• 호남수학학술지
• /
• 제41권3호
• /
• pp.505-514
• /
• 2019

In this paper, some results are obtained from studying convolution on the spectrum of full transformation semigroup and some of its subsemigroups using Cayley's table. The shift of ${\alpha}$ determines its eigenvalues and one-dimensional linear convolution is complex in Symmetric group.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.95-104
• /
• 2002

고강도 PSC 콘크리트 휨부재의 비선형 수치해석을 위해 적층법과 설계기준에 의한 비선형 모멘트 -곡률 관계의 계산방법이 제안되었다. 제안된 수치해석에 의한 모멘트-곡률 관계와 처짐계산을 위한 비선형 수치해석 과정에 의한 계산결과는 해석적인 방법에 의한 모멘트-곡률 관계 그리고 기존의 고강도 PSC 콘크리트 휨부재에 대한 실험결과와 비교되었다. 이 논문의 적층법에 의한 에너지흡수율은 강도설계법과 CEB-FIP 제안식보다 약 30%크게 계산되었다. 적층법에 의한 극한하중과 외부일은 각각 실험결과의 92%와 85%로 안전하게 계산되었으며, 강도설계법은 97%와 122%로 극한하중에 대해서는 안전하나 외부일은 과대 평가되었다. CEB-FIP 제안식은 극한하중과 외부일에서 실험결과의 113% 와 173%로 고강도 콘크리트에 대한 극한변형률 0.0035의 적용에 문제가 있었다 제안된 비선형 수치해석 과정은 고강도 PS 콘크리트 휨부재의 거동을 극한상태까지 안정적으로 해석할 수 있었으며, 극한하중의 80%가지 하중-처짐 관계와 균열의 전파정도의 계산결과는 실험결과와 유사하였다

• 디지털융복합연구
• /
• 제17권10호
• /
• pp.509-518
• /
• 2019

본 연구는 중학생의 사회적 관계가 학교생활적응에 미치는 영향을 파악하고, 사회적 관계와 학교생활적응 간의 관계에서 스트레스 대처방식 요인의 매개효과를 검증하고자 수행되었다. 본 연구는 한국청소년정책연구원의 '청소년 역량지수 측정 및 국제비교 연구III(2016)'의 횡단 조사 데이터를 활용하여 중학생 총 3,406명을 대상으로 분석을 실시하였다. 본 연구에서는 주요 변수에 대한 신뢰도 분석, 상관관계 분석, 중다회귀분석을 실시하였다. 주요 연구 결과는 다음과 같다. 첫째, 중학생의 사회적 관계는 학교생활적응에 유의미한 영향을 주는 요인으로 검정되었다. 둘째, 중학생의 사회적 관계가 스트레스 대처방식에 정적인 영향을 주는 것으로 확인되었다. 셋째, 중학생의 스트레스 대처방식은 학교생활적응에 유의한 영향을 미치는 것으로 검정되었다. 마지막으로, 청소년의 사회적 관계가 학교생활적응에 미치는 경로에서 스트레스 대처방식의 부분매개효과를 검정하였다. 이러한 결과에 근거하여 청소년의 학교생활적응 및 사회적 관계와 스트레스 대처방식을 향상시키는 방안을 제시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.239-246
• /
• 2000

It has been generally much fine contents in West Coast of Korea. When cyclic shear stress causing liquefaction was estimated as using cyclic triaxial tests in these grounds, it didn't appear linear relations between deviator stress and confining stress where σ'₃ was more than 150 kpa. Namely, due to no normalization of cyclic shear stress ratio, the errors of this is increased. Therefore, more confining stress is increased, more increment of deviator stress is decreased. So, using linear relations between tanø'/sub d/ of dynamic internal friction angle and CSR where σ'₃ was less than 150 kpa, liquefaction of these grounds was evaluated. Also, as doing detail evaluation which had carried response analysis of earthquake, this appeared good results which was well compatible with empirical methods using N-value of SPT. It was thought that these result evaluated vulnerable liquefaction area more correct than existing methods. Also, characteristics of liquefaction in West Coast grounds was compared with clean sands, with analysis of behavior of pore pressure ratio and axial strain affected by fine contents, as cyclic loading was applied.

• The Journal of Asian Finance, Economics and Business
• /
• 제5권3호
• /
• pp.43-50
• /
• 2018

The paper aims to investigate the impact of trade cost on export: A Case Study Vietnam. The study conducts a static linear panel data analysis on annual data covering bilateral export between Vietnam and 70 major importers of Vietnam from 2001 to 2013. The gravity model has been one of the most successful applications in empirical trade. In this paper we apply the gravity model to estimate the impact of trade cost on Vietnamese bilateral export value. The paper uses gravity model to estimate the impact of trade cost on Vietnamese bilateral export value. The empirical results derive from a static linear panel data analysis (fixed effects model) indicates that trade cost plays a crucial role in determining the export value that occurs between Vietnam and trading partners. Besides, population of importing country, trade openness of importing country, gross domestic product of importing country and gross domestic product of Vietnam are also significant determinants of Vietnamese bilateral export value. The main findings indicates that trade cost plays a very important role in the Vietnamese bilateral export performance. This suggests that the Vietnamese government should attempt to improve domestic trade costs to enhance competitiveness and increase export growth sustainably.

• 천문학회보
• /
• 제35권2호
• /
• pp.27.1-27.1
• /
• 2010

Globular cluster (GC) systems in most galaxies, particularly in ellipticals, show bimodal color distributions. Because broadband colors trace metallicity at old ages, this phenomenon has been commonly interpreted as bimodal metallicity distributions, implying the presence of two sub-populations in the globular cluster system within a galaxy. However, a new explanation has recently been proposed, in which the non-linear nature of color-metallicity relations induced by horizontal-branch stars can produce bimodal color distributions even from unimodal metallicity distributions. In this study, we put these two explanations to the test on the origin of color bimodality, using multi-band (U,B,V and I) photometry of globular clusters in NGC 1399, the central giant elliptical galaxy in Fornax galaxy cluster. We find significant changes in the morphology of color distributions when using different colors. The observation is also well reproduced by the Monte Carlo realization of GC color when a unimodal metallicity distribution and the theoretical non-linear color-metallicity relations are assumed. We discuss the implications regarding theories on galaxy formation and evolution.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.155-181
• /
• 2016

In the present paper we discuss the stability and the post-buckling behaviour of thin piezoelastic plates. The first part of the paper is concerned with the modelling of such plates. We discuss the constitutive modelling, starting with the three-dimensional constitutive relations within Voigt's linearized theory of piezoelasticity. Assuming a plane state of stress and a linear distribution of the strains with respect to the thickness of the thin plate, two-dimensional constitutive relations are obtained. The specific form of the linear thickness distribution of the strain is first derived within a fully geometrically nonlinear formulation, for which a Finite Element implementation is introduced. Then, a simplified theory based on the von Karman and Tsien kinematic assumption and the Berger approximation is introduced for simply supported plates with polygonal planform. The governing equations of this theory are solved using a Galerkin procedure and cast into a non-dimensional formulation. In the second part of the paper we discuss the stability and the post-buckling behaviour for single term and multi term solutions of the non-dimensional equations. Finally, numerical results are presented using the Finite Element implementation for the fully geometrically nonlinear theory. The results from the simplified von Karman and Tsien theory are then verified by a comparison with the numerical solutions.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.159-159
• /
• 1999

Application of the macro layer dryout model has been performed to predict CHF at inclined plates. For the identification of the detachment frequency of coalesced bubble, experiments have been performed with high-speed motion analyzer and bubble behaviors at inclined plates have been investigated. Based on the observed bubble behaviors, the detachment frequency of the coalesced bubble is measured and linear relations between detachment frequency and heat flux have been developed. In the case of 60$^{\circ}$ and 90$^{\circ}$ inclined plate, the detachment frequency decreases with the increase of heat flux. However, opposite trend has been identified in $30^{\circ}$ in-clined plate: the detachment frequency increases with the increase of heat flux. Using the cor- relation of macro layer thickness suggested by Haramura & Katto and the extrapolation of the identified linear relations, CHFs at different conditions have been predicted. According to the prediction results, CHF values are well predictable.

• 호남수학학술지
• /
• 제43권2호
• /
• pp.183-197
• /
• 2021

Recently several authors have extended the Beta function by using its integral representation. However, in many cases no expression of these extended functions in terms of classic special functions is known. In the present paper, we introduce a further extension by defining a family of functions G_r,s : ℝ^*₊ → ℂ, with r, s ∈ ℂ and ℜ(r) > 0. For given r, s, we prove that this function satisfies a second-order linear differential equation with rational coefficients. Solving this ODE, we express G_r,s as a combination of confluent hypergeometric functions. From this we deduce a new integral relation satisfied by Tricomi's function. We then investigate additional specific properties of G_r,1 which take the form of new non trivial integral relations involving exponential and error functions. We discuss the connection between G_r,1 and Stokes' first problem (or Rayleigh problem) in fluid mechanics which consists in determining the flow created by the movement of an infinitely long plate. For $r{\in}{\frac{1}{2}}{\mathbb{N}}^*$, we find additional relations between G_r,1 and Hermite polynomials. In view of these results, we believe the family of extended beta functions G_r,s will find further applications in two directions: (i) for improving our knowledge of confluent hypergeometric functions and Tricomi's function, (ii) and for engineering and physics problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1883-1887
• /
• 1991

Identification theory for linear discrete system has been presented by a great many reference, but research works for identification of continuous-time system are less than preceding identification. In fact, a great man), systems for engineering are continuous-time systems, hence, research for identification of continuous-time system has important meaning. This paper offers the following results: 1. Corresponding relations for the parameters of continuous-time model and discrete model may be shown, when single input-output system has general characteristic roots. 2. To do identification of single variable continuity linear system with stability constraints from samples of input-output data, it is necessary to use optimization with stability constraints. 3. Main results of this paper may be explained by a simple example.