• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.8
• /
• pp.2666-2687
• /
• 2022

As a new alternative communication scheme in 5G, unmanned aerial vehicle (UAV) is used as a relay in the remote base station (BS) for assistant communication. In order to ameliorate the quality of the backhaul link, a UAV backhaul transmission scheme based on improved Nash equilibrium (NE) strategy is proposed. First, the capacity of air-to-ground (A2G) channel by the link preprocess is maximized. Then, the maximum utility function of each UAV is used as the basis of obtaining NE point according to the backhaul channel and the backhaul congestion. Finally, the improved NE strategy is applied in multiple iterations until maximum utility functions of all the UAVs are reached, and the UAVs which are rejected by air-to-air (A2A) link during the process would participate in the source recovery process to construct a multi-hop backhaul network. Simulation results show that average effective backhaul rate, minimum effective backhaul rate increases by 10%, 28.5% respectively in ideal A2G channel, and 11.8%, 42.3% respectively in fading channel, comparing to pure NE strategy. And the average number of iterations is decreased by 5%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.46-53
• /
• 2007

The link-fault recovery in the normal Ethernet bridged networks has relied on the Spanning Tree Protocol(STP) or Rapid STP. However, STP can not offer fast error recovery which is needed real-time services such as aircraft. In this paper, we compare automatic protection switching(APS) providing fault-tolerant function in the BcN back bone system with Avionic Full Duplex Switched Ethernet(AFDX) which is recently equipped in the A380 for Airbone Databuses. Also, we propose a link-bypass scheme for improving fault-tolerant performance of the AFDX by connecting switches and bypass fault section when a fault is originated on the link. For comparing and verifying the performance of proposed scheme, we simulated Ethernet, AFDX, APS and proposed AFDX with link-bypass scheme using NS-2. The proposed AFDX with link-bypass scheme can be applied to aircrafts, BcN backbone networks and industrial automatic networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.397-404
• /
• 2006

As an increase in recent optical network-based IP services, GMPLS management framework becomes more important than ever before. In this paper, we propose the dynamic GMPLS path management algorithm, which can satisfy the users with their traffic engineering recovery requirements and find out the best backup service path under multiple link failures. To be more specific, we are deriving the soluble conditions of a backup path which is satisfied in a GMPLS network. In addition, through proposing the fast backup path selection algorithm, we can sufficiently satisfy a user's recovery requirement and minimally protect the suspension of the service against a link failure.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.55-62
• /
• 2023

Radio waves must pass through the unstable atmosphere for successful wireless data transmission from space to ground stations. Data link algorithms required by the International Space Data Systems Advisory Committee (CCSDS) must be capable of detecting and resynchronizing cryptographic and receiver-side errors. However, error recovery is not part of the CCSDS requirements. This paper proposes an algorithm that enables robustness and error recovery against various noises. We experimented with environments such as Gaussian, Salt, Pepper, and S&P noise through noise reduction filters, filters that improve sharpness, and EDSR. In addition, we compare similar algorithms SES Alarmed and DSES Alarmed.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1193-1196
• /
• 2003

This paper proposes a 2x oversampling method with a smart sampling for a clock and data recovery(CDR) circuit in a 2.5Gbps serial data link. In the conventional 2x oversampling method, the "bang-bang" operation of the phase detection produces a systematic jitter in CDR. The smart sampling in phase detection helps the CDR to remove the "bang-bang" operation and to improve the jitter performance. The CDR with the proposed 2x oversampling method is designed using Samsung 0.25${\mu}{\textrm}{m}$ process parameters and verified by simulation. Simulation result shows the proposed 2x oversampling method removes the systematic jitter.e systematic jitter.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1185-1188
• /
• 2003

This paper describes a design for a 2.5Gb/s serial data link CMOS transceiver based on the InfiniBand$^{TM}$ specification. The transceiver chip integrates data serializer, line driver, Tx PLL, deserializer, clock recovery, and lock detector. The designed transceiver is fabricated in a 0.25 ${\mu}{\textrm}{m}$ CMOS mixed-signal, 1-poly, 5-metal process. The first version chip occupies a 3.0mm x 3.3mm area and consumes 450mW with 2.5V supply. In 2.5 Gbps, the output jitter of transmitter measured at the point over a 1.2m, 50Ω coaxial cable is 8.811ps(rms), 68ps(p-p). In the receiver, VCO jitter is 18.5ps(rms), 130ps(p-p), the recovered data are found equivalent to the transmitted data as expected. In the design for second version chip, the proposed clock and data recovery circuit using linear phase detector can reduce jitter in the VCO of PLL.L.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10B
• /
• pp.841-848
• /
• 2004

In case of failure in the IP network services should be provided via a backup path which fully meets QoS requirements. In this regard, we in this paper suggest simple-PFC(5-PFC) to restore single link failure, iterative-PFC(i-PFC) for multiple link failures, and fault_node Avoidance-PFC(a-PFC) for failures of nodes such as routers. Taking the minimum cost rerouting problem into account, we compare and analyze performance of those three mechanisms carrying out Direct_destination Rerouting(DR).

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.128-132
• /
• 2004

This paper proposed a control strategy for flywheel energy/recovery system with induction machine. The system is based on a vector controlled induction machine driving a flywheel and address the problem of regulating the DC-Link system voltage against input power shut-down. And we proposed the method to damp the oscillation of DC-Link. Experimental results are presented which verify the performance of the strategy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9B
• /
• pp.791-798
• /
• 2004

In case of failure in the IP network, services should be provided via a backup path which fully meets QoS requirements. In this regard, we in this paper suggest simple-PFC(s-PFC) to restore single link failure, iterative-PFC(i-PFC) for multiple link failures, and fault_node Avoidance-PFC(a-PFC) for failures of nodes such as routers. Taking the minimum cost rerouting problem into account, we compare and analyze performance of those three mechanisms carrying out Direct-destination Rerouting(DR).

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.435-437
• /
• 1997

In order to develop the three phase GTO CSI with double recovery path of commutation energy by passive devices (LCD), we studied the clamping circuit to protect switching device and energy recovery circuit to recover absorbed energy of capacitor and DC link inductor. In this paper, we investigated how DC input power is increased or decreased according to energy recovery path with or not in the three phase GTO current source inverter. We used a induction motor as the load of inverter, and controlled a induction motor with V/F constant control. Experimental results show that dissipated DC power is decreased and capacitor voltage Vc is effectively suppressed by double recovery path.