• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권2호
• /
• pp.102-109
• /
• 2000

The magnetically levitated system technology is highly expected to contribute the new transportation system of the 21st century with its high velocity operation, better riding comforts, friendliness to environment and saving of maintenance labour. Its development has been completed in low speed and in high speed application. In 2005, the Transrapid with 430 km/h speed will go into operation between Berlin and Hamburg[1]. In the year 2000, the realization of JR-Maglev will be basically evaluated for commercial operation[2]. In korea, maglev test vehicle with magnet for levitation and single sided linear induction motor for propulsion is under test at 1 [km] test track in KIMM.[3,4] Here, a transverse flux linear motor in combination with the levitation and the guidance leads to a considerable high power density and high efficiency simultaneously. The designed and measured performance of transverse flux linear motor for maglev system revealed a great potential of system mass reduction.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.336-343
• /
• 2008

In this study, a transition of power quality was characterized by non-linear voltage electric equipments under voltage sag. The test was inputted voltage sag to IPC(Sag Generator) from AVR, and then to equipments by IPC which adjust voltage magnitude and duration. The load test which non-linear voltage electric equipments used PLC, Magnetic Contactor, SMPS, HID Lamp. The test result was different from each other according to a manufacturing companys, models, and equipments. PLC was greatly described to be stabilized voltage sag in case of no load then rated load. Magnetic Contactor was made a difference to phase angles on voltage sag, which was $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. HPD Lamp was described to be stabilized the sodium lamp, and to be unstabilized the metal hailed lamp. The test result was showed CBEMA curve that stand for evaluated responsiveness of voltage sag. This study was tested description to dynamic characteristics on non-linear voltage electric equipment under voltage sag. There was hoped that power system designed the essential particulars.

• Journal of Biosystems Engineering
• /
• 제34권5호
• /
• pp.325-330
• /
• 2009

This study was performed to develop accelerated life test methods for agricultural tractor transmission receiving variable load. To acquire parameters for calculation of accelerated life test, endurance tests were performed under different torque conditions. Test results showed that the shape factor of Weibull distribution was 1.5 and fatigue damage exponent was 5.4. The calculated test time was 5,877 hours under the conditions of average life (MTBF) 3,000 hours and 90% reliability for one test sample. According to the linear cumulative damage rule, test time could be reduced using increased test load. Test time could be reduced by 252 hours when 1.2 times of the rated load compared with 0.67 times of the rated equivalent load calculated by load spectrum of the agricultural tractor. Calculated acceleration coefficient was 23.3.

• 터널과지하공간
• /
• 제30권4호
• /
• pp.394-403
• /
• 2020

본 기술보고는 Pin-on-disk 마모시험에서 연속적인 등속도 아르키메데스 나선 경로 계산 방법에 관해 설명한다. 근사 계산된 등속도 아르키메데스 나선은 회전 중심 가까이에서 속도가 불안정하다. 따라서 본 기술보고에서는 등속도 조건을 만족시키기 위해 중공 단면을 가지는 시편을 사용하여 원점 부근에서 오프셋을 주었다. 또한, 내향형 나선과 외향형 나선을 연속적으로 연결하기 위해서 각각의 나선의 시작과 종료 지점 정보를 다음 차례의 나선에 반영하였다. 더불어, 시편의 치수과 마모시험 조건의 변화에 따라 등속도 나선 경로를 편리하게 계산하는 데 도움을 주고자 전용 계산 프로그램을 개발하였다.

• Computers and Concrete
• /
• 제23권1호
• /
• pp.11-23
• /
• 2019

Nowadays, the characterization of Ultra-High Performance Fiber-Reinforced Concrete (UHPFRC) tensile behavior still remains a challenge for researchers. For this purpose, a simplified closed-form non-linear hinge model based on the Third Point Bending Test (ThirdPBT) was developed by the authors. This model has been used as the basis of a simplified inverse analysis methodology to derive the tensile material properties from load-deflection response obtained from ThirdPBT experimental tests. In this paper, a non-linear finite element model (FEM) is presented with the objective of validate the closed-form non-linear hinge model. The state determination of the closed-form model is straightforward, which facilitates further inverse analysis methodologies to derive the tensile properties of UHPFRC. The accuracy of the closed-form non-linear hinge model is validated by a robust non-linear FEM analysis and a set of 15 Third-Point Bending tests with variable depths and a constant slenderness ratio of 4.5. The numerical validation shows excellent results in terms of load-deflection response, bending curvatures and average longitudinal strains when resorting to the discrete crack approach.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.156-161
• /
• 1993

Limiting distributions of Studentized test statistics have been shown for testing the slope parameter in a simple linear structural model. Since the limiting distribution of Studentized one appears to yield inaccurate inference, this paper suggests adjustment of critical value and normalization of the Studentized one. As results, we can have procedures for refined inference based on our approximate distrbution instead of the limiting distribution.

• Journal of the Korean Statistical Society
• /
• 제5권1호
• /
• pp.3-18
• /
• 1976

To test simultaneous significance of more than two linear regression coefficients, we can consider multivariate-t tests with critical regions in t-space instead of F-tests where t-values are t-statistics of significance tests of one coefficient. In this paper bivariate-t distributions and bivariate-t tests of two coefficients such as maxmod, minmod, one-tailed maxmod and one-tailed minmod tests are studied. Through the calculation of powers of test, it is learned that in some cases bivariate-t test are more powerful than F-tests.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.945-957
• /
• 2009

의약학 분야에서는 여러 집단에서 하나의 반복요인을 가지는 반복측정 자료가 많이 사용된다. 이 논문에서는 대조군과 처리군들의 시간에 따른 반응값의 선형추세를 비교하기 위하여 각 개체의 기울기를 추정하고 추정된 기울기들에 의해 생생된 표본으로 F-test, Jonckheere-Terpstra test, updated control group procedure를 이용하여 대조문과 처리군들의 차이를 검정하는 방법을 제안하였다. 모의실험 (Monte Carlo Simulation)을 통해 실험유의수준(experimental significance level)과 검정력(power)을 비교하였다.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.69-77
• /
• 2012

Relative density, used to express dynamics condition of sand quantitatively, is measured by RI Test, Standard Penetration Test and Cone Penetration Test. Each measurement method has demerits, which is complicated or needs a specific analysis instrument and an analysis of expert. Also the ground is in wet condition commonly because of an unsaturated zone between a saturated zone and a surface, so the behaviour of the ground has different engineering properties unlike the dry ground and it diminishes accuracy of measuring relative density. In this study, the correlation between relative density and penetration of fall cone test in dry condition and wet condition with variation of water content was analyzed and a simple measuring method for relative density was suggested. As a result, there were difference of penetration between dry sands and wet sands, the correlation between relative density and penetration showed linear expression and relative density could be measured by the linear relation.

• 한국ITS학회 논문지
• /
• 제16권2호
• /
• pp.73-82
• /
• 2017

회귀모형은 현실세계 모사를 위해 우리가 흔히 활용하고 있는 통계적 방법이다. 교통분야에서도 계획이나 공학부문에 활발하게 활용되고 있지만 여러 개의 모형이 구축될 경우 개별모형의 유의성 검증에 치중하여, 모형 간의 유사성을 검증하는 단계가 부재했다. 따라서 본 연구에서는 두 선형회귀모형 간의 유사성 확인을 위해 "차우(Chow) 검정"이라는 통계적 검정 방법을 적용하였다. 차우검정은 서로 다른 두 회귀모형에서 산출된 모수의 추정값을 근거로 하여, 두 모형 사이에 어떤 유사성이 존재하는지를 통계적으로 검증하는 기법으로 오래전부터 활용되고 있는 기법이다. 차우검정의 적용성을 확인하기 위해 우선, 우천시 주야간 고속도로 교통데이터를 수집하여 각각의 속도-밀도 회귀모형을 개발하였으며 차우검정을 통해 우천시 주야간 두 모형간의 유사성을 검증함으로써 이러한 통계적 절차가 객관적인 자료분석 과정에서 중요한 역할을 수행할 수 있음을 입증하였다. 본 연구에서는 선형회귀모형들에 대한 차우검정의 적용성을 확인해 보았으며, 향후 비선형 모형간의 유사성 검증 작업이 이어질 수 있을 것으로 기대한다.