• 한국통신학회논문지
• /
• 제22권2호
• /
• pp.318-324
• /
• 1997

Chua 회로는 간단한 전기 및 전자 회로를 구성하여 카오스 현상을 나타내는 회로로 자율, 3차계, 가역성(Reciprocal)이며 1개의 비션형 소자인 3구분 선형 저항과 4개의 선형 소자인 (R, L, $C_1,\;C_2$)로 구성되는 발진회로이다. 본 논문에서는 Chua 회로의 병렬 LC 공진기를 단락하여 시간 지연을 갖는 무손실 전송선로로 치환하고 특성 곡선법을 써서 파라미터 변화에 의한 카오스 운동과 주기운동이 있음을 위상공간과 분기도(Bifurcation diagram)로 확인 하였으며 무손실 전송선로가 원래의 Chua 회로와 유사한 어트렉터가 존재함을 확인하였다.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.241-250
• /
• 2000

Chua 회로는 어트렉터와 다양한 분기를 나타내는 간단한 전자 회로로 2개의 캐패시터, 인덕터, 선형 저항 그리고 비선형 저항으로 구성되어 있다. 본 논문에서는 두 개의 동일한 Chua 회로를 이용하여 송신부와 수신부를 구성하고 이 사이에 등가 손실 전송선로를 카오스 동기화 및 암호화 통신 방법에 대하여 연구하였다. 손실 등가 전송 시스템의 동기화는 결합 동기 이론을 적용하기 곤란하기 때문에 구동동기 이론과 결합 동기 이론을 결합한 구동-결합 동기 이론을 제안하였다. 두 개의 동일한 Chua 회로에 등가 손실 전송 선로를 두어 전송로를 구성한 후 송신부와 전송선로 사이는 구동-결합 동기 이론을, 전송선로와 수신부 사이는 결합 동기 이론을 적용한 동기화 방법을 제시하였다. 손실 등가 전송 선로를 가진 Chua 회로의 카오스 암호화 방법은 송신부에서 카오스 신호화 정보 신호를 가산기를 이용하여 합성한 후 수신부에서 이들 신호를 분리하는 복조 방법을 제안하였다.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.353-359
• /
• 2009

This paper proposes a novel technique for calculating the security costs that properly includes ramping constraints in the operation of a deregulated power system. The ramping process is modeled by a piecewise linear function with certain assumptions. During this process, a ramping cost is incurred if the permissible limits are exceeded. The optimal production costs of the power producers are calculated with the ramping cost included, considering a time horizon with N-1 contingency cases using contingency constrained optimal power flow (CCOPF), which is solved by the primal-dual interior point method (PDIPM). A contingency analysis is also performed taking into account the severity index of transmission line outages and its sensitivity analysis. The results from an illustrative case study based on the IEEE 30-bus system are analyzed. One attractive feature of the proposed approach is that an optimal solution is more realistic than the conventional approach because it satisfies physical constraints, such as the ramping constraint.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.1965-1970
• /
• 2016

This paper studies generator rescheduling technique for congestion management in power system with wind farms. The proposed technique is formulated to minimize the rescheduling cost of conventional and wind generators to alleviate congestion subject to operational line overloading. The generator rescheduling method has been used with incorporation of wind farms in the power system. The locations of wind farms are selected based upon power transfer distribution factor (PTDF). Because all generators in the system do not need to participate in congestion management, the rescheduling has been done by generator selection based on the proposed generator sensitivity factor (GSF). The selected generators have been rescheduled using linear programming(LP) optimization techniques to alleviate transmission congestion. The effectiveness of the proposed methodology has been analyzed on IEEE 14-bus systems.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권10호
• /
• pp.480-488
• /
• 2001

This paper presents a technique that can obtain an optimal solution for the Security-Constrained Economic Dispatch (SCED) problems using the Interior Point Method (IPM) while taking into account of the power flow constraints. The SCED equations are formulated by using only the real power flow equations from the optimal power flow. Then an algorithm is presented that can linearize the SCED equations based on the relationships among generation real power outputs, loads, and transmission losses to obtain the optimal solutions by applying the linear programming (LP) technique. The objective function of the proposed linearization algorithm are formulated based on the fuel cost functions of the power plants. The power balance equations utilize the Incremental Transmission Loss Factor (ITLF) corresponding to the incremental generation outputs and the line constraints equations are linearized based on the Generalized Generation Distribution Factor (GGDF). Finally, the application of the Primal Interior Point Method (PIPM) for solving the optimization problem based on the proposed linearized objective function is presented. The results are compared with the Simplex Method and the promising results ard obtained.

• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.430-436
• /
• 1988

LSF(Line Spectral Frequency) derived from LPC has known as a very useful transmission parameter of speech signals, for it has a good linear interpolation characteristics and a low spectrum distortion at low bit rates coding. This paper presents that it is possible to extract directly the formant frequencies of speech signals from LSF parameter without application of FFT algorithm by comparing the distribution of LSF parameter with the frequency distribution of analysis filter. This paper suggests the advanced algorithm that results in improving the speed of convergence at analytic solution method. Also, for the flexibility of parameters, the process that transforms from LSF to LPC is presented.

• 한국전자파학회논문지
• /
• 제23권9호
• /
• pp.1048-1057
• /
• 2012

본 논문에서는 새로운 소형 이중 대역 비균등 전력 분배기를 제안한다. 기존의 1:2 비균등 Wilkinson 전력 분배기에서 ${\lambda}$/4 길이의 분기 선로 대신 CRLH 위상천이용 전송선을 사용하여 전체 구조의 물리적 크기를 줄인다. 메타 재질 구조의 비선형 분산 특성을 이용하여 비균등 분기선들이 $f_1$, $f_2$에서 각각 $+90^{\circ}$, $-90^{\circ}$의 위상이 나타나는 이중 대역 특성을 갖도록 설계한다. 설계 방법의 타당성 확인을 위해, 등가 모델, 3차원 모의실험의 성능과 함께 CRLH의 특성인 분산도가 제시된다. 모의실험 결과와 측정 결과를 비교하였으며, 제안 기법의 소형화 효과가 논의된다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 춘계학술대회 학술발표 논문집
• /
• pp.166-169
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcati on and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuitsare proposed and a transmission secure communications are investigated. A secure communication method in which the desired information signal is synthesized with the chaos signal created by the Chua's circuit is proposed and information signal is demodulated also using the Chua's circuit. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the power lime.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.209-215
• /
• 2001

In this paper a method for analysis and modelling of coplanar transmission interconnect lines that are placed on top of silicon-silicon oxide substrates is presented. The potential function is expressed by series expansions in terms of solutions of the Laplace equation for each homogeneous region of layered structure. The expansion coefficients of different series are related to each other and to potentials applied to the conductors via boundary conditions. In the plane of conductors, boundary conditions are satisfied at $N_d$ discrete points with $N_d$ being equal to the number of terms in the series expansions. The resulting system of inhomogeneous linear equations is solved by matrix inversion. No iterations are required. A discussion of the calculated line admittance parameters as functions of width of conductors, thickness of the layers, and frequency is given. The interconnect capacitance and conductance per unit length results are given and compared with those obtained using full wave solutions, and good agreement have been obtained in all the cases treated

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.623-625
• /
• 2000

For the finite element analysis of highly saturated rotating machines involving rotation of a rotor such as dynamic analysis. cogging torque analysis and etc, so much time is needed because a new system matrix equation should be solved for each iteration and time step. It is proved in this paper that. in linear systems. the computational time can be greatly reduced by using the domain decomposition method (DDM). In nonlinear systems. however. this advantage vanishes because the stiffness matrix changes at each iteration especially when using the Newton-Raphson (NR) method. The transmission line modeling (TLM) method resolves this problem because in TLM method the stiffness matrix does not change throughout the entire analysis. In this paper, a new technique for FEA of rotating machines including rotation of rotor and non-linearity is proposed. This method is applied to a test problem. and compared with the conventional method.