• 산업경영시스템학회지
• /
• 제19권40호
• /
• pp.233-240
• /
• 1996

A fixed amount compensator is proposed for a process with a linear tool wear function. A Cost model is constructed which involve process adjustment cost and quality loss. Symmetric and asymmetric quadratic functions of the deviation of a quality measurement from the nominal target value are considered as the quality loss functions. Methods of finding optimal values of initial setting and compensation limit are presented and a numerical example is given.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.38-43
• /
• 1999

A calculation method of optimum parameters on dual adsorption isotherm system was examined. The optimum parameters were obtained by non-linear regression analysis based upon a limited solute concentration of dual adsorption isotherm. The results were analyzed with adducing experimental data of formerly reported treaties. The percentage mean deviation of dual adsorption equation calculated with optimum parameters was less than about 5% of experimental data, which was far less than results obtained with parameters of the adduced treatises.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.393-398
• /
• 2006

This paper classifies driving technologies for AMOLEDs by the driving TFT conditions in pixels. A saturation region operation type driving TFT circuit provides good stability of OLED because of constant current drive. However, complicated compensation circuits are necessary to avoid effect of the TFT characteristics deviation. On the other hand, a linear region operation type driving TFT circuit provides better uniformity of the display image and lower power consumption. However, the stability of OLED is critical because of constant voltage drive.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.26-29
• /
• 2000

drawbead expert models are developed for calculating drawbead restraining force and drawbead-exit thinnings which are boundary conditions in FEM stamping simulation employing the linear multiple regression method by which the deviation of drawing characteristics between drawing test and mathematical model is minimized. In order to show the efficiency and accuracy of an expert drawbead model a finite element simulation of auto-body panel stamping is carried out. The finite element simulation shows that the expert drawbead model provides the accurate solution guarantees the stable convergence and the merit in the computation time.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.127-134
• /
• 2006

Based on a weakly non-Gaussian theory the occurrence probability of freak waves is formulated in terms of the number of waves in a time series and the surface elevation kurtosis. Finite kurtosis gives rise to a significant enhancement of freak wave generation in comparison with the linear narrow banded wave theory. For fixed number of waves, the estimated amplification ratio of freak wave occurrence due to the deviation from the Gaussian theory is 50% - 300%. The results of the theory are compared with laboratory and field data.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.329-330
• /
• 2008

We experimentally demonstrate resonant-wavelength control of a series of an Si-based photonic crystal nanocavity. The cavities show a linear dependence on these parameters, a 1 nm increase of lattice constant leading to 4.2 nm increase of the resonant wavelength. The results have a small standard deviation of wavelength 1.1 nm between samples on a single chip.

• Advances in nano research
• /
• 제1권4호
• /
• pp.203-210
• /
• 2013

So far, all reviews and control approaches of spin relaxation have been done on lateral single electron quantum dots. In such structures, many efforts have been done, in order to eliminate spin-lattice relaxation, to obtain equal Rashba and linear Dresselhaus parameters. But, ratio of these parameters can be adjustable up to 0.7 in a material like GaAs under high-electric field magnitudes. In this article we have proposed a single electron QD structure, where confinements in all of three directions are considered to be almost identical. In this case the effect of cubic Dresselhaus interaction will have a significant amount, which undermines the linear effect of Dresselhaus while it was destructive in lateral QDs. Then it enhances the ratio of the Rashba and Dresselhaus parameters in the proposed structure as much as required and decreases the spin states up and down mixing and the deviation angle from the net spin-down As a result to the least possible value.

• 대한치과교정학회지
• /
• 제6권1호
• /
• pp.55-63
• /
• 1976

This study was undertaken to establish the roentgenocephalometric standards of the Korean children in Hellman dental age III C. The subjects consisted of 33 males and 33 females with the normal occlusion and acceptable profile. The lateral cephalometric films were taken with the teeth in centric occlusion, the soft tissue outline of the nose, lips, and chin was made visible by the low-speed films, 70Kvp, 100Mas. Their linear and angular measurements were performed by Jarabak's methods. The following results were obtained; 1) The author made the tables of standard deviation from the measured values. 2) Each linear measurement of the skull was greater in males than in females. 3) The maxillary basal bones were more protrusive in Korean children than in Caucasian. 4) The degree of the facial convexity was larger in Korean children than in Caucasian. 5) The labial inclination of the upper & lower incisors was greater in Korean children than in Caucasian. The labial inclination of the upper incisor was greater in females, but the labial inclination of the lower incisor was greater in males.

• 품질경영학회지
• /
• 제28권3호
• /
• pp.124-132
• /
• 2000

A selected subject and a standardized scoring system were newly enforced at college entrance examination from 1999. A selected subject system means each student can select one subject in addition to common subject in the field of mathematical research II and a standardized scoring system means we standardize the score of each field as mean 50 and standard deviation 10 in order to adjust the degree of difficulty between fields. In the field of mathematical research II, there may exist not only difference of the degree of difficulty but also that of general studying ability between groups of selected subjects. So when we standardize score, we have to consider them. So far a linear equating which is a parametric method and an equi-percentile equating which is a nonparametric method have been published, but both of them supposed that the general studying ability between groups was equal. So in this paper an adjusted linear and percentile equating method which seems to be adequate to our entrance examination is suggested and is investigated by computer simulation.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.240-246
• /
• 2000

An in-process estimation of the ground surface roughness is a bottle-neck and an essential field in conventional grinding operation. We defined the dimensionless average roughness factor (D.A.R.F) that exhibits a roughness characteristics of ground surface. The D.A.R.F was composed easily of the absolute average and the standard deviation values which were the analytic parameters of the acoustic emission (AE) signal generated during the machining process. The theoretical equation between the surface roughness and the D.A.R.F has been derived from the linear regressive analysis and verified its availability through the experimentation on the surface grinding machine.