• Title/Summary/Keyword: Linear cell source

Search Result 53, Processing Time 0.024 seconds

Numerical Simulation on the Onset of Radial Fingering in a Hele-Shaw Cell or a Porous Medium

  • Min Chan Kim
    • Korean Chemical Engineering Research
    • /
    • v.62 no.1
    • /
    • pp.112-117
    • /
    • 2024
  • Numerical simulations on the onset and the growth of viscous fingering during the miscible displacement due to the radial source flow were conducted. With introduction of a new stability criterion, the critical log-viscosity ratio, Rc, was found as a function of the Peclet number, Pe. Similar to the previous linear stability analyses, Pe made the system unstable, i.e., accelerated the onset of instability. For a large Pe system, the present numerical simulation yielded much stable results than the previous theoretical predictions This discrepancy was commonly encountered in the comparison between the theoretical prediction and the experimental finding. Additionally, the difference between the rectilinear system and the present one was also discussed. The present system was found more insensitive to the Peclet number than the rectilinear one.

Multi-Source Based Energy Harvesting Architecture for IoT and Wearable System (IoT 및 웨어러블 시스템을 위한 멀티 소스 기반 에너지 수확 구조)

  • Park, Hyun-Moon;Kwon, Jin-San;Kim, Byung-Soo;Kim, Dong-Sun
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.14 no.1
    • /
    • pp.225-234
    • /
    • 2019
  • By using the Triboelectric nanogenerators, known as TENG, we can take advantages of high conversion efficiency and continuous power output even with small vibrating energy sources. Nonlinear energy extraction techniques for Triboelectric vibration energy harvesting usually requires synchronized active electronic switches in most electronic interface circuits. This study presents a nonlinear energy harvesting with high energy conversion efficiency to harvest and save energies from human active motions. Moreover, the proposed design can harvest and store energy from sway motions around different directions on a horizontal plane efficiently. Finally, we conducted a comparative analysis of a multi-mode energy storage board developed by a silicon-based piezoelectricity and a transparent TENG cell. As a result, the experiment showed power generation of about 49.2mW/count from theses multi-fully harvesting source with provision of stable energy storages.

Ocean bottom reverberation and its statistical characteristics in the East Sea (동해 해역에서 해저면 잔향음 및 통계적 특징)

  • Jung, Young-Cheol;Lee, Keun-Hwa;Seong, Woojae;Kim, Seongil
    • The Journal of the Acoustical Society of Korea
    • /
    • v.38 no.1
    • /
    • pp.82-95
    • /
    • 2019
  • In this study, we analyzed the beam time series of ocean reverberation which was conducted in the eastsouthern region of East Sea, Korea during the August, 2015. The reverberation data was gathered by moving research vessel towing LFM (Linear Frequency Modulation) source and triplet receiver array. After signal processing, we analyzed the variation of ocean reverberation level according to the seafloor bathymetry, source/receiver depth and sound speed profile. In addition, we used the normalized data by using cell averaging algorithm and identified the statistical characteristics of seafloor scatterer by using moment estimation method and estimated shape parameter. Also, we analyzed the coincidence of data with Rayleigh and K-distribution probability by Kolmogorov-Smirnov test. The results show that there is range dependency of reverberation according to the bathymetry and also that the time delay and the intensity level change depend on the depths of source and receiver. In addition, we observed that statistical characteristics of similar Rayleigh probability distribution in the ocean reverberation.

Development of smart-phone contents for mobile linear algebra (모바일 선형대수학 스마트폰 콘텐츠 개발과 활용)

  • Kim, Kyung-Won;Lee, Sang-Gu
    • Communications of Mathematical Education
    • /
    • v.27 no.2
    • /
    • pp.121-134
    • /
    • 2013
  • Linear Algebra are arguably the most popular math subjects in colleges. We believe that students' learning and understanding of linear algebra can be improved substantially if we incorporate the latest advanced information technologies in our teaching. We found that the open source mathematics program 'Sage' (http://sagemath.org) can be a good candidate to achieve our goal of improving students' interest and learning of linear algebra. In particular, we developed a simple mobile content which is available for Sage commands on common cell phones in 2009. In this paper, we introduce the mobile Sage which contains many Sage functions on a smart-phone and the mobile linear algebra content model(lecture notes, and video lectures, problem solving, and CAS tools) and it will be useful to students for self-directed learning in college mathematics education.

Two-Step Fed-Batch Culture of Recombinant Escherichia coli for Production of Bacillus licheniformis Maltogenic Amylase

  • Kim, Myoung-Dong;Lee, Woo-Jong;Park, Kwan-Hwa;Rhee, Ki-Hyeong;Seo, Jin-Ho
    • Journal of Microbiology and Biotechnology
    • /
    • v.12 no.2
    • /
    • pp.273-278
    • /
    • 2002
  • Two-step fed-batch fermentations were carried out to overproduce Bacillus licheniformis maltogenic amylase (BLMA) in recombinant Escherichia coli. The first step was to increase the cell mass by controlling the feeding of a glucose solution, while the second step was designed to improve the amylase expression efficiency by supplementing organic nitrogen sources. The linear gradient feeding method was successfully adopted to maintain the glucose concentration below 0.2 g/l during the fed-batch mode, as effectively minimizing acetic acid formation. When the dissolved oxygen (DO) level became limiting, an accumulation of acetic acid and drastic decrease in specific BLMA productivity were observed. Glucose and organic nitrogen sources consisting of yeast extract and casein hydrolysate were simultaneously supplied in the pH-stat mode to further increase the specific BLMA expression efficiency. An organic nitrogen source consisting of 200 g/1 yeast extract and 100 g/1 casein hydrolysate was found to be the best among the various combinations tested. The feeding of an organic nitrogen source in the second-step fed-batch period was highly beneficial in enhancing the BLMA production. The optimized two-step fed-batch culture resulted in 78 g/l maximum dry cell mass and 443 U/ml maximum BLMA activity, corresponding to 1.5-fold increase in the dry cell mass and 3.7-fold enhancement in BLMA production, compared with the simple fed-batch fermentation.

Isolation of Pseudomonas putida BM01 Accumulating High Amount of $PHA_{MCL}$

  • Song, Jae-Jun;Yoon, Sung-Chul
    • Journal of Microbiology and Biotechnology
    • /
    • v.4 no.2
    • /
    • pp.126-133
    • /
    • 1994
  • A Pseudomonas putida strain able to accumulate high amount of polyesters of medium-chain-length 3-hydroxyalkanoic acids ($PHA_{MCL)$) was isolated from soil in a landfill site using an enrichment technique. Culture condition of the isolated strain for polyester production in a one-step culture was optimized in a mineral-salts medium against pH and concentrations of ammonium sulfate, carbon source(e.g., octanoate), and phosphate. The optimal values for maximal cell growth and PHA accumulation were: pH; 7$\sim$8, $(NH_4)_2SO_4$; 8 mM, octanoate; 40 mM. The optimum temperature was in the range of $20\sim30^{\circ}C$, which was rather broader than in other bacteria. Cell growth was strongly inhibited by the phosphate limitation to less than 1 mM. An increase of phosphate concentration above 1 mM showed little effect on cell growth and polyester accumulation. When the strain was grown on octanoate under this optimized condition it produced 3.4 g dry biomass per liter and yielded 1.7 g PHA per liter amounting to 53 wt% of dry cells. The monomer units composing the polyester synthesized from octanoate were 3-hydroxyoctanoate (3HO), 3-hydroxycaproate (3HC), and 3-hydroxybutyrate (3HB) (85:13:2, mole ratio). Other low linear $C_3\simC_{10}$ monocarboxylic acids were also tested for polyester production.

  • PDF

A Study on Dynamic Bandwidth Allocation of Multiplexed MPEG Video Sources over ATM Network (ATM망에서 다중화된 MPEG 비디오소스의 동적 대역폭 할당)

  • 하창국;김장복
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.6
    • /
    • pp.381-381
    • /
    • 2000
  • In this paper, we propose a real-time bandwidth allocation scheme of multiplexed VBR MPEG video sequences over ATM network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. If the result CLR value were not sufficient, we proposed a overallocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of foot different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared overallocation with reallocation method. As a result, in both schemes, the objected CLR value is achieved, the sufficient value COR under 10% when mp is over 1.8 sec, the utilization is over 0.9. Especially, the COR value of the reallocation scheme is better at the same condition.

A Study on Dynamic Bandwidth Allocation of Multiplexed MPEG Video Sources over ATM Network (ATM망에서 다중화된 MPEG 비디오소스의 동적 대역폭 할당)

  • Song, Jae-Yeon;Lee, Sang-Yeop;Ha, Chang-Guk;Kim, Jang-Bok
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.6
    • /
    • pp.21-27
    • /
    • 2000
  • In this paper, we propose a real-time bandwidth allocation scheme of multiplexed VBR MPEG video sequences over ATM network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. If the result CLR value were not sufficient, we proposed a overallocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of foot different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared overallocation with reallocation method. As a result, in both schemes, the objected CLR value is achieved, the sufficient value COR under 10% when mp is over 1.8 sec, the utilization is over 0.9. Especially, the COR value of the reallocation scheme is better at the same condition.

  • PDF

Advances in Biochemistry and Microbial Production of Squalene and Its Derivatives

  • Ghimire, Gopal Prasad;Nguyen, Huy Thuan;Koirala, Niranjan;Sohng, Jae Kyung
    • Journal of Microbiology and Biotechnology
    • /
    • v.26 no.3
    • /
    • pp.441-451
    • /
    • 2016
  • Squalene is a linear triterpene formed via the MVA or MEP biosynthetic pathway and is widely distributed in bacteria, fungi, algae, plants, and animals. Metabolically, squalene is used not only as a precursor in the synthesis of complex secondary metabolites such as sterols, hormones, and vitamins, but also as a carbon source in aerobic and anaerobic fermentation in microorganisms. Owing to the increasing roles of squalene as an antioxidant, anticancer, and anti-inflammatory agent, the demand for this chemical is highly urgent. As a result, with the exception of traditional methods of the isolation of squalene from animals (shark liver oil) and plants, biotechnological methods using microorganisms as producers have afforded increased yield and productivity, but a reduction in progress. In this paper, we first review the biosynthetic routes of squalene and its typical derivatives, particularly the squalene synthase route. Second, typical biotechnological methods for the enhanced production of squalene using microbial cell factories are summarized and classified. Finally, the outline and discussion of the novel trend in the production of squalene with several updated events to 2015 are presented.

A Highly Expandable Forwarded-Clock Receiver with Ultra-Slim Data Lane using Skew Calibration by Multi-Phase Edge Monitoring

  • Yoo, Byoung-Joo;Song, Ho-Young;Chi, Han-Kyu;Bae, Woo-Rham;Jeong, Deog-Kyoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.12 no.4
    • /
    • pp.433-448
    • /
    • 2012
  • A source-synchronous receiver based on a delay-locked loop is presented. It employs a shared global calibration control between channels, yet achieves channel expandability for high aggregate I/O bandwidth. The global calibration control accomplishes skew calibration, equalizer adaptation, and phase lock of all the channels in a calibration period, resulting in the reduced hardware overhead and area of each data lane. In addition, the weight-adjusted dual-interpolating delay cell, which is used in the multiphase DLL, guarantees sufficient phase linearity without using dummy delay cells, while offering a high-frequency operation. The proposed receiver is designed in the 90-nm CMOS technology, and achieves error-free eye openings of more than 0.5 UI across 9-28 inch Nelco4000-6 microstrips at 4-7 Gb/s and more than 0.42 UI at data rates of up to 9 Gb/s. The data lane occupies only $0.152mm^2$ and consumes 69.8 mW, while the rest of the receiver occupies $0.297mm^2$ and consumes 56.0 mW at the 7- Gb/s data-rate and supply voltage of 1.35 V.