• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.65-66
• /
• 2017

본 논문은 자기부상열차 시스템의 부상 신뢰도 향상을 위한 선형 유도전동기의 순시 제어기법을 제안한다. 선형 유도전동기는 자기부상열차의 추진을 담당하며, 운전 속도와 입력 주파수에 따른 슬립 특성이 존재한다. 이 슬립 특성은 전동기에서 발생되는 수직력과 밀접한 관련을 보이며, 이는 부상 시스템에 외란으로 작용된다. 따라서 본 논문에서는 선형 유도전동기의 특성을 FEM 해석을 통해 정확히 분석하고, 이를 반영한 최적 슬립 주파수 간접벡터제어 기법을 통해 부상 신뢰도 향상을 위한 새로운 순시 제어기법을 제안 하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.59-66
• /
• 1998

In this paper, the thrust control of PWM Inverter-Fed SLIM(Single-sided Linear Induction Motor) is achieved with Space Vector control and PI control. The trembling of air gap length which is occurred between the primary winding core and the secondary structure of the SLIM must be minimized in order to get quick response characteristics. First, the equivalent circuits and voltage equations of SLIM are shown on th suitable d-q axis which analyze characteristics of the thrust and the normal force. Also, modeling and analysis of the equivalent circuits transferred d-q axis are able to make robust transient torque from the current regulation in the equivalent circuit. These results exemplified the direct drive of SLIM with the reference speed and torque were verified by experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.102-107
• /
• 1998

UTM-01 is the first fall sized maglev test vehicle which is being developed by KIMM and Hyundai Precision and Industrial Co., since 1995. The vehicle employs normal conducting magnets for levitation and single sided linear induction motor for propulsion. The test vehicle has been under tests to assure its required performance since last May 1997. This paper reports various system level test results compared with simple 2 degree of freedom dynamic calculations. Test results include performance of the levitation and guidance system, propulsions system, and the dynamic behavior of the elevated guideway under the passage of the maglev vehicle.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.611-613
• /
• 2001

In this paper, the force test of arch-type LIM is treated. The method of direct measurement is used load-cell on 3-component force guage. Indirect method is used search coil on LIM. PC-based data aquistion system include two method and measure the force in driving state. Measured data of direct and indirect method are analyzed and compared.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1310-1319
• /
• 2010

This paper has shown that Linear Induction Motor(LIM) and Rack and pinion type are efficient in selecting railway routes and systems after considering time, geo-spatial characteristics and the floating population by benchmarking domestic and overseas mountain trains. The benefit-cost analysis through the use of modeling on user's willingness to pay is conducted as a means that provides access to tourism resources. this paper concludes that the benefit-cost varies in response to changes in the amount of user's willingness to pay by age. It is expected that this paper serves as a reference data in the introduction stage of the mountain train project implemented by central or local governments with tourism resources in mountainous areas as the mountain train has turned out to be economically efficient while various potential benefits that have not been included in the benefit-cost analysis need to be quantified and remain to be studied further.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1451-1455
• /
• 2007

MAGLEV(Magnetic Levitation) with Middle-low speed be classified as a kind of LRT(Light Rail Transit) in KOREA. Also this vehicle has adopted LIM propulsion method. The MAGLEV has adopted LIM type in operational or developing model in the world. The power rail of LIM is very similar with the 3th rail of LRT in the functional property but the structure and shape of power rail is different with that. WE have to search the optimal power rail system for Korean MAGLEV vehicle. In this paper, we suggest the conceptual design and direction of design for power rail of Korean MAGLEV developing.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.9-11
• /
• 1995

In this paper, tile squirrel case induction motors required multi-objective function are designed. As the objective function of the optimization program, we select the linear combination of loss and mass of motors by using weighting factors. Optimization process is performed by using the evolution strategy (ES). ES is the algorithm that can find the global minimum. To verify validity of the proposed method, a sample design is tried.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.18-20
• /
• 1995

In this paper we presented a calculation method of leakage inductance in electrical machines. For its accurate calculation the finite element method is applied to the analysis of magnetic field distribution. The self and mutual inductances are derived using the results of the magnetic field analysis and the leakage inductance is easily obtained from these inductances. As numerical examples, we tread a single phase transformer and a rotor slot model of induction motor. In the finite element analysis we used the 2D linear magnetostatic formulation with the first-order triangular element.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1042-1043
• /
• 2008

본 논문에서는 국내 경전철에 사용되는 선형유도전동기의 성능 분석을 통하여 지상 2차측의 방식을 선정하고자 한다. 일반적으로, 등가회로를 이용한 해석적 방법은 선형전동기의 커다란 공극, 단부효과, 횡방향 효과, 3차원 형상, 회전기에 비해 상대적으로 큰 누설 등으로 인하여 성능을 정확히 예측할 수 없다. 또한, 수치해석적 방법은 고용량의 메모리와 해석시간을 요구한다. 그러나 본 논문에서는 등가회로법과 수치해석법을 혼용하여 좀 더 빠르고 정확한 성능 분석을 수행하였으며 제안된 방법을 통하여 도시철도차량용 선형유도전동기에 적합한 2차측 방식을 선정하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.758-759
• /
• 2008

This paper presents a design of the electromagnetic pump with an tubular type linear induction motor(TLIM). The TLIM was designed for the fluid system, flow rate $15[{\ell}/min]$, and the thrust 39[N] at 0.29[m/s]. The TLIM is compared measurement with analysis. The electromagnetic pump of flow characteristics are calculated by treating TLIM thrust as a source term in the Navier-Stokes equation. The numerical analysis of flow characteristics of the liquid metal is presented for the various condition and discussed.