• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.29-35
• /
• 2003

본 논문에서는 유전 알고리즘과 신경 회로망을 이용하여 선형유도전동기의 최적화 설계 방법에 대하여 연구하였다. 최대 추력 및 추력/중량을 목적함수로 하여 유전알고리즘, 신경회로망, 유전알고리즘과 신경회로망의 합성에 의한 방법으로 선형유도전동기의 최적설계를 한 결과 제안한 방법이 가장 우수함을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.34-45
• /
• 2012

In the present paper, the mover speed control of a linear induction motor (LIM) using a sliding mode control design is proposed, considering the end effects. First, the indirect field-oriented control LIM is derived, considering the end effects. The sliding mode control design is then investigated to achieve speed- and flux-tracking under load thrust force disturbance. The numerical simulation results of the proposed scheme present good performances in comparison to that of the classical sliding mode control.

• 조명전기설비학회논문지
• /
• 제19권5호
• /
• pp.68-73
• /
• 2005

본 논문은 선형유도전동기를 이용한 전자기펌프의 특성해석에 대하여 연구한 것이다. 전자기 펌프는 선형유도전 동기의 추진력에 의하여 용융 금속을 이송할 수 있다. 추진력을 높이기 위해 유전 알고리즘을 사용하여 최대 추력을 가지는 선형유도전동기를 설계 하고, 선형유도전동기를 이용한 전자기 펌프의 특성해석을 유동해석에 의하여 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.337-339
• /
• 1995

A Linear Induction Machine(LIM) is the motor which is developed from an rotary induction machine. Usually, the electromagnetic field of an LIM is analyzed by Maxwell's equations. The structure of an LIM is different from a conventional rotary machine, an LIM has some particular characteristics such as the end effects. Hence, the mathematical analysis of an LIM is very complicated and the implementation of the equivalent model is difficult. In this paper, the dynamic equations and the equivalent model of a Double-sided short primary LIM(DLIM) is obtained by the winding function and a d-q theory. The validity of the proposed methodology is verified by numerical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.25-27
• /
• 2003

In this paper the instantaneous thrust of a linear induction motor(LIM) with cage-type secondary is estimated by the line voltages and phase currents measurement when the LIM is fed by PWM inverter. The estimated thrust values according to various input frequencies are compared with the measured ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.21-24
• /
• 2002

In this paper, induced voltages of the secondary conductors of a linear induction motor(LIM) with cage-type secondary are measured and analyzed when the LIM is fed by PWM inverter. The attenuation constant of the induced voltage of the secondary conductors near entry and exit zones of the the travelling magnetic field are determined from the experiment results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1160-1164
• /
• 2001

The input voltage of linear Induction motors(LIMs) is involved with the time harmonics because most LIM is driven by inverter. Therefore the equivalent circuit for an inverter-fed LIM has to be modifided to represent every harmonic present in supply voltage. This paper describes that the dynamic characteristic can be used effectively for analyzing the characteristics of a linear induction motor position and speed control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.247-249
• /
• 1996

The indirect vector control method is generally used for variable speed control of induction motor, due to its excellent response characteristics. However, this is very sensitive to the variation of motor parameters caused by temperature rise and magnetic saturation and so on. Linear induction motor(LIM) has asymetric phase circuit parameters because of its special phenomena, end effects. So this paper describes on the method that identifies the circuit parameters using neural network in the vector control of LIM.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2011-2014
• /
• 2008

A linear induction motor for urban railway transit is accompanied with the end-effect and large air-gap comparing with a rotary induction motor. These cause amount of difference between simulation results and experiments. In order to figure out the difference, experiments based on a real-scale test bed are indispensable, however building a test-line and a test vehicle is so difficult that authors are going to make a small-scale model and simulate it for comparison. In this paper, A rotary-type small-scale model of a linear induction motor is designed. Thrust and normal force of the model have been analyzed with the variation of frequency and speed by using a Finite Element Method(FEM).

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.81-85
• /
• 2011

The end effect of a linear induction motor (LIM) has been known for several decades, especially in high speed operation. The exit part of the primary is not dealt as extensively as the entry part because of its minor effect. However, the exit part is one of the keys to weaken the dolphin effect, which occurs in high speed operation. In this paper, the concept of the virtual primary core is introduced, and chamfering of the primary outlet teeth is proposed to minimize the longitudinal end effect at the exit zone. For this, LIM for the high-speed train is designed and analyzed by using finite element method. Results confirm that chamfering can improve thrust performance effectively.