• 경영과학
• /
• 제32권1호
• /
• pp.49-63
• /
• 2015

This paper investigates an aircraft-target assignment problem in consideration of deconfliction. The aircraft-target assignment problem is the problem to assign available aircrafts and weapons to targets that should be attacked, where the objective function is to minimize the total expected damage of aircrafts. Deconfliction is the way of dividing airspaces for aircraft flight to ensure the safety while performing the mission. In this paper, mixed integer programming model is suggested, where it considers deconfliction between aircrafts. However, the suggested MIP model is non-linear and limited to get solution for large size problem. The 2-phase decomposition model is suggested for efficiency and computation, where in the first phase target area is divided into sectors for deconfliction and in the second phase aircrafts and weapons are assigned to given targets for minimizing expected damage of aircraft. The proposed decomposition model shows outperforms the model developed for comparison in the computational experiment.

• 대한전기학회논문지
• /
• 제41권3호
• /
• pp.300-310
• /
• 1992

This paper deals with the problem of robust pole-assignment control for linear systems with structured uncertainty. It considers two cases whose colsed-loop characteristic equations are presented as a family of interval polynomial and polytopic polynomial family respectively. We propose a method of finding the pole-placement region in which the fixed gain controller guarantees the required damping ratio and stability margin despite parameter perturbation. Some results of Kharitonov like stability and two kinds of transformations are included. As an illustrative example, we show that the proposed method can apply effectivly to the single magnet levitation system including some uncertainties (mass, inductance etc.).

• 한국산업정보학회논문지
• /
• 제27권2호
• /
• pp.61-69
• /
• 2022

다수 에이전트 시스템(Multi-agent system)은 에이전트 각자의 결정으로 최상의 조직화 된 결정을 달성하는 것을 목표로 하는 시스템으로 본 논문에서는 다수 에이전트-다수 작업의 할당 문제를 제시한다. 본 문제는 각 에이전트가 하나의 작업에 할당이 되어 수행하고, 작업 수행에 대한 작업 완료 확률(completion probability)이 있으며 모든 작업의 수행 확률을 최대화하는 할당을 결정한다. 비선형(non-linearity)의 목적함수와 조합 최적화(combinatorial optimization)로 표현되는 본 문제는 NP-hard로, 효과적이면서 효율적인 문제 해결 방법론 제시가 필요하다. 본 연구에서는 한계 이익(marginal gain)의 감소를 의미하는 하위모듈성(submodularity)을 활용한 근사 알고리즘(approximation algorithm)을 제안하고, 확장성(scalability)과 강건성(robustness) 측면에서 우수한 알고리즘임을 이론 및 실험적으로 제시한다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1993년도 추계학술대회발표논문집; 서강대학교, 서울; 25 Sep. 1993
• /
• pp.12-19
• /
• 1993

In general, the line balancing problem is defined as of finding an assignment of the given jobs to the workstations under the precedence constraints given to the set of jobs. Usually, the objective is either minimizing the cycle time under the given number of workstations or minimizing the number of workstations under the given cycle time. In this paper, we present a new type of an assembly line balancing problem which occurs in an electronics company manufacturing home appliances. The main difference of the problem compared to the general line balancing problem lies in the structure of the precedence given to the set of jobs. In the problem, the set of jobs is partitioned into two disjoint subjects. One is called the set of fixed jobs and the other, the set of floating jobs. The fixed jobs should be processed in the linear order and some pair of the jobs should not be assigned to the same workstations. Whereas, to each floating job, a set of ranges is given. The range is given in terms of two fixed jobs and it means that the floating job can be processed after the first job is processed and before the second job is processed. There can be more than one range associated to a floating job. We present a procedure to find an approximate solution to the problem. The procedure consists of two major parts. One is to find the assignment of the floating jobs under the given (feasible) assignment of the fixed jobs. The problem can be viewed as a constrained bin packing problem. The other is to find the assignment of the whole jobs under the given linear precedence on the set of the floating jobs. First problem is NP-hard and we devise a heuristic procedure to the problem based on the transportation problem and matching problem. The second problem can be solved in polynomial time by the shortest path method. The algorithm works in iterative manner. One step is composed of two phases. In the first phase, we solve the constrained bin packing problem. In the second phase, the shortest path problem is solved using the phase 1 result. The result of the phase 2 is used as an input to the phase 1 problem at the next step. We test the proposed algorithm on the set of real data found in the washing machine assembly line.

• 대한안전경영과학회지
• /
• 제4권4호
• /
• pp.129-136
• /
• 2002

Utilization rate for the restrictive gate and required time and walking distance to board are to be a measure for the gate management and passenger's convenience estimation. So, the main purpose of the gate management are maximization of utilization rate and increment of airport terminal user's convenience through the efficient gate management. This study intends to maximize the utilization rate on usable gates and minimize the passenger's working distance in terminal by concerning about layout, terminal configuration, local passenger of the airport and formulate the gate assignment problem with integer linear programming problem. Then we obtained solution using optimization software LINGO and analyzed that maximize the number of assignment flights and minimize the passenger's walking distance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.884-889
• /
• 1989

In this paper, a new procedure for selecting weighting matrices in linear discrete time quadratic optimal control problem (LQ-problem) is proposed. In LQ-problems, the quadratic weighting matrices are usually decided on trial and error in order to get a good response. But using the proposed method, the quadratic weights are decided in such a way that all poles of the closed loop system are located in a desired region for good responses as well as for stability and values of the quadratic cost function are kept less then a specified value.

• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.57-64
• /
• 2016

This paper deals with the PCB assembly time minimization problem that the PAP (pick-and-placement) machine pickup the K-weighted group of N-components, loading, and place into the PCB placement location. This problem considers the rotational turret velocity according to component weight group and moving velocity of distance in two component placement locations in PCB. This paper suggest heavy-weight component group first pick-and-place strategy that the feeder sequence fit to the placement location Hamiltonean cycle sequence. This algorithm applies the quadratic assignment problem (QAP) that considers feeder sequence and location sequence, and the linear assignment problem (LAP) that considers only feeder sequence. The proposed algorithm shorten the assembly time than iATMA for QAP, and same result as iATMA that shorten the assembly time than ATMA.

• Management Science and Financial Engineering
• /
• 제15권1호
• /
• pp.51-69
• /
• 2009

A network model and a Genetic Algorithm (GA) is proposed to solve the simultaneous estimation of the trip distribution and traffic assignment from traffic counts in the congested networks in a logit-based Stochastic User Equilibrium (SUE). The model is formulated as a problem of minimizing a non-linear objective function with the linear constraints. In the model, the flow-conservation constraints are utilized to restrict the solution space and to force the link flows become consistent to the traffic counts. The objective of the model is to minimize the discrepancies between two sets of link flows. One is the set of link flows satisfying the constraints of flow-conservation, trip production from origin, trip attraction to destination and traffic counts at observed links. The other is the set of link flows those are estimated through the trip distribution and traffic assignment using the path flow estimator in the logit-based SUE. In the proposed GA, a chromosome is defined as a real vector representing a set of Origin-Destination Matrix (ODM), link flows and route-choice dispersion coefficient. Each chromosome is evaluated by the corresponding discrepancies. The population of the chromosome is evolved by the concurrent simplex crossover and random mutation. To maintain the feasibility of solutions, a bounded vector shipment technique is used during the crossover and mutation.

• Journal of Communications and Networks
• /
• 제12권3호
• /
• pp.246-252
• /
• 2010

A binary linear integer program is formulated for the problem of expanding the capacity of a fiber optic network and routing the traffic to deliver new interactive multimedia services. A two-phase Lagrangian dual search procedure and a Lagrangian heuristic are developed. Computational results show superior performance of the two-phase subgradient optimization compared with the conventional one-phase approach.

• 한국국방경영분석학회지
• /
• 제23권1호
• /
• pp.14-24
• /
• 1997

This study is to develop an optimal surveillance units assignment model in order to obtain the maximized surveillance efficiency with the limited surveillance units. There are many mathematical models which deal with problems to assign weapons such as aircrafts, missiles and guns to targets. These models minimize the lost required to attack, the threat forecast from the enemy, or both of them. However, a problem of the efficient assignment of surveillance units is not studied yet, nevertbless it is important in the battlefield surveillance system. This paper is concerned with the development of the optimal surveillance units assignment model using integer programming. An optimal integer solution of the model can be obtained by using linear programming and branch and bound method.