• 한국식품영양과학회지
• /
• 제21권2호
• /
• pp.213-218
• /
• 1992

식품의 동결중에 생성되는 빙결정의 크기에 미치는 동결조건의 영향을 조사하고 그 관계를 정량적으로 평가함과 아울러 동결조건과 빙결정 분산구조와의 관계를 이론해석에 의해 조사한 결과, 1. 동결이동속도 u는 생성빙결정의 평균경 d$_{p}$와 u .d$_{p}$/D~constant의 관계에 있음을 간단한 차원해석에 의해 예측이 가능하였다. 2. 2% 한천 겔, 5%한천 겔, 20% 젤라틴 겔, 돈육의 순서로 동결점에 도달하는 시간이 빨라지며 동결시간 및 최대빙결품 생성대의 통과시간은 냉매온도와 선형적인 관계를 나타내었다. 3. 대두 단백질 겔중에 생성되는 빙결정의 평균경 d$_{p}$와 동결계면 이동속도 u 는 반비례 관계를 나타내었으며, 이로부터 구해진 u .d$_{p}$의 값은 3.4$\times$$10^{-6}$ $\textrm{cm}^2$/sec로 예측 이론식이 유효한 것으로 사료되었다. 4. 동결보존중의 대두 단백질 겔 내부에 생성된 빙결정의 성장에 미치는 보존온도의 영향을 조사한 결과, 양자가 빙결정의 성장에 미치는 영향은 거의 없는 것으로 나타났다. 5. 동결조건과 동결계면구조와의 사이에 Moving velocity of freezing front= (Mass transfer rate of water at freezing front)$\times$ (Surface area of freezing front) 의 관계를 나타내었다.

• 지질공학
• /
• 제27권4호
• /
• pp.367-376
• /
• 2017

최근 전 세계적으로 해저터널 건설이 활발하게 진행되고 있으며, 국내에서도 본토와 제주도를 연결하기 위한 해저터널 건설에 관심이 집중되고 있다. 해저터널의 안전한 건설을 위해서는 설계 및 시공 단계에서 단층과 같은 지질구조의 파악이 매우 중요하다. 그러나 해저터널의 경우 육상터널과는 다르게 지반조사의 한계로 인하여 지질구조의 분포에 대한 정보를 취득하는데 어려움이 있다. 본 연구의 목적은 지구통계학적 방법을 이용하여 해저지반에 발달하는 대규모 지질구조를 자동으로 도출하는 알고리즘을 개발하는 것이다. 본 연구에서 가장 중요한 것은 최적 이동창의 크기, 최적 공간통계량 종류, 최적 백분위수 기준의 결정이다. 최종적으로 도출된 최적 분석 알고리즘으로 R을 이용하여 사용자 프로그램을 개발하였다. 개발한 프로그램은 다양한 공간통계량의 변화를 쉽게 파악할 수 있도록 하였다. 또한, 공간통계량의 종류와 백분위 기준을 손쉽게 지정할 수 있도록 하여 공간통계량의 변화에 따른 지질구조 분석을 용이하게 하였다. 따라서, 지질구조선 도출 알고리즘에서 공간통계량은 이동 분산값, 분위수 기준은 상위 10%, 이동창의 크기는 $3{\times}3$ 일 때 대규모 지질구조선의 선형적인 형태가 시각적으로 가장 잘 나타나는 것을 확인할 수 있다. 특히 분위수 기준을 상위 0.5%로 할 경우 등고선 그림에서 오류값들이 거의 제거가 되는 양상을 보여준다.

• 대한전자공학회논문지TC
• /
• 제39권8호
• /
• pp.14-25
• /
• 2002

본 논문에서는 제 3 세대 이동 통신인 WCDMA 기지국 모뎀의 실제 구현에 적합하도록 변형된 AFC(Automatic Frequency Control) 루프를 제안한다. 제안된 AFC 루프에는 구현상의 복잡도 감소를 위하여 기존의 CP-FDD(Cross Product Frequency Difference Detector) 알고리즘을 변형한 Normalized CP-FDD 알고리즘을 적용하였다. 제안된 Normalized CP-FDD는 입력 신호 진폭 변화에 민감한 기존 CP-FDD 출력 특성을 보완하며, FDD의 출력(S-curve)의 선형화 구간을 증가시킴으로써 안정적인 주파수 오차에 대한 추정을 가능하게 한다. WCDMA에서는 IS-95 시스템과 다르게 파일롯 심볼이 연속적으로 전송되지 않으므로, FDD 입력단에 이동 평균 필터(Moving Average Filter)를 도입하여 교차곱(Cross-product)의 수를 증가시킴으로써 잡음의 영향을 감소시키고 주파수 오차에 대한 추적 시간 성능과 안정성을 향상시켰다. 또한 다단 추적 모드를 적용함으로써 수신 신호의 주파수 오차의 크기에 대한 능동적인 보상이 가능하도록 하였으며, 루프 필터의 출력을 이용한 ROM table 도약 구조의 NCO(Numerical Controled Oscillator)를 적용하여 주파수 오차를 보상하였다. 본 논문에서 제안한 알고리즘은 WCDMA 기지국 모뎀 구현에서 성공적으로 적용되었다.

• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.335-342
• /
• 2014

This paper describes the forming conditions of smart-phone curved glass using the glass molding system with force applying system. The force applying system is composed of a body, a motor and gear, a rectilinear movement structure, a force sensor, a LVDT sensor (Linear Variable Differential Transformer), a up and down moving block, and so on. The glass molding system for characteristic test to find the forming conditions consists of the force applying system and a chamber, a metallic mold, a upper heater, a lower heater and so on. The characteristic test for forming conditions of smart-phone curved glass was carried out at forming temperature $620^{\circ}C$ and $650^{\circ}C$ using the glass molding system. As a result of the characteristic test, the forming conditions of curved glass could be found, and it is thought that the conditions can be used to apply to the system for producing in large quantities.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.130-136
• /
• 2005

This paper presents an optimal design and the performance evaluation of two-axis nano positioning stage with round notched flexure hinges. A flexure hinge mechanism with round notched flexure hinges is to guide the linear motions of a moving plate in the nano positioning stage. A Min-Max algorithm is applied to the design of the flexure hinge mechanism for nano positioning stage. In the design process, the structure of the flexure hinge mechanism is fixed, then the radius of a round hole and the width of two round holes are chosen as design variables, and finally the do sign variables are calculated by the Min-Max algorithm. The machined flexure hinge mechanism, stack type PZTs for actuation and capacitance type displacement sensors for position measurement are assembled into the nano positioning stage. The experimental results of the manufactured nano positioning stage show the first modal resonance frequency of 197 Hz, the operating range of 40 um, and the resolution of 3 nm.

• Wind and Structures
• /
• 제20권2호
• /
• pp.315-326
• /
• 2015

To overcome the drawbacks of the traditional contact-type sensor for structural displacement measurement, the vision-based technology with the aid of the digital image processing algorithm has received increasing concerns from the community of structural health monitoring (SHM). The advanced vision-based system has been widely used to measure the structural displacement of civil engineering structures due to its overwhelming merits of non-contact, long-distance, and high-resolution. However, seldom currently-available vision-based systems are capable of realizing the synchronous structural displacement measurement for multiple points on the investigated structure. In this paper, the method for vision-based multi-point structural displacement measurement is presented. A series of moving loading experiments on a scale arch bridge model are carried out to validate the accuracy and reliability of the vision-based system for multi-point structural displacement measurement. The structural displacements of five points on the bridge deck are measured by the vision-based system and compared with those obtained by the linear variable differential transformer (LVDT). The comparative study demonstrates that the vision-based system is deemed to be an effective and reliable means for multi-point structural displacement measurement.

• 한국실내디자인학회논문집
• /
• 제19권1호
• /
• pp.75-84
• /
• 2010

This study will establish the transformal characteristics of architectural visual information by investigating: how contemporary architects perceive and process multifaceted architectural information via the expression media since 1970s. The purposes and results of this study are summarized as follows: This study established the contemporary transformal characteristics by comparing the expression methods of traditional architects with the transformal characteristics of visual information derived from the contemporary architectural expression media. In a pluralistic information society, the expression methods of the past, which recognize space as a stationary, unidimensional visual point on a drawing surface, is now changing to the mixed, multidimensional expression methods that connect various visual points on a limited drawing surface. Furthermore, the rapid advancement of digital media is changing, from a method which simply arranges visual information, to a flexible visual tool which can process architecture sequentially and simultaneously. As the communication structure of architecture is moving toward an individual-centered two-way communication type, the information delivery method is used to visualize conceptual, inferential information, rather than visualizing realistic information which simply records facts. In the past, multidimensional, non-linear forms could not be processed by the conventional design processes and sketch work, but now they can be expressed via digital media.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.570-577
• /
• 2014

This paper describes the design of a force applying system for a smart phone curved glass molding system and its characteristic test. The force applying system is composed of a motor and gear, a rectilinear movement structure, a force sensor, an LVDT (Linear Variable Differential Transformer) sensor, an up and down moving block, and so on. The system precisely controls the applying force and time to the plane glass because the glass can be easily destroyed under applied force, and can be bent imperfectly. As a result of the characteristic test, the curved glass can be manufactured using this system, and the holding time under 0N force, the applying force to the plane glass, the time for applying from 0N to maximum force, and the holding time under maximum force at the manufacture feasible temperature $620^{\circ}C$ were found.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.17-17
• /
• 1998

Synchrotron radiation is produced when charged particles moving with relativistic velocities a are accelerated - for example, deflected by the bending magnets which guide the electron or p positrons in circular accelerators or storage rings. By using special focusing magnetic lattices i in the particle accelerators it is possible to make the dimensions of the particle beam very small with a hi맹 charge density which results in a light source with high b디lIiance. Synchrotron light h has important properties which make it ideal for a wide range of investigations in surface s science. The fact that the spectrum of electromagnetic radiation emitted in a bending magnet e extends in a continuum from the 얹r infra red region to hard x-rays means that it is id않I for a v variety of spectroscopic studies. Since there are no convenient lasers, or other really bright l light sources, in the vacuum ultraviolet and soft x-ray re.밍ons the development of synchrotron r radiation has enabled enormous advances to be made in this di펌C비t spectr따 re밍on. P Polarization-dependent measurements, for ex없nple ellipsometry or circular dichroism studies a are possible because the radiation has a well-defined polarization - linear in the plane of orbit w with additional right-circular, or left-circular, components for emission an생es above, or below, t the horizontal, respectively. Since the synchrotron light is emitted from a bunch of charge c circulating in a ring the light is emitted with a well-defined time structure with a short flash of l light every time a bunch passes an exit port. The time structure depends on the size of the ring a and the number and sequence of filling of the bunches. A pulsed light source enables time¬r resolved studies to be performed which provide direct information on the lifetimes and decay m modes of excited states and in addition opens up the possibility of using time of flight t techniques for spectroscopic studies. The fact that synchrotron radiation is produced in a clean u ultrahi야 vacuum environment is of gr않t importance for surce science studies. The current t비rd generation synchrotron light sources provide exceptionally high baliance and stability a and open up possibilities for experiments which would have been inconceivable only a short time ago.

• 천문학회지
• /
• 제48권4호
• /
• pp.213-228
• /
• 2015

The Horizon Run 4 is a cosmological N-body simulation designed for the study of coupled evolution between galaxies and large-scale structures of the Universe, and for the test of galaxy formation models. Using 6300³ gravitating particles in a cubic box of L_box = 3150 h⁻¹Mpc, we build a dense forest of halo merger trees to trace the halo merger history with a halo mass resolution scale down to M_s = 2.7 × 10¹¹h⁻¹M_⊙. We build a set of particle and halo data, which can serve as testbeds for comparison of cosmological models and gravitational theories with observations. We find that the FoF halo mass function shows a substantial deviation from the universal form with tangible redshift evolution of amplitude and shape. At higher redshifts, the amplitude of the mass function is lower, and the functional form is shifted toward larger values of ln(1/σ). We also find that the baryonic acoustic oscillation feature in the two-point correlation function of mock galaxies becomes broader with a peak position moving to smaller scales and the peak amplitude decreasing for increasing directional cosine μ compared to the linear predictions. From the halo merger trees built from halo data at 75 redshifts, we measure the half-mass epoch of halos and find that less massive halos tend to reach half of their current mass at higher redshifts. Simulation outputs including snapshot data, past lightcone space data, and halo merger data are available at http://sdss.kias.re.kr/astro/Horizon-Run4.