• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.197-205
• /
• 2010

This study examines for the processes of making a architectural significant issue of 20 cases form of Beijjng's hotel through analyzing the space composition from early the 1950's to 1992 in China. In the methods of analyzing process, We study the literatures, research reports and architectural drawings including the site survey. We hope to establish the principle in morphological characteristics and space composition of Beijing's high-rise hotels through analyzing the plan of these hotels. Finally, We find out the principles after researching. Firstly, Beijing's hotels in China faced on the being difficulties through the process of national development especially in political and economical conditions of country and peoples. Consequently, size of the Beijing's hotel developed with the fact that is complicated from that is single styles focused on the medium-sized one, modernizing popularity and the high-rise hotel buildings appeared plentifully and the form appeared with tall building putting first. Secondly, there are many immanent and interlocking styles in hotel's architectural block plans, many composition styles in big sized hotels, in opposition immanent styles in small sized ones and there are many trend of concourse style in medium sized hotels. To the layout of hotel's room inside of the linear styles are many in big and medium sized hotels.

• Journal of Navigation and Port Research
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2020

The purpose of this study was to investigate user satisfaction by identifying the problems and suggesting Improvement plans of interior design in the accommodation area of Ro-Pax ships. First, the characteristics of Ro-P ax ships' accommodation area through previous studies and references, and then a field survey was conducted on seven kinds of Ro-Pax ships. Based on the field study, a questionnaire survey was administered targeting 38 experts involved in passenger ships who indicated that public facilities were the most unsatisfactory of interior design in accommodation areas. As a result of Multiple Linear Regression Analysis, the satisfaction of color showed the highest influence on user satisfaction in accommodation areas, and required the standard of the interior design in accommodation areas. The suggested results of research were the types and layout of public facilities, improvement of color design, provision of interior design standard for accommodation areas, and improvement plans for interior design of Ro-Pax ships.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.335-344
• /
• 2011

A curvilinear non-hydrostatic free surface model is developed to investigate nonlinear wave interactions in a circular channel. The proposed model solves the unsteady Navier-Stokes equations in a three-dimensional domain with a pressure correction method, which is one of fractional step methods. A hybrid staggered-grid layout in the vertical direction is implemented, which renders relatively simple resulting pressure equation as well as free surface closure. Numerical accuracy with respect to wave nonlinearity is tested against the fifth-order Stokes solution in a two-dimensional numerical wave tank. Numerical applications center on the evolution of nonlinear waves including diffraction and reflection affected by the curvature of side wall in a circular channel comparing with linear waves. Except for a highly nonlinear bichrmatic wave, the model's results are in good agreement with superimposed analytical solution that neglects nonlinear effects. Through the numerical simulation of the highly nonlinear bichramatic wave, the model shows its capability to investigate the evolution of nonlinear wave groups in a circular channel.

• Journal of Environmental Science International
• /
• v.27 no.2
• /
• pp.123-133
• /
• 2018

The historical exchanges between the Republic of Korea and Japan have broadly occurred, in terms of both political and cultural aspects, from ancient to modern times. Regarding ancient gardening culture, in particular, Asuka developed gardens with the gardening techniques passed down by the Baekje people. The development of the basic form of a garden pond along with its characteristics, established through such exchanges, is suggested by investigating its components through analysis of data from the gardens of Baekje and Asuka. In terms of the garden pond structure, homogeneity was confirmed between Baekje and Asuka, with a linear rectangular form as the basic design. In addition, the vertical construction technique was used by both ancient kingdoms. In terms of the types of stone used in building the shore of the garden pond, Baekje used diverse types such as natural stone, crushed stone, and cut stone. In contrast, rounded river stone was used by Asuka. Regarding the floor of the garden pond, Baekje used soil, which enabled the planting of lotus flowers. In contrast, Asuka used stones to pave pond floors, which made the growth of plants impossible. In terms of layout, Baekje used ornamental stones for pond landscaping, while Asuka used manmade island and water intake facilities in their pond construction. The effects of Baekje's garden culture on Asuka's garden building can be seen from its influence on the form of the garden pond and shore construction style. In terms of the construction of the garden pond's shore with the same stones and the stone flooring, the garden ponds of the Asuka Kingdom reveal technically unified and refined aspects.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.199-207
• /
• 2011

A Ku-band low noise amplifier has been designed and fabricated by using 0.25 um SiGe BiCMOS process. The developed Ku-band LNA RFIC which has been designed with hetero-junction bipolar transistor(HBT) in the BiCMOS process have noise figure about 2.0 dB and linear gain over 19 dB in the frequency range from 9 GHz to 14 GHz. Optimization technique for p-tap value and electro-magnetic(EM) simulation technique had been used to overcome the inaccuracy in the PDK provided from the foundry service company and to supply the insufficient inductor library. The finally fabricated low noise amplifier of two fabrication runs has been implemented with the size of $0.65\;mm{\times}0.55\;mm$. The pure amplifier circuit layout with the reduced size of $0.4\;mm{\times}0.4\;mm$ without the input and output RF pads and DC bais pads has been incorporated as low noise amplication stages in the multi-function RFIC for the active phased array antenna of Ku-band satellite VSAT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.287-295
• /
• 2010

In this paper, we introduce a novel approach to optimization algorithm which is a distributed Mean field Genetic algorithm (MGA) implemented in MPI(Message Passing Interface) environments. Distributed MGA is a hybrid algorithm of Mean Field Annealing(MFA) and Simulated annealing-like Genetic Algorithm(SGA). The proposed distributed MGA combines the benefit of rapid convergence property of MFA and the effective genetic operations of SGA. The proposed distributed MGA is applied to the channel routing problem, which is an important issue in the automatic layout design of VLSI circuits. Our experimental results show that the composition of heuristic methods improves the performance over GA alone in terms of mean execution time. It is also proved that the proposed distributed algorithm maintains the convergence properties of sequential algorithm while it achieves almost linear speedup as the problem size increases.

• Smart Structures and Systems
• /
• v.18 no.3
• /
• pp.405-423
• /
• 2016

In this study, the feasibility of using telecommunication single-mode optical fiber (SMF) as a distributed fiber optic strain and crack sensor was evaluated in concrete pavement monitoring. Tensile tests on various sensors indicated that the $SMF-28e^+$ fiber revealed linear elastic behavior to rupture at approximately 26 N load and 2.6% strain. Six full-scale concrete panels were prepared and tested under truck and three-point loads to quantify the performance of sensors with pulse pre-pump Brillouin optical time domain analysis (PPP-BOTDA). The sensors were protected by precast mortar from brutal action during concrete casting. Once air-cured for 2 hours after initial setting, half a mortar cylinder of 12 mm in diameter ensured that the protected sensors remained functional during and after concrete casting. The strains measured from PPP-BOTDA with a sensitivity coefficient of $5.43{\times}10^{-5}GHz/{\mu}{\varepsilon}$ were validated locally by commercial fiber Bragg grating (FBG) sensors. Unlike the point FBG sensors, the distributed PPP-BOTDA sensors can be utilized to effectively locate multiple cracks. Depending on their layout, the distributed sensors can provide one- or two-dimensional strain fields in pavement panels. The width of both micro and major cracks can be linearly related to the peak strain directly measured with the distributed fiber optic sensor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1235-1242
• /
• 2008

In this paper, x-ray image sensor of photon counting type having a $32{\times}32$ pixel array is designed with $0.18{\mu}m$ triple-well CMOS process. Each pixel of the designed image sensor has an area of loot $100{\times}100\;{\mu}m2$ and is composed of about 400 transistors. It has an open pad of an area of $50{\times}50{\mu}m2$ of CSA(charge Sensitive Amplifier) with x-ray detector through a bump bonding. To reduce layout size, self-biased folded cascode CMOS OP amp is used instead of folded cascode OP amp with voltage bias circuit at each single-pixel CSA, and 15-bit LFSR(Linear Feedback Shift Register) counter clock generator is proposed to remove short pulse which occurs from the clock before and after it enters the counting mode. And it is designed that sensor data can be read out of the sensor column by column using a column address decoder to reduce the maximum current of the CMOS x-ray image sensor in the readout mode.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.2
• /
• pp.10-16
• /
• 2000

The purpose of this study is to identify relationships between a central angle and a radius of curvature of divided roads in flat terrain of traditional villages, suggesting layout criteria for traditional villages: Nak-an, Sung-Eup, Ha-Whe. This study is sought to find the optimum model through the various SAS regression analyses. a regression analysis of this data was adopted to induce the relationship formula between a central angle of curve and a radius of curvature. Results of this study are as follows: 1) Most of the divided roads in traditional villages have a complex curve rather than a simple curve. 2) A central angle of curve has ranged from 11$^{\circ}$to 127$^{\circ}$, with a mean degree of 63.9. 3) In the lower level of central angle(11-40$^{\circ}$), the branch roads have distributed with a high frequency, but with a low frequency in the higher level of central angle(90-140$^{\circ}$). 4) A radius of curvature in the divided roads has ranged from 0.9m to 59.6, but half of the roads have concentrated on 1-6m of the curvature. 5) Compared to the result of hilly villages in previous study(Ahn, 1999), value of central angels in flat villages is lower than that of hilly villages, while a mean value of the curvature is higher than that of hilly villages. 6) A Non-linear regression analysis, resulting from the SAS application, was useful method to induce a relationship formula between a central angle and a radius of curvature in the branch roads. Our study's formula is as follow: R=100.3*EXP(-0.06*$\delta$)+3.91. 7) Our study model has less error than that of the Kishizuka's method, being applicable to a broader range of the branch roads. 8) A minimum radius of curvature in our study has showed 3.9m, suggesting to reconsider applications of the Kishizuka's(5.8m) in the footpass design, In the study for this presupposition model the efficiency and utility of it can be estimated to grow large according to how much and how far it includes both extremes of data. This study is for the application to a design in future through the numerical formula of divided roads of various traditional villages. The studies from now on will be about the quasi-hilly quasi-hilly village and hilly village supplementing these factors more.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.200-210
• /
• 2017

This Research is focused on ancient battle formation basing on the layout drawing of Yijinchongbang (manuals of learning military formations) in a strategy book in the late Joseon dynasty. The research topic is the principles of organic composition of battle formation and battlefield operating system by reforming the basic model of ancient battle formation. The research method is comparative analysis by reforming the battlefield operating system of types of disposition such as Obangjindisposition(Bangnjin; battle formation, Jikjin; direct battle formation, Gokjin; bend battle formation, Wonjin; round battle formation, and Yejin; keen battle formation), and Hyunmoojindo; turtle battle formation, Paljindo; all-rounder battle formation, Yookhwajindo; six flowers battle formation, Gugunjindo; nine forms battle formation. From the study results, Standoff Bombing of the battle formation in the late Joseon Dynasty basically started out from magic battle formation, but was then transformed into square, rectangle, pentagon, and circle. Also, the battle array composition used a 5-linear structure and was composed of 5 systems of circulation such as rectangle, square, diagonal, curve, and circle. The research findings elucidate the battlefield of the Joseon dynasty by establishing the real battle formation, and thus have military and academic value in suggesting possible tactics that can be used by modern training of military.