• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.184-191
• /
• 2023

With increasing corrosion in RC (Reinforced Concrete) structures, cracks occurred due to corrosion products and bearing load resistance decreased. In this study, corrosion was induced through an accelerated corrosion test (ICM: Impressed Current Method) with 140 hours of duration, and changes in USV (Ultra-Sonic Velocity), flexural failure load, and corrosion weight were evaluated before and after corrosion test. Three levels of cover depth (20 mm, 30 mm, and 40 mm) were considered, and the initial cracking period increased and the rust around steel decreased with increasing cover depth. In addition, the USV linearly decreased with decreasing cover depth and increasing amount of corrosion. In the flexural loading test, the bending capacity decreased by more than 10% due to corrosion, but a clear correlation could not be obtained since the corrosion ratio was small, so that the effect of slip was greater than that of reduced cross-sectional area of steel due to corrosion. As cover depth increased, the produced corrosion amount and USV changed with a clear linear relationship, and the cracking period due to corrosion could be estimated by the gradient of the measured corrosion current.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.128-137
• /
• 2023

In this study, the bearing pressure on the rubble mound of a gravity-based harbor structure with an arbitrarily shaped bottom was targeted. Assuming that the bottom of the structure is a rigid body, the rubble mound was modeled as a linear spring uniformly distributed on the bottom that resists compression only, and the bearing pressure evaluation formula was derived. It was confirmed that there were no errors in the derivation process by showing that when the bottom was square, the derived equation was converted to the equation used in the design. In addition, the validity of the derived equation was proven by examining the behavior and convergence value of the bearing pressure when an arbitrarily shaped bottom converges into a square one. In order to examine the adequacy of the method used in the current design, the end bearing pressure for the pre-designed breakwater cross-section was calculated and compared with the values in the design document. As a result, it was shown that the method used for design was not appropriate as it gave unsafe results. In particular, the difference was larger when the eccentricity of the vertical load was large, such as in the case of extreme design conditions.

• Korean Journal of Culture and Social Issue
• /
• v.29 no.4
• /
• pp.617-636
• /
• 2023

The goal of this study was to explain the phenomenon of making efforts to overcome the need-reality collision as a cultural characteristic of Koreans. Specifically, we examined whether the behavior varies depending on the degree of relational agency in the situation where conflicts between one's needs and reality have occurred. To this end, a total of 217 participants participated in the online experiment, and the data of 156 participants were finally analyzed. After responding to the relational agency scale, the participants were exposed to a decision-making scenario in which conflicting factors existed. The scenario were about buying a house and making a wedding hall contract, and in each scenario, two important values were set to conflict with each other in the market. Participants read the scenario and entered the level they wanted for each value. After that, they encounter a situation in which he or she has not found the candidate site corresponding to the level he or she wants. Then, the participants responded to their willingness to make additional efforts themselves. As a result of the study, the degree of relational agency of the participants showed a positive relationship with the degree of additional effort. In addition, the degree of the desired level beyond the reality (expectancy discrepancy) showed a nonlinear (reverse U-shape) influence on the additional effort while controlling for individual difference. Furthermore, the interaction effect between relational agency and expectancy discrepancy was significant. Specifically, individuals with low agency did not have a significant relationship between the degree of expectancy discrepancy and the dependent variable, but individuals with high relational agency had a significant non-linear relationship between the degree of expectancy discrepancy and the dependent variable. Based on the results of the study, the role and function of Koreans' psychological characteristics (relational agency) in the scene of managing needs-reality collision were discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.43-52
• /
• 2024

In this study, we evaluated the seismic performance of a masonry building that was not designed to be earthquake-resistant and attempted to improve the seismic performance by adopting a seismic reinforcement method on the exterior of the building. In addition, the building seismic design standards and commentary(KDS 41 17 00:2019) and existing facility(building) seismic performance evaluation methods were applied to evaluate seismic performance, and a pushover analysis was performed using non-linear static analysis. As the result of this study, it was determined that seismic reinforcement was urgent because the distribution rate of earthquake-resistant design of houses in Korea was low and masonry structures accounted for a large proportion of houses. When reinforcing the steel beam-column+brace frame in a masonry building, the story drift angle was 0.043% in the X direction and 0.047% in the Y direction, indicating that it satisfied the regulations. The gravity load resistance capacity by performance level was judged to be a safe building because it was habitable in both X and Y directions. In conclusion, it is believed that the livability and convenience of the house can be secured by reinforcing the exterior of the building and the seismic performance and behavior of the structure can be clearly predicted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.4
• /
• pp.1-17
• /
• 2024

This study analyzed the behaviors and satisfaction of park users in nine parks representing first and second-generation new towns, aiming to propose directions for planning new town parks. According to the analysis, park users in new towns mainly visit parks for purposes such as relaxation, strolling, and exercise, often with family, alone, or with friends. They typically spend 1-2 hours in the park and mostly access it on foot. Additionally, satisfaction with park accessibility is high, particularly among pedestrians. Satisfaction survey results indicate that pedestrian pathways, trees and vegetation, water features, rest areas, and cultural facilities have the greatest impact on overall park satisfaction. Playgrounds and sports facilities show relatively lower satisfaction levels, indicating a need for improvement. Furthermore, according to NPS analysis, park users are highly willing to recommend parks, especially with Gwanggyo Lake Park and Dongtan Central Park receiving high recommendation scores. IPA analysis shows that pathways and vegetation are perceived as highly important and satisfactory, while playgrounds and sports facilities are categorized as areas needing improvement. Thus, there is a need to consider improvement strategies for each. Additionally, identifying park users' grievances can lead to creating a better park environment. Finally, concerning the planning direction for new town parks, linear-shaped parks facilitating walking are preferred, with parks preserving natural terrain and forests deemed the most desirable. Based on these results, future city parks, including those in the third-generation new towns, should harmonize with nature and prioritize pedestrian access.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.2
• /
• pp.77-84
• /
• 2015

According to a recent survey, the sales amount of luxuries and imitations is getting larger. Especially young consumers in 2,30's have a strong desire to own luxuries, so I tried to build a theoretical base on the 20's consuming trend. Meanwhile, targeting university students who represent consumers in 20's, I investigated the recognition of luxuries, shopping experience, main shopping items, monthly spending money, and future purchase intention. I also investigated shopping experience of imitation, main shopping items, purchase reasons, and future purchase intention. I tried to suggest lots of academic and practical implications in marketing strategy building of luxury brand, aiming young consumers in 20's. On the social-psychological view point, young generation have relatively weak sense of control or self-efficacy. So, they are easily submerged in conspicuous consumption by the atmosphere around. As a result of empirical research, I found that Korean students recognized luxuries as excellent in quality, or the world famous brand. In particular, statistically significant gender difference was shown in the luxuries characteristics as the high-quality brand for male students and the world famous brand for female students. Most respondents have experience buying luxuries. And more monthly spending money, more experience they have. Respondents' purchased items were in order of fashion goods, clothing, watches/jewelry, cosmetics/perfume. And the statistically significant differences between gender and monthly spending money were shown. Not many respondents purchased luxuries imitations, and main purchased items were fashion goods. Most of purchase motives are price over quality and economy reason. The phenomena that the respondents of relatively high levels of monthly spending money had lots of luxuries imitations shopping experiences is interesting. Female students showed higher purchase intention for luxuries and imitations than male students. There was no statistically significant difference in grade level, but was found something interesting in monthly spending money. As monthly spending money increased, the purchase intention of luxuries increased, but the purchase intention of luxuries imitations decreased. However, non-linear trend was shown in the specific allowance level. This is replicate of the luxuries imitations purchase experience. Following studies will be needed for the exact interpretation for this. This study is an exploratory and descriptive, but can provide lots of fruitful academic and practical implications in formulating luxuries marketing strategies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.275-284
• /
• 1997

This experiment was carried out to measure the sinking depth of each buoy, the change in the net shape of the net, and the tension of sand bag line according to the R (from bag net to the fish court) and L (from fish court to the bag net) current directions and their velocity by the model experiment. The model net was one-fiftieth of the real net, and its size was determined after considering the Tauti’s Similarity Law and the dimension of the experimental tank. 1. The changes of the net shape were as follows : In the current R, the end net of fish court moved 20mm down the lowerward tide and 10mm upper part. So the whole model net moved up at 0.2m/sec. The shape of the net showed an almost linear state from bag net to the fish court at 0.6m/sec. In the current L, the door net moved 242mm down the lowerward tide and 18mm upper part. So the whole model net moved up at 0.2m/sec. The net shape showed an almost linear state from the fish court to the bag net at 0.5m/sec. 2. The sinking depths of each buoy were as follows: In the current R, the head buoy started sinking at 0.2m/sec and sank 20mm, 99mm at 0.3m/sec and 0.6m/sec, respectively. The end buoy didn't sink from 0m/sec to 0.6m/sec but showed a slight quake. In the current L, the end buoy started sinking at 0.1m/sec, and sank 5mm and 108mm at 0.2m/sec and 0.6m/sec, respectively. The whole model net sank at 0.5m/sec except the head buoy. 3. The changes of the sand bag line tension were as follows: In the current R, the tension affected by the sand bag line of the head buoy showed 273.51g at 0.1m/sec increased to 1298.40g at 0.6m/sec. In the current L, the tension affected by the sand bag line of the end buoy on one side showed 137.08g at 0.1m/sec increased to 646.00g at 0.6m/sec. The changes in the sand bag line tension were concentrated on the sand bag line of the upperward tide with increasing velocity at the R and L current directions. However, no significant increase in tension was observed in the other sand bag lines.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.62-74
• /
• 2010

This study aims to examine what factors citizens value in urban parks and green spaces in terms of usage and aesthetic value and to find ways to deal with the changing patterns of user satisfaction for these various green elements. To achieve this, the study developed a dynamic model employing a transactional approach to evaluate environmental quality for 1999 and 2007 in Anyang City as well as a conceptual model of parks and greens satisfaction. This study relied on an empirical study method including the 1999 and 2007 green conditional survey and citizen questionnaires totaling 573 in the year 1999 and 982 in the year 2007. As a result, first, the factor 'urban parks' is the most important factor and 'cityscape' is the second most important factor in parks and greens satisfaction(PGS). Second, PGS in turn causes environmental quality satisfaction(EQS), which is related to two items--'urban livability' and 'aesthetic quality'--in the model. This means that PGS is the intervening variable of urban livability. Third, the factor analysis resulted in six factors: cityscape, urban green, linear facilities, urban parks, riverside green, and urban forest. 'Riverside green' emerged as a factor in 2007 as a result of public participation in the 'Anyang River Revitalization Project'. Fourth, through a transactional view, the environmental changes result in either a change in or stability of public attitude. The levels of satisfaction were elevated but patterns of satisfied-unsatisfied items remained unchanged for most factors. The perception of riverside a greenway and linear surface facilities(pedestrian walkways, biking and jogging trails, etc.) have changed positively. PGS changed significantly in 2007, as a result of urban events and development, including parks, rivers and greenways which were built through the joint effort of the local government and civic participation.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.90-104
• /
• 2019

In this study, CALPUFF modeling was performed, using a real surface and upper air meterological data to predict trustworthy modeling-results. Pollutant-releases from windscreen chambers of enclosed poultry farms, P1 and P2, and from a open poultry farm, P3, and their diffusing behavior were modeled by CALPUFF modeling with volume sources as well as by finally-adjusted CALPUFF modeling where a linear velocity of upward-exit gas averaged with the weight of each directional-emitting area was applied as a model-linear velocity ($u^M_y$) at a stack, with point sources. In addition, based upon the scenario of poultry farm-releasing odor and particulate matter (PM) removal efficiencies of 0, 20, 50 and 80% or their corresponding emission rates of 100, 80, 50 and 20%, respectively, CALPUFF modeling was performed and concentrations of odor and PM were predicted at the region as a discrete receptor where civil complaints had been frequently filed. The predicted concentrations of ammonia, hydrogen sulfide, $PM_{2.5}$ and $PM_{10}$ were compared with those required to meet according to the offensive odor control law or the atmospheric environmental law. Subsequently their required removal efficiencies at poultry farms of P1, P2 and P3 were estimated. As a result, a priori assumption that pollutant concentrations at their discrete receptors are reduced by the same fraction as pollutant concentrations at P1, P2 and P3 as volume source or point source, were controlled and reduced, was proven applicable in this study. In case of volume source-adopted CALPUFF modeling, its required removal efficiencies of P1 compared with those of point source-adopted CALPUFF modeling, were predicted similar each other. However, In case of volume source-adopted CALPUFF modeling, its required removal efficiencies of both ammonia and $PM_{10}$ at not only P2 but also P3 were predicted higher than those of point source-adopted CALPUFF modeling. Nonetheless, the volume source-adopted CALPUFF modeling was preferred as a safe approach to resolve civil complaints. Accordingly, the required degrees of pollution prevention against ammonia, hydrogen sulfide, $PM_{2.5}$ and $PM_{10}$ at P1 and P2, were estimated in a proper manner.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.4
• /
• pp.704-713
• /
• 1997

This study was conducted to describe qualitatively the protein metabolism of pigs during growth depending on the feed protein quality and to describe quantitatively amino acids requirements, using a simulation model. The used model has a non-linear structure. In the used model, the protein utilization system of a pig, which is in the non-steady-state, is described with 15 flux equations and 11 differential equations and is composed with two compartments. Protein deposition(g/day) of pigs on the 30th, 60th, 90th, and 120th day of feeding duration with three-quality protein, beginning with body weight 20kg, were calculated according to the empirical model, PAF(the product of amino acid functions) of Menke, and was used as object function for the simulation. The mean of relative difference between the simulated protein deposition and PAF calculated values, lied in a range of 8.8%. The simulated protein deposition showed different behavior according to feed protein quality. In the high-quality protein, it showed paraboloidal form with extending growth simulation up to 150eh day. So the maximum of protein deposition was acquired on the 105th day of simulate growth time and then it decreased fast. In the low-quality protein, this form of protein deposition in the course of simulated growth did not appear until 150th day. The simulated protein mass also showed a difference in accordance with feed protein quality. The difference was small on the 30th day of simulated growth, but with duration of the simulated growth it was larger. On the 150th day the simulated protein deposition of high quality protein was 1.5 times higher as compared to the low-quality protein. The simulated protein synthesis and break-down rates(g/day) in the whole body showed a parallel behavior in the course of growth, according to feed protein quality. It was found that the improvement of feed protein quality increased protein deposition in the whole body through a increase of both protein synthesis and breakdown during growth. Also protein deposition efficiency, which was calculated from simulated protein deposition and protein synthesis, showed a difference in dependence on the protein qualify of feed protein. The protein deposition efficiency was higher in pigs fed with high quality protein, especially at the simulation time 30th day. But this phenomena disappeared with growth, so on the 150th day of growth, the protein deposition of the high feed protein quality was lowest among the three different quality of feed protein. The simulated total requirement of the 10 essential amino acids for the growth of pigs was 28.1(g/100g protein), similar to NRC. The requirement of lysine was 4.2(g/100g protein).