biologically - Active Livestock Products (생리활성을 강화한 기능성 축산식품의 연구개발 동향과 전망)

  • 이복희
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.6 no.2
    • /
    • pp.257-271
    • /
    • 1996
  • Livestock products like meat, milk and egg have been principal food sources for human beings since the historic periods of time. Nowadays consumption of these food items have been avoided due to its high contents of SFA, cholesterol and total fat which are major culprits of chronic adult diseases causing major deaths of people. However, the relationship between livestock products and diseases is not always true because the amounts of fat and cholesterol and types of fatty acids in meat and meat by-products depend on the part of the meat and types of animals. Although meat intakes do not always cause mai or adult diseases, still the developmental necessity does exist for animal foods equipped with biologically active properties, which in turn can improve nutritional status and health more than ever Meat with high protein lean part and low fat can be produced by applying synthetic somatotropin and beta-adrenergic agonists like clenbuterol, cimaterol etc. during breeding. This application brings benefits like higher growth rate, lower fat contents and improve feed efficiency ratios. Meats fortified with long chain PUFA($\omega$-3 fatty acids) can also be produced by modulating feed composition.Egg Products have faced the reduced sales annually because of its high cholesterol contents. Recently brand eggs fortified with special nutrients or chemical components having functional proper ties in the human body system are very popular Research Interests have been focused on eggs with low cholesterol and high omega-3 fatty acids. Low cholesterol eggs and high omega-3 eggs can be produced in several different ways, but popular way to increase is feeding the feeds with different oil sources containing high omega-3 and 6 fatty acids such as fish oil, perilla oil, linseed oil and lecithin etc. But proper compositon of feed formula should be found and economically beneficial. Brand eggs fortified with vitamin, mineral, unknown growth factors are also manufactured. Low cholesterol and high $\omega$-3 PUFA milk are marketed recently Cholesterol removal technology is not completely established and has several limitations to be overcome. Milk fortified with $\omega$-3 fatty acids is made by incorporating high &13 fatty acid foods in feed despite of extraordinary way of fatty acid metabolism In cow. All these biologically active products will be very beneficial and useful for human consumption when limitations of manufacturing technology such as safety and lowered sensory qualities are resolved. Furthermore, thorough and precise tests and quality control for these products should be performed to ensure the effectiveness and usefulness in terms of improving health and nutritional status in general. However one caution should be pointed out to lay people informing that these items are nothing but a food and not panacea. Therefore, it is important to remember that the only way of maintaining good health is absolutely through consuming balanced diet.

  • PDF

Screening Methods for Plant-Coating Materials and Transpiration Inhibitory Effect of Soybean Oil to Crops (식물 코팅 소재 선발법과 작물들에 대한 콩 오일의 증산 억제 효과)

  • Jung, In Hong;Park, No Bong;Kim, Sang-Yeol;Na, Young-Eun;Kim, Soon-Il
    • Korean Journal of Plant Resources
    • /
    • v.27 no.4
    • /
    • pp.380-391
    • /
    • 2014
  • Plants as well as crops are damaged by a combination of the hot and dry winds that has been a major factor in the reduction of crop production. A means to protect them from damaging conditions is to consider a coating material. In this study, we established laboratory screening methods to find a coating material to protect a crop from rapid transpiration caused by various factors. In a test measuring the weight loss of kidney bean seedlings for 6 days, Avion treatments decreased its weight loss (P=0.05). Owing to long-time spend in completing this assay, we performed a more simple method using a cobalt chloride paper strip, which changes from blue to red colors under water condition. Beewax, guagum, paraffin liquid, soybean oil, and PE-635 gave a waterproofing effect above 37 and 43% at 0.5 and 1 h after treatment, respectively. However, these tested materials did not show significant waterproofing results at 2 h. Although the methods produced reasonable results, a screening method to obtain more objective data is needed. An alternative is to use an instrument that can detect the transpiration of crop leaves. In a preliminary test using barley leaves, a portable photosynthesis system showed transpiration inhibition of 2% soybean oil and 10 times-diluted Avion under field conditions. In another test using the leaves of maize seedlings and apricot tree, 2% liquid paraffin and plant oils such as apricot oil, linseed oil, olive oil, and soybean oil showed significant transpiration inhibition (P=0.05). Especially, paraffin liquid and soybean oil selected from above tests gave good transpiration inhibitory effects against rice at 2%. In addition, the mixture of 2% soybean oil and a spreader showed more elevated inhibition results comparing with soybean oil or the spreader alone indicating that the spreader may be attributed to more uniform diffusion of the hydrophobic material onto the leaf surface of maize seedlings. The hydrophobic material coated physically the stomata and cuticle layers on leaf surfaces of rice. These hydrophobic materials screened in this study are expected to be used as plant coating materials.

Comparing Performances of Natural Finishing Material for Finish on Earth Wall (흙벽 마감을 위한 천연 마감재 성능 비교 연구)

  • Hwang, Hey zoo;Kang, Nam Yi;Kim, Tae Hoon
    • KIEAE Journal
    • /
    • v.12 no.5
    • /
    • pp.71-76
    • /
    • 2012
  • As reviewed of developments of Korean earth architecture, earth-made buildings have been dwindled gradually since "the new community movement" and earth have been recognized as materials which are not so good to human health and in result, earth-related techniques have been also forgotten. However, recently the earth architecture has been more attracting back many attentions thanks to the people who are interested in health and wellbeing and the earth related techniques or skills got keenly required. The present study has investigated and reproduced earth finishing materials which are based on natural materials as basic stuffs to use them as the finishing materials of the modern earth architecture. For the test, the finishing materials have been divided roughly into sorts of pastes and oils. In case of applying finishing materials onto earth surfaces, the moisture permeability test was conducted to measure a water-absorbing speed, and at the case of using finishing materials for interior works moisture adsorption/desorption test was performed to verify the indoor humidity regulation ability, and further a test to check whether to be stained when contacted with the finishing materials, was conducted. If there is not any stain it might be recognized to be high quality of moisture adsorption/desorption and so seaweed pastes or starches might be used for paste finishing materials and for natural oils, beans are desirable in practical ways. As low-quantity of moisture adsorption materials, linseed oil is most desirable and also beaned water over75% are thought to be useful.

Effect of Temperature on Biology of Different Isolates of Catenaria anguillulae

  • Gupta, R.C.;Singh, K.P.
    • Mycobiology
    • /
    • v.32 no.1
    • /
    • pp.17-23
    • /
    • 2004
  • Growth of ten isolates of Catenaria anguillulae on linseed oil-cake agar medium was studied at 10, 13, 15, 20, 25, 30, 35, 40, 44 and $46^{\circ}C$. The cardinal temperatures of these isolates were also determined. Observations clearly revealed that the isolates differed in their temperature requirements. Isolate GA was found to grow best at $40^{\circ}C$, whereas VF isolate showed best growth at 35 and $40^{\circ}C$. Isolates PA, KA, CHP, KO, MA and SWP grew best at $35^{\circ}C$. The other isolates(KP and MMT) showed their best growth at $30^{\circ}C$. Based on radial growth, isolates were categorized as fast growing, medium growing and slow growing. Studies on effect of different temperatures on pathogenicity was made using only three isolates: VF, KP and MA against Xiphinema basin. VF isolate caused maximum infection at $40^{\circ}C$, whereas KP and MA isolates caused maximum infection at $30^{\circ}C$. The morphology of sporangia varied with temperature in isolates producing elongate-elliptical or filamentous sporangia. In VF isolate the sporangia were largely iilamentous to elongate elliptical at $30^{\circ}C$. The width of the sporangia increased with increasing and decreasing temperatures. At $44^{\circ}C$ the sporangia of this isolate were mostly broadly elliptical or spherical. This clearly indicates that sporangia vary in morphology with temperature. From the morphometrical studies it was understood that sporangial morphology was more consistent and reliable for grouping of isolates. Based on the morphology of sporangia the isolates of C. anguillulae were characterized in three groups viz., Mamentouslelongate elliptical(VF, KA, GA and SWP), spherical(PA, KP, MA and MMT) and vertically elongate sporangia(CHP and KO).

Surface Hardness and Water Repellet of Earth Paint (흙페인트의 적절한 사용을 위한 표면경도 및 발수성에 관한 연구)

  • Hawng, Hey-Zoo;Roh, Tea-Hak;Lee, Jin-Sil
    • KIEAE Journal
    • /
    • v.16 no.3
    • /
    • pp.83-88
    • /
    • 2016
  • Purpose : This study aimed to verify the surface hardness and water repellency of earth paint manufactured with earth, a natural material, and provide the results as basic data for paint made with natural materials. Method : After presenting the accurate manufacturing methods for basic materials for paint, the authors conducted and analyzed experiments to evaluate surface hardness and water repellency, fundamental performance indicators for paint, based on different mixture ratios. From the results of the experiment to assess the surface hardness of flour-based earth paint, we observed high surface hardness only after painting the specimen three times. Since potato starch-based earth paint has higher viscosity than its flour-based counterpart, the former did not paint well on the first occasion, resulting in low surface hardness. After painting two or more times, however, it was observed to have higher surface hardness than flour-based earth paint. Result : It was found that at least three iterations of painting was required to obtain high surface hardness of potato starch-based earth paint. Furthermore, the results of the water resistance experiment of earth paint suggest that the use of environment-friendly finishing materials coupled with boiled linseed oil will mitigate the drawbacks of earth paint. The experiment with one-year-old specimens also demonstrated similar water repellent characteristics, which indicates that the performance will improve once the paint has dried for a sufficient period of time.

Visualization of Self-Healing Function of Protective Coating for Concrete (콘크리트 보호코팅재의 자기치유 기능의 시각화)

  • Kim, Dong-Min;Choi, Ju-Young;Jin, Seung-Won;Nam, Kyeong-Nam;Park, Hyeong-Joo;Chung, Chan-Moon
    • Journal of Convergence for Information Technology
    • /
    • v.9 no.10
    • /
    • pp.87-93
    • /
    • 2019
  • Microcapsules were prepared by using a mixture of linseed oil and a small amount of fluorescent fluid as a core material. Self-healing protective coatings were prepared by applying coating formulations containing varying amounts of microcapsules on mortar surface. After scratch or crack was generated in the coating, when the damaged region was exposed to ultraviolet light (${\lambda}=365nm$), it was observed that fluorescence emission area increased with increasing microcapsule loading. In the cases of the self-healing coatings having 20wt% or more microcapsule loading, the damaged region was almost filled with the healing agent. In water sorptivity test, the self-healing coating having 20wt% or more microcapsule loading showed a healing efficiency of about 85%. The fluorescence emission from the damaged region was easily observed at a distance of 3 m. The self-healing protective coating is expected to be useful to confirm its self-healing function with the eye.

Effect of Lipid Sources with Different Fatty Acid Profiles on Intake, Nutrient Digestion and Ruminal Fermentation of Feedlot Nellore Steers

  • Fiorentini, Giovani;Carvalho, Isabela P.C.;Messana, Juliana D.;Canesin, Roberta C.;Castagnino, Pablo S.;Lage, Josiane F.;Arcuri, Pedro B.;Berchielli, Telma T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.28 no.11
    • /
    • pp.1583-1591
    • /
    • 2015
  • The present study was conducted to determine the effect of lipid sources with different fatty acid profiles on nutrient digestion and ruminal fermentation. Ten rumen and duodenal fistulated Nellore steers (268 body weight${\pm}27kg$) were distributed in a duplicated $5{\times}5$ Latin square. Dietary treatments were as follows: without fat (WF), palm oil (PO), linseed oil (LO), protected fat (PF; Lactoplus), and whole soybeans (WS). The roughage feed was corn silage (600 g/kg on a dry matter [DM] basis) plus concentrate (400 g/kg on a DM basis). The higher intake of DM and organic matter (OM) (p<0.001) was found in animals on the diet with PF and WF (around 4.38 and 4.20 kg/d, respectively). Treatments with PO and LO decreased by around 10% the total digestibility of DM and OM (p<0.05). The addition of LO decreased by around 22.3% the neutral detergent fiber digestibility (p = 0.047) compared with other diets. The higher microbial protein synthesis was found in animals on the diet with LO and WS (33 g N/kg OM apparently digested in the rumen; p = 0.040). The highest C18:0 and linolenic acid intakes occurred in animals fed LO (p<0.001), and the highest intake of oleic (p = 0.002) and C16 acids (p = 0.022) occurred with the diets with LO and PF. Diet with PF decreased biohydrogenation extent (p = 0.05) of C18:1 n9,c, C18:2 n6,c, and total unsaturated fatty acids (UFA; around 20%, 7%, and 13%, respectively). The diet with PF and WF increased the concentration of $NH_3-N$ (p<0.001); however, the diet did not change volatile fatty acids (p>0.05), such as the molar percentage of acetate, propionate, butyrate and the acetate:propionate ratio. Treatments PO, LO and with WS decreased by around 50% the concentration of protozoa (p<0.001). Diets with some type of protection (PF and WS) decreased the effects of lipid on ruminal fermentation and presented similar outflow of benefit UFA as LO.

Studies on Requirements of Optimum Dietary Essential Fatty Acids in Juvenile Eel, Anguilla japonica (치어기 뱀장어의 사료내 필수지방산 요구량에 관한 연구)

  • 배준영;한경민;박건준;배승철
    • Journal of Aquaculture
    • /
    • v.17 no.4
    • /
    • pp.275-281
    • /
    • 2004
  • The present study was conducted to evaluate dietary requirements for essential fatty acids (EFAs) such as linoleic acid (LA, l8:2n-6), -lenolenic acid (LNA, 18:3n-3), or docosahexaenoic acid (DHA, 22:6n-3), eicosapentaenoic acid (EPA, 20:5n-3) and arachidonic acid (ARA, 20:4n-6) in juvenile eel Anguilla japonica cultured in a recirculating system for 16 weeks. The experimental diets contained 50% crude protein, 10% crude lipid and 3800 kcal/kg energy.Brown fish meal and blood meal were used as the main protein sources, while coconut oil, com oil and linseed oil were used as the lipid source to yield target fatty acids ratios. At the end of the trial, the effects of essential fatty acids supplementation on weight gain (WG), specific growth rate (SGR), feeding efficiency (FE), proximate composition andwhole body fatty acids contents were examined. WG, SGR, and FEof eels fed diet D2, D3, was significantly higher (P<0.05) than those of fish fed the other diets. Whole body HUFA concentration of eels fed D 1 was significantly lower (P<0.05) than those fed the other diets. HUFA/SFA (saturated fatty acids) ratio of whole body in eels fed diets D2, D3 and D6 were significantly higher than that of eels fed diet D1 (P<0.05).DHA/EPA ratio of whole body in eels fed diet D7was significantly higher than those fed the other diets; and eels fed diet D5 showed the lowest DHA/EPA ratio among all the dietary treatments (P<0.05).Based on the experimental results, we concluded that LNA (n-3) and LA (n-6) were necessary for optimum growth of juvenile eel, and the dietary requirement of LNA and LA were 0.35∼0.5% and 0.5∼0.65%, respectively.

A Study on the Linoleum of the Deoksugung and Changdeokgung Palaces in the Early 20th Century: focusing on its manufacturing process, characteristics, and usage (20세기 초 덕수궁·창덕궁에 유입된 리놀륨(Linoleum) 바닥재 연구: 리놀륨의 제작 방식과 특성 및 사용을 중심으로)

  • Choi, Jihye
    • Korean Journal of Heritage: History & Science
    • /
    • v.54 no.1
    • /
    • pp.18-31
    • /
    • 2021
  • Linoleum is a resilient, hygienic, and eco-friendly floor covering. It was developed in England by Frederick Walton in 1863. Made of cork flour, linseed oil, and burlap as its main materials, the flexible and waterproof linoleum became globally popular in the early 20th century. Unlike the vinyl coverings, the burlap-backed linoleum was used not only in commercial spaces but also in household areas like kitchens, bathrooms, and even living rooms. As a global product, linoleum was imported and used in Korean palaces like Deoksugung and Changdeokgung in the early modern period. According to the record Deoksugung Won-Ahn, linoleum was applied to the major buildings, including Hamnyeongjeon, Deokhongjeon, and Jeonggwanheon, and various other venues. The linoleum used in these places are mainly monochrome blue and brown color, which probably means that they are from England. The trade records in the early 20th century show that linoleum was imported mainly from England and America. The Ewangjik building floor plan in the Changdeokgung Palace shows that linoleum was used extensively. There are even some originals, which were laid in 1920 and left in the Changdeokgung Palace. When Daejojeon and Huijeongdang were rebuilt in 1920, the interior was outfitted with western features and linoleum was used in areas such as bathrooms, the tonsorial parlor, and one of the rooms on the west side of Huijeongdang. In situ in the Daejojeon and Huijeongdang areas in the Changdeokgung Palace are monochrome, patterned black, and stylized floral tile patterned, which are closely similar to American products made by ALC and Armstrong company. This study will help us better understand linoleum's characteristics, its uses and the material itself. It will also form the basis for the restoration of Changdeokgung Palace as well as other modern interiors with linoleum flooring in the future.