• 전기학회논문지
• /
• 제59권1호
• /
• pp.176-183
• /
• 2010

This paper presents some practical design issues that should be carefully considered when a notch filter is included in a linear feedback controller. A notch filter is generally used to compensate the effects of resonant modes that may result in poor performance. It is very common that the practical engineers prefer to add such a notch filter after having previously designed a feedback controller without the filter. It is known that the resulting performance by this approach is not seriously different from when a feedback controller is designed for a plant previously compensated by a notch filter. However, we will point out that there are some cases where both approaches have different performances. In order to show this, a low-order controller design using the partial model matching method has been applied to a linear time invariant (L Tn model. The results suggest that there is a tendency to achieve much better time responses in terms of reducing the overshoot and shortening the settling time, and in the frequency domain characteristics such as the sensitivity function and the stability margins when the design of a feedback controller after including a notch filter is carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1-4
• /
• 1996

It is difficult that a non-translational motion in a block is estimated by the block matching algorithm (BMA). In this paper, a nodal-displacement-based deformation model is used for this reason. This model assumes that a selected number of control nodes move freely in a block and that displacement of any interior point can be interpolated from nodal displacements. As a special case with a single node this model is equivalent to a translational model. And this model can represent more complex deformation using more nodes. We used an iterative gradient based search algorithm to estimate nodal displacement. Each iteration involves the solution of a simple linear equation. This method is called the deformable block matching algorithm (DBMA).

• 노동경제논집
• /
• 제34권2호
• /
• pp.53-77
• /
• 2011

최근 정규직과 비정규직 간의 고용형태 차이에 관한 연구, 특히 임금격차에 관한 연구가 활발하게 이루어지고 있다. 본 논문은 기존 연구에서 고용형태별 임금격차를 추정하기 위해 선형회귀 방법 등을 활용할 때 발생할 수 있는 추정의 문제점을 해결하기 위한 대안으로 데이터 매칭(matching)이라는 새로운 방법을 제시하고자 한다. 비정규직 근로자와 동일한 특성을 지닌 것으로 보이는 정규직 근로자를 매치하여 양자의 임금격차를 분석한 결과, 정규직과 비정규직의 임금 차이는 거의 존재하지 않음을 알 수 있다.

• 한국통신학회논문지
• /
• 제36권10B호
• /
• pp.1210-1215
• /
• 2011

이 논문에서는 다중경로 특성과 충격성 잡음이 있는 수중 통신 채널에 대해 확률밀도함수 정합 방법에 근거한 적응등화 알고리듬을 소개하고 결정 궤환을 적용한 확률밀도함수 정함 알고리듬을 제안하였다. 기존의 제곱평균오차 기반의 최소평균제곱 (LMS) 알고리듬은 수중통신 채널의 충격성 잡음과 다중경로 채널을 보상하지 못하는 현상을 보였다. 충격성 잡음에 효과적인 면역성을 보인 선형 확률밀도함수 정합 알고리듬도 열악한 다중경로 환경에서는 만족스럽지 못한 성능을 나타났다. 한편, 제안한 결정 궤환 구조의 비선형 확률밀도함수 정합 알고리듬은 수중 통신 채널의 다중경로 특성과 충격성 잡음에 대해 탁월한 강인성을 가짐을 모의실험을 통해 입증되었다.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.420-424
• /
• 1987

The model reduction methods of the linear time invariant continuous systems are proposed. The energy dispersion method is used to obtain the model denominator. And the model numerator is found by the modified residue method or the time moment matching method. The methods suggested are compared with the method suggested by Lucas and give good results.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1620-1627
• /
• 2017

In this paper, we design an observer-based $H_{\infty}$ fuzzy controller for interval type-2 Takagi-Sugeno (T-S) fuzzy systems under imperfect premise matching. The designed observer-based controller can effectively estimate the state of the system and make fuzzy system satisfy the $H_{\infty}$ disturbance attenuation performance. Using the slack matrix, the derived stabilization condition is expressed in terms of a linear matrix inequality. Finally, the effectiveness of the proposed method is verified through a simulation example.

• 제어로봇시스템학회논문지
• /
• 제13권9호
• /
• pp.851-855
• /
• 2007

This paper deals with the problem of designing a linear sliding surface design for a class of uncertain systems with mismatched unstructured uncertainties. The uncertain system under consideration may have mismatched parameter uncertainties in the state matrix as well as in the input matrix. In terms of linear matrix inequalities (LMIs), we give a sufficient condition for the existence of linear sliding surfaces guaranteeing the asymptotic stability of the sliding mode dynamics. We show that our LMI condition can be less conservative than the existing conditions and our result supplement the existing results. Finally, we give a numerical example showing that our method can be better than the previous results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.560-564
• /
• 1996

A mixed H$^{2}$/$H^{\infty}$ controller design method for linear systems with time delay in all variables and parameter uncertainties in all system matrices is proposed. Robust $H^{\infty}$ performance and H$^{2}$ performance condition that accounts for model-matching of closed loop system and disturbance rejection is also derived. With expressing uncertain system with linear fractional transformation form, we transform the robust stability and performance problem to the H$^{2}$/$H^{\infty}$ optimization problem and design a mixed H$^{2}$/$H^{\infty}$ controller. Using the proposed method, mixed H$^{2}$/$H^{\infty}$ controller for underwater vehicle with time delay and parameter variations are designed. Simulations of a design example with hydrodynamic parameter variations and disturbance are presented to demonstrate the achievement of good robust performance.t performance.ance.

• ETRI Journal
• /
• 제31권6호
• /
• pp.806-808
• /
• 2009

A new computationally efficient algorithm-based propagator method for two-dimensional (2-D) direction-of-arrival (DOA) estimation is proposed, which uses two parallel uniform linear arrays. The algorithm takes advantage of the special structure of the array which enables 2-D DOA estimation without pair matching. Simulation results show that the proposed algorithm achieves very accurate estimation at a computational cost 4 dB lower than that of standard methods.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.587-597
• /
• 2007

본 연구는 IKONOS Geo레벨 스테레오 영상으로부터 DEM을 제작하기 위한 토지피복 특성별 정합영역 크기를 결정하고자 한다. 사용된 매칭기법은 상관계수를 이용한 영역기반정합 기법을 적용하였고, 탐색영역을 최소화하기 위해 외부표정요소를 구한 후, 이로부터 정합선을 수립하여 정합하였다. 실험은 산림, 논 밭, 수계, 도심지의 4가지 토지피복 특성별로 수행되어졌으며, 토지피복별 평균 상관계수, 칼럼 라인의 시차영상을 분석한 후, 실험 영상에서 최적의 정합영역 크기를 선정하였다. 실험결과, 산림지역은 $119{\times}119$화소, 논 밭 지역은 $51{\times}51$화소, 물 지역은 $81{\times}81$화소, 도심지는 $21{\times}21$화소가 DEM 제작을 위한 가장 적절한 정합영역 크기로 선정되었다.