• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.4
• /
• pp.117-122
• /
• 2003

The AC power lines and signal lines of info-communication networks are routed on overhead poles and are highly exposed to lightning strikes. Due to the potential difference between grounding points of AC power lines and signal lines, the electronic equipments connected to the signal lines can easily be damaged by lightning surges. In this work, in order to develop reliable methods of protecting information and communication facilities from lightning surges, the reliability and performance of SPDs (surge protective devices) were experimentally investigated in an actual-sized test circuit. The behaviors of SPDs against lightning surges from AC power lines and signal lines and the coordinated effects of SPD installation methods were evaluated. As a consequence, it was confirmed that the bypass arrester methods and common grounding system are both highly effective.

• Biomedical Science Letters
• /
• v.14 no.4
• /
• pp.263-267
• /
• 2008

Photodynamic therapy (PDT) is a treatment utilizing the generation of singlet oxygen and other reactive oxygen species (ROS), which selectively accumulate in target cells. Peroxiredoxin (prx) plays an important role in eliminating peroxides generated during metabolism. Prx exert protective antioxidant role in cells though peroxidase activity. The aim of present work is to investigate the cytotoxicity of photofrin-mediated PDT in prx IV-transfectant AMC-HN3 cell lines. We confirmed that PDT has an effect on ROS generation in prx IV-induced cell lines. Treatment of PDT in prx IV-HN3 cell lines inhibits cytotoxic effects. Prx IV-induced HN3 cell lines resists in cell death during PDT. Also, prx IV-HN3 cell lines treated PDT inhibited ROS generation in contrast with vector control. We indicated that prx IV-induced AMC-HN3 cell lines have a function as inhibitors during PDT.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.173-181
• /
• 2000

Depending upon the method of the surface generation and the quality of the boundary curves provided, the resulting surfaces may have global or local irregularities in many cases. Thus it would be necessary for the designer to evaluate the surface quality and to modify the surface. This capability is very important because the defect of the surface requires the rework of the dies that causes a big loss in cost and delivery time. To simulate the reflection line test in the actual production line, a faster generation algorithm is presented. Among., various surface interrogation methods using reflection lines, Blinn-Newell type of reflection mapping is applied to generate reflection lines on the trimmed NURBS surface. The generation of reflection lines is formulated as a surface-plane intersection problem, and solved by surface-contouring techniques. In addition, a modified reflection map is proposed to eliminate the discontinuity of reflection lines due to the configuration of the reflection map. A fast reflection line algorithm is developed utilizing an efficient traced contouring technique, and proved to be well suited for real-time quality-assessment task.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.101-108
• /
• 2013

To develop new varieties of rapeseed (Brassica napus L.), the seeds of three varieties, 'Naehan', 'Tammi', and 'Halla' were irradiated with proton ion beams and gamma rays with 0 to 2,000 Gy. We had selected 9 lines in $M_5$ generation, and their useful characteristics were investigated by progressing from $M_6$ to $M_7$ generation for checking uniformity and stability. The 9 lines selected in $M_5$ generation were maintained their characteristics in terms of flowering date, maturing date, and plant height through $M_6$ to $M_7$ generations. Especially, 2 lines of NP600-1-1-198-2-1 and NP1000-13-2-362-4-1 selected in $M_5$ generation derived from 'Naehan' had characteristics of early maturity and shorter stem than original variety, and they also were maintained characteristic of early maturity such as 10~11 days earlier flowering date and 6~9 days earlier maturing date through $M_6$ to $M_7$ generations. For stem length, they showed characteristics of shorter stem in 2 lines of NP600-1-1-198-2-1 line and NP1000-13-2-362-4-1 line about 16%, 25% shorter stem than original variety respectively through $M_6$ to $M_7$ generations. Furthermore, some characteristics of 2 lines compared to the original variety were similar or higher in weight of 1,000 seeds, number of branches per plant, number of siliqua per panicle, number of seeds per silique, oil contents, and oleic acid contents. The line with large and plump flowers selected in $M_5$ generation also showed large and dark yellow flowers through $M_6$ to $M_7$ generations. The lines with High oleic acid and low saturated fatty acid contents selected in $M_5$ generation were maintained characteristics through $M_6$ to $M_7$ generation and these useful characteristics were expected for developing a new variety for bio diesel uses.

• Journal of Internet Computing and Services
• /
• v.7 no.4
• /
• pp.11-22
• /
• 2006

Software product-lines methodology is the software development paradigm to build the target system by customizing the variable part of software assets according to requirements. To attain this, the commonalities and variabilities of the system family should be modeled explicitly at early stage. Although the researches on general software product-lines are active, the researches on component-based real-time embedded software product-lines are rather inactive. In this paper a code generation system to support the functional variabilities via feature model and generate the code for synchronization via state model is proposed to increase the productivity of the development of the real-time embedded software product-lines.

• Korean Journal of Breeding Science
• /
• v.41 no.2
• /
• pp.92-100
• /
• 2009

To investigate the mutagenecity of sodium azide (SA) and to select mutants having various agronomic characteristics in rice (Oryza sativa L. ssp. japonica), dry seeds of rice variety 'Suweon 472' were treated with 0, 0.5, 1.0, 2.0, and 4.0 mM SA solutions prepared in 0.1 M phosphate buffer (pH 3.0). Germination rate, seedling height and sterility were investigated in $M_1$ generation and chlorophyll mutations were observed in $M_3$ generation. Germination rate and seedling height decreased as the increase of SA concentration in $M_1$ generation, the maximum seed sterility (40.8%) was found at 4.0 mM SA concentration. Chlorophyll mutants were occurred in $M_3$ generation and the frequency calculated on a line basis was 13.5% at the same treatment. Many kinds of mutations for morphological and agronomic characters were observed and mutations with short culm and glabrous leaf were frequently found in $M_3$ generation. Interestingly, five mutant lines resistant to blast or bacterial blight (BB) were selected and evaluated with several isolates in $M_3$ generation although Suweon 472 has been known to be susceptible to blast and BB. These mutants showed all resistance to seven isolates of blast and a total of 76 lines among 2,567 lines evaluated showed resistant to race K1 of bacterial blight. Two mutant lines (440172 and 41272) showed different reaction to BB isolates from the other resistant mutants. A few kinds of endosperm mutants were also identified and most of them were waxy mutants.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.1
• /
• pp.95-101
• /
• 2000

In general, free form design depends on B-spline which is used for the generating hull lines in most of shipyards. But, nowadays, the NURBS method is applied to free form modeling method, which is able to more flexible transformation than B-Spline, and then became industrial standard in the various field. Therefore, this method has been considerably applied in new application fields which are required free form modelling. In this paper, the program called 2DSURF with 5 modules and developed for the generation of hull lines is described. It is examined whether the program can be applied to body lines, sheer lines, and half breadth lines.

• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.211-220
• /
• 2011

This study was carried out to develop salt tolerant varities of rapeseed (Brassica napus L.) which can be grown in the high salty reclaimed land. The seeds of three varieties 'Naehan', 'Tammi', and 'Halla' were treated by proton ion beams and gamma rays with 0 to 2,000 Gy. For the selection of salt tolerant lines, emergence and survival rate, and growth characteristics of $M_2$ to $M_4$ generations were investigated in the Saemangeum reclaimed fields with the different salt concentrations. The lines with potential salt tolerance were selected in the $M_4$ generation and tested indoor for their growth characteristics. There was no significant changes in the soil pH for $M_4$ generation during growth period. However, soil EC was higher in early spring than sowing period (mid October). In $M_4$ generation test, the seeds of original and selected line showed high rates of emergence and survival, as determined one month after sowing. After wintering, however, the original varieties showed the significant reduction in the survival rate, while the selected lines showed a higher survival rate and good growth, leading to the completion of their life cycle. Consequently we selected 9 lines from $M_4$ generation with better performance in growth and yield. Soil EC was $2.8{\sim}4.3dS{\cdot}m^{-1}$ during $M_4$ generation growth period. The laboratory test of the lines selected from $M_4$ generation was made for their salt tolerance potential. The selected lines showed higher chlorophyll and proline contents than the original varieties. There was also no significant difference in the emergence rate of seed between the original and selected varieties. In 200 mM natural sea salt, the $N{\gamma}600-21-1-641$ line derived from 'Naehan' was the highest in growth rate, leaf chlorophyll and proline contents. $T{\gamma}800-20-2-461$ line derived from 'Tammi' didn't show significant difference in growth rate compared to original variety in 200 mM and withered in 250 mM like other lines as time passed. $H{\gamma}200-7-1-740$ line showed similar growth and chlorophyll content compared to its original variety.

• Transactions of Materials Processing
• /
• v.12 no.6
• /
• pp.572-581
• /
• 2003

In this paper, an automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of non-symmetric H-and U-shaped sections. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u-and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for extrusion die of non-symmetric H-and U-shaped sections.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.44-51
• /
• 1992

This paper is concerned with the propram of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical-line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. The new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in gereral. And the node very close to the boundary is moved to the boundary. The automatic mesh generation composed of only rectangular elements is achieved by this procedure. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptible rectangular elements for the given boundaries.