• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.344-348
• /
• 2007

The acoustic liner has been used for the suppression of noise. The impedance characteristics of the acoustic liner are increased by the incident pressure. For the estimation of the acoustic liner on the incident acoustic pressure effect, the modified impedance model is suggested on the basis of the GE impedance prediction model. The modified impedance model is originated from the 3 parameter impedance model, and extended to the incident pressure parameter. The modified model is applied on the simple duct analysis with variant source pressure. Through the computation, it is observed that the fore directivity patterns of the duct are varied by the incident SPL level.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.245-254
• /
• 2009

Efficiency of landfill liners system is usually evaluated based on leakage rate and mass flux. In this study, composite liner systems including the GCL(geosynthetic clay liner) composite liner, the Subtitle D liner, the Wisconsin NR500 liner, and the recently utilized double composite liner, which is a combination of the GCL composite liner and Subtitle D-type liner, have been examined. The leakage rate through circular and long defects in the geomembrane (GM) of the liner system was analyzed with the aids of analytical and numerical methods. For the mass flux criterion, contaminant transport through defects in the GM of landfill liners can be evaluated based on the calculated leakage rates. The diffusion rate of volatile organic compounds through intact landfill liners was evaluated by performing a one-dimensional numerical model. Cadmium and toluene were adoptted in the analyses as typical inorganic and organic substances, respectively, which will be chemical species encountered during landfill operation. The performance-based evaluation indicates that the double composite liner systems are superior to the other types of liner.

• 한국항만학회지
• /
• 제10권2호
• /
• pp.51-59
• /
• 1996

The management of liner shipping company is an extremely complex activities, especially if a company aims to simultaneously optimize the cost and service of the company's operations in a competitive environment. This paper investigates the control process of containers in a typical container liner shipping and proposes day by day operational model for empty container control in the maritime container transportation system. We proposed a linear programming model for empty container control in container liner shipping and the computational results show utilities of the model.

• 한국추진공학회지
• /
• 제3권2호
• /
• pp.37-47
• /
• 1999

본 논문은 노즐내열재의 삭마로 인해 야기된 형상변화를 고려하면서 로켓노즐 내열재의 삭마량 및 온도분포를 해석하는 열반응해석에 대해 기술하였다. 열반응 해석에서 표면 삭마는 Zvyagin의 모델을, 내부 열분해는 Yaroslavtseva의 모델을 사용하였다. 노즐내열재의 형상변화로 인한 경계면 이동을 고려하기 위하여 변형가능한 유한요소 격자를 사용하였다. 본 수치해석기법의 타당성을 입증하기 위해 로켓 노즐내열재에 대해 열해석을 수행하였으며, 그 결과 수치해는 실험결과와 잘 일치함을 보였다. 노즐내열재에서의 시간에 따른 온도변화 및 삭마량을 계산하고 고찰하였으며 또한 탄소/탄소 내열재 및 탄소/페놀릭 내열재의 열반응상수가 노즐내열재의 삭마량에 미치는 영향에 대해서 검토하였다.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.399-410
• /
• 2020

Cavities often develop behind the vault during the construction of double-arch tunnels, generally in the form of various defects. The study evaluates the impact of cavities behind the vault on the mechanical and failure behaviors of double-arch tunnels. Cavities of the same sizes are introduced at the vault and the shoulder close to the central wall of double-arch tunnels. Physical model tests are performed to investigate the liner stress variation, the earth pressure distribution and the process of progressive failure. Results reveal that the presence of cavities behind the liner causes the re-distribution of the earth pressure and induces stress concentration near the boundaries of cavities, which results in the bending moments in the liner inside the cavity to reverse sign from compression to tension. The liner near the invert becomes the weak region and stress concentration points are created in the outer fiber of the liner at the bottom of the sidewall and central wall. It is suggested that grouting into the foundation soils and backfilling injection should be carried out to ensure the tunnel safety. Changes in the location of cavities significantly impact the failure pattern of the liner close to the vault, e.g., cracks appear in the outer fiber of the liner inside the cavity when a cavity is located at the shoulder close to the central wall, which is different from the case that the cavity locates at the vault, whereas changes in the location of cavities have a little influence on the liner at the bottom of the double-arch tunnels.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2862-2867
• /
• 2008

High-temperature components of gas turbine operated for certain period of time can be reused by being repaired or rejuvenated. In case of the gas turbine combustion liners, the biggest and the most important one in the high-temperature components, come in a repair shop after operated for 8,000 or 12,000 hours according to the model and go through the repair and rejuvenation in order to be reused. A stated combustion liner is the first channel which has the combustion gas reached a nozzle from a fuel nozzle. Materials and coating properties of old and new model combustion liners were investigated. To repair these components after the visual inspection, the coatings of combustion liners were removed and then FPI(Fluorescent Penetrant Inspection), a kind of the NDI(Non-Destructive Inspection), was conducted. Damage patterns and the number of the damaged components were classified and analyzed based on data provided from the visual inspection over a long period of time. Focusing on the difference between old model and new model combustion liners, we analyzed the damage distribution and changes and consequently concluded that new model combustion liner would increase repair rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.127-130
• /
• 2003

This paper presents the numerical thermal analysis for regeneratively cooled rocket thrust chambers. An integrated numerical model incorporates computational fluid dynamics for the hot-gas thermal environment, and thermal analysis for the liner and coolant channels. The flow and temperature fields in rocket thrust chambers is assumed to be axisymmetric steady state which is presumed to the combustion liner. The heat flux computed from nozzle flow is used to predict the temperature distribution of the combustion liner. As a result, we present the wall temperature of combustion liner and the temperature change of coolant.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.1012-1019
• /
• 2012

In this study, CNG composite vessel is analyzed by using coupled model with liner and composite layer. For the coupled model, a method using theoretical analysis and FEA is suggested: elastic solution for laminated tube is used for theoretical analysis of the composite vessel, FEA is performed to the model of CNG composite vessel in actual conditions. On the basis of these results, optimal thickness and winding angle of the composite layer considering the material properties and thickness of the liner are determined. The results of theoretical analysis and FEA are compared with those carried out in previous studies for verifying the suggested analysis method.

• Advances in environmental research
• /
• 제4권4호
• /
• pp.211-218
• /
• 2015

Traffic noise estimation models are useful in evaluation of the noise pollution in current circumstances. They are helpful tools for design and planning new roads and highways. Measurement of average traffic noise level is possible when traffic speed and volume are known. The objective of this study was to devise a model for prediction of highway traffic noise levels based on current traffic variables in Iran. The design of this model was to take the impact of traffic congestion into consideration and to be field tested. This study is a library research augmented by field study conducted on Saeedi Highway located south west of Tehran. The period for the field study lasted 5 days from 7-12 February, 2013. This study examined liner and non-liner methods in formulation of its model. Liner method without a fixed coefficient was the best fit for the intended model. The proposed model can serve as a decision making tool to estimate the impact of key influential factors on sound pressure levels in urban areas in Iran.

• 유통과학연구
• /
• 제14권6호
• /
• pp.99-106
• /
• 2016

Purpose - The antecedent to the relationship between the effect of the characteristics of strategic alliances and the performance of container liner shipping companies has been investigated in this study as container liner shipping companies' strategic alliances. It affects positively and negatively home, partner, and the third parties' performance in container liner shipping companies. Extensive literature reviews on shipper's strategic alliances reveal that strategic alliances in financial and non-financial performance of container liner shipping companies show the performance such as economic effects, business performance, global supply chain management performance, customer satisfaction, and forward integration and backward integration performance. The purpose of this study is to test empirically that the relationship between the characteristics of strategic alliances and financial and non-financial performance in container liner shipping companies. Structured equation modeling and confirmatory factor analysis were used to test the hypothesis using AMOS statistics program. Most previous researches focused on the relationship between the characteristics of strategic alliances and alliance types. There are few empirical studies that focus on business performance data because it is difficult to collect data in container liner shipping companies. However, this research measures financial and non-financial performance differently compared with the previous researches focusing on the characteristics of strategic alliances and alliance types measurements. Research design, data, and methodology - The conceptual model for the study is based on the studies of Lim (2010), Chen & Zhen (2009), and Wang & Meng (2014). The model is built around the factors of characteristics of strategic alliances and business performance. Cost, marketing, and service factors are regarded as proxy for the characteristics of strategic alliances. The financial and non-financial performance are regarded as proxy for the performance of strategic alliances. Based on the analysis of one hundred cases such as forwarder, shipper, and liner shipping companies, this study uses structural equation modeling to verify the effects of the characteristics of strategic alliances on business performance. Conclusions - This study provides container liner shipping companies to get some policy and practical implications in terms of the characteristics of strategic alliances and business performance. First, the cost factor for alliances characteristics has a positively significant influence on the financial and non-financial performance of strategic alliances. The cost factor relationship between high and low performance group does not have a significant difference on the performance of strategic alliances. Second, the marketing factor of alliances characteristics has a positively significant influence on the financial and non-financial performance of strategic alliances. The high performance group's marketing factor has a great non-financial performance than low performance group, but the low performance group's marketing factor has a grater financial performance than high performance group factor does. Third, the service factor of alliances characteristics has a negative influence on the non-financial performance of strategic alliances. The high performance group's service factor has a great non-financial performance than low performance group. Based on the findings from this study, related implications and future avenues deserve to be discussed.