• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권12호
• /
• pp.609-615
• /
• 2005

A 30kW electrical power conversion system is developed for a variable speed wind turbine. In the wind energy conversion system(WECS) a synchronous generator with field current excitation converts the mechanical energy into electrical energy. As the voltage and the frequency of the generator output vary according to the wind speed, a 6-bridge diode rectifier and a PWM boost chopper is utilized as an ac-dc converter maintaining the constant dc-link voltage with only single switch control. An input current control algorithm for maximum power generation during the variable speed operation is proposed without any usage of speed sensor. Grid connection type PWM inverter converts dc input power to ac output currents into the grid. The active power to the grid is controlled by q-axis current and the reactive power is controlled by d-axis current with appropriate decoupling. The phase angle of utility voltage is detected using software PLL(Phased Locked Loop) in d-q synchronous reference frame. Experimental results from the test of 30kW prototype wind turbine system show that the generator power can be controlled effectively during the variable speed operation without any speed sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1358-1360
• /
• 2002

This paper presents a modeling and simulation of a utility-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm for the wind turbine and presents the relationship of wind turbine output, rotor speed, power coefficient, tip-speed ratio and wind speed when the wind turbine is operated under the maximum power control algorithm. The control objective is to extract maximum power from wind and transfer the power to the utility. This is achieved by controlling the pitch angle of the wind turbine blades. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor speed, pitch angle, and generator output.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.144-149
• /
• 2016

This paper presents a power control method of high-speed single-phase BLDC motor. Most electric appliances require a power factor corrector (PFC) to mitigate grid current harmonics. However, the reactive components and power semiconductors in the PFC increase system cost and dimension. In this paper, a new motor drive system for a high-speed single-phase BLDC motor is proposed, which can decrease grid current harmonics without PFC by directly manipulating motor power and eliminating bulky electrolytic dc-link capacitor. Given that the proposed motor power control method does not require motor current controller, no current sensor is necessary. Moreover, the proposed algorithms can be easily implemented using a low-cost micro-controller. The effectiveness of the proposed power control method is verified by experiments.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권8호
• /
• pp.391-397
• /
• 2002

This paper presents a modeling and simulation of a PI controller for maximum power extraction of a grid-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm fnr a wind turbine and proposes, in a graphical form, the relationships of wind turbine output, rotor speed, power coefficient, tip-speed ratio with wind speed when the wind turbine is operated under the maximum power control. The control objective is to always extract maximum power from wind and transfer the power to the utility by controlling both the Pitch angle of the wind turbine blades and the inverter firing angle. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor angle and rotor speed, pitch angle, and generator output.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.179-181
• /
• 1999

Sensorless PMSM is much studied for the industrial applications and home appliances because a mechanical sensor reduce reliability and increases cost. Most of sensorless algorithm have poor performances in a low speed range. This paper investigates Performance improvement in a low speed range of PMSM. The proposed control scheme is based on the optimization of ratio between the command and dc-link voltages. The experiment is performed in this study. and the result shows the improved Performance in a low speed range.

• ETRI Journal
• /
• 제37권5호
• /
• pp.906-916
• /
• 2015

High-speed I/O channels require adaptive techniques to optimize the settings for filter tap weights at decision feedback equalization (DFE) read channels to compensate for channel inter-symbol interference (ISI) and crosstalk from multiple adjacent channels. Both ISI and crosstalk tend to vary with channel length, process, and temperature variations. Individually optimizing parameters such as those just mentioned leads to suboptimal solutions. We propose a joint optimization technique for crosstalk cancellation (XTC) at DFE to compensate for both ISI and XTC in high-speed I/O channels. The technique is used to compensate for between 15.7 dB and 19.7 dB of channel loss combined with a variety of crosstalk strengths from $60mV_{p-p}$ to $180mV_{p-p}$ adaptively, where the transmit non-return-to-zero signal amplitude is a constant $500mV_{p-p}$.

• 전자공학회논문지
• /
• 제54권8호
• /
• pp.34-41
• /
• 2017

V2I(Vehicle to Infrastructure) 통신은 ITS(Intelligent Transportation Systems)와 텔레매틱스 서비스를 제공하기 위한 차량과 노변 기지국간 통신 기술을 말한다. 차량은 Probe data를 기지국을 통하여 수집하며, 기지국은 도로 상태나 교통 정보를 차량에 제공한다. 이러한 V2I 통신 서비스를 제공하기 위해서는 신뢰성 있으며 높은 전송률을 달성할 수 있는 링크 적응 기법이 필요하다. 수신단은 추정한 CSI(Channel State Information)를 송신단으로 피드백하며 송신단은 이 정보를 이용하여 링크 적응을 한다. 그러나 차량 속도에 의한 채널의 빠른 변화와 계층 간 처리 지연 시간으로 인해 추정한 CSI는 outdated되게 된다. 이를 위해, V2I 통신 시스템에서 링크 적응을 위한 채널 보간과 예측 기법이 필요하다. 본 논문에서는 ADPSS(Advanced Discrete Prolate Spheroidal Sequence) 채널 보간과 예측 기법을 제안한다. 제안한 기법은 정규 직교 기저를 만들고 상관 행렬을 이용하여 채널 보간과 예측을 한다. 또한, 주파수 도메인에서 잡음 제거를 위해 스무딩을 한다. 모의실험 결과, 기존 기법과 비교했을 때 제안한 기법이 차량의 높은 속도와 낮은 속도를 가지는 고속도로와 도심지에서 성능이 향상된 것을 볼 수 있다.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.681-687
• /
• 2017

This paper presents about an implementation of Video Transmitting and Receiving System(VTRS) for acquiring test data. The VTRS consists of two parts. The first is Transmitter Unit(TU) that is installed on a missile to acquire various kinds of data and transmit the data to the ground through RF signals. The second is Receiver Unit(RU) that receives the transmitted RF signals and reconstruct those to the original data. To gather a high speed data reliably and securely on the ground, the TU is designed by considering data transfer scheme, data compression, modulation method, encryption technic, link budget, and antenna radiation pattern. Further, a placement method of multiple receiving stations is suggested. The VTRS has been tested on a field to check the link margins and maximum receiving distance in a real environment. Finally, the VTRS is applied to a missile flight test and gathered high speed data reliably.

• 정보처리학회논문지C
• /
• 제12C권1호
• /
• pp.77-82
• /
• 2005

광 네트워크에서의 효율성과 안정성을 위해 보호 복구가 요구되면서 기존의 여러 보호 복구 방법들이 제안되고 있으며, 많은 연구가 진행되고 있다. 기존 연구 중에서 네트워크 토폴로지를 하나의 사이클로 구성하여 어느 한 링크가 손상되더라도 복구가 가능한 방법들이 제시되고 있다. 본 논문에서는 해밀턴 사이클(Hamiltonian cycle)을 이용하여 네트워크 토폴로지를 하나의 사이클이 아닌 몇 개의 다중 도메인으로 분리하여 장애 발생 시 해당 도메인 내에서 복구경로 설정이 가능한 알고리즘을 제안한다. 제안된 알고리즘을 시뮬레이션을 통해 분석한 결과 복구경로길이가 단일 사이클의 경우에 비해 $57{\%}$ 이상 감소함을 볼 수 있다. 즉, 다중 도메인으로 분리, 보호복구를 수행 할 경우 복구 용량의 증가는 크지 않으면서 고속 복구가 가능함을 확인할 수 있다.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.43-51
• /
• 2013

본 논문은 초고속 비행체에 탑재하여 대용량 자료를 송수신하는 원격측정링크 개발에 대하여 기술하였다. 고속 이동체 환경에서 고속 자료전송을 위해 기존에 주로 사용되던 PCM/FM 변조방식에 비해 대역폭 효율성, 주파수 선택적 페이딩, 도플러 주파수 옵셋 등을 고려하여 DQPSK 변조방식을 사용하였다. 또한 통신채널 장애의 주요 원인이 되는 멀티패스 간섭을 최소화하기 위해 다수의 수신안테나를 사용하여 공간다이버시티를 구현하였으며 추가적으로 터보코드를 오류정정부호로 사용하여 양질의 데이터를 수신할 수 있도록 개발하였으며 비행시험을 통하여 성능을 확인하였다.