• 한국의학물리학회지:의학물리
• /
• 제4권1호
• /
• pp.55-71
• /
• 1993

Measured and calculated the TMR and SMR factors from percent depth dose underpartial attenuators which cover the whole part of the radiation beam with variousfilter thickness from 0 to 50 mm. This study was performed for x-ray beams generated with a 6 MV linear acceleratorat source to surface distance of 100cm in a water phantom for Lipowitz metal. TMR(0,d,t) was derived from non-linear polynomial regression with field sizedifferencies and a given filter thickness. In this experiments, the TMR(0,10,50) of 50mm of filter thickness was showed13.6 % higher than that of open field and SMR(5,10,50) was 38.5% smaller than thatof open field in same depth.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.324-329
• /
• 2002

In this paper, the guaranteed cost filtering design method for linear time delay systems with convex bounded uncertainties in discrete-time case is presented. The uncertain parameters are assumed to be unknown but belonging to known convex compact set of polytotype less conservative than norm bounded parameter uncertainty. The main purpose is to design a stable filter which minimizes the guaranteed cost. The sufficient condition for the existence of filter, the guaranteed cost filter design method, and the upper bound of the guaranteed cost are proposed. Since the proposed sufficient conditions are LMI(linear matrix inequality) forms in terms of all finding variables, all solutions can be obtained simultaneously by means of powerful convex programming tools with global convergence assured. Finally, a numerical example is given to check the validity of the proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.151-160
• /
• 2017

This paper presents a new technique of reference current generator based on Kalman filter (KF) estimator for three-phase shunt active power filter (APF). The stationary reference frame (d-q algorithm) is used to transform the load currents into DC component. The harmonics of load currents are extracted and the three-phase reference currents are generated using KF estimator. The work is simulated using Matlab/Simulink platform. To validate the simulation results, an experimental test-rig have been perform using real-time control dSPACE DS1104. In addition, hysteresis current control was used to generate the switching signal for the correction of the harmonics in the system. The non-linear load were constructed with three-phase rectifier which connected in series with inductor and parallel with resistor and capacitor. The results shows that the new technique of shunt APF embedded with KF is proven to eliminate the harmonics created by the non-linear load with some improvement on the total harmonics distortion (THD).

• 전기학회논문지
• /
• 제61권2호
• /
• pp.276-283
• /
• 2012

In this paper, a practical quasi-optimal DOA(direction of arrival) estimator is proposed in order to develop a one-axis gimbaled ultrasonic source tracker for mobile robot applications. With help of the gimbal structure, the ultrasonic moving source tracking problem can be simply reduced to the DOA estimation. The DOA estimation is known as one of the representative long-pending nonlinear filtering problems, but the conventional nonlinear filters might be restrictive in many actual situations because it cannot guarantee the reliable performance due to the use of nonlinear signal model. This motivates us to reformulate the DOA estimation problem in the linear robust state estimation setting. Based on the assumption that the received ultrasonic signals are noisy sinusoids satisfying linear prediction property, a linear uncertain measurement model is newly derived. To avoid the DOA estimation performance degradation caused by the stochastic parameter uncertainty contained in the linear measurement model, the recently developed NCRKF (non-conservative robust Kalman filter) scheme [1] is utilized. The proposed linear DOA estimator provides excellent DOA estimation performance and it is suitable for real-time implementation for its linear recursive filter structure. The effectiveness of the suggested DOA estimation scheme is demonstrated through simulations and experiments.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 춘계학술대회 학술발표 논문집 제16권 제1호
• /
• pp.245-248
• /
• 2006

A particle filter is one of the most famous filters. The reason why the particle filter is widely used is that particle deals with the state estimation problem for not only linear models with Gaussian noise but also the non-linear models with non-Gaussian noise and it receives great attention from many engineering fields. In the point of view state estimator, particle filter is feedforward observer. According to the characteristic of dynamic system, the feedforward observer can estimate real state. However, the speed of convergence of feedforward observer between the actual state and the estimated state cannot be satisfied. Since the particle filter is a sort of feedforward observer, the convergence speed of particle filter is slow, and the particle filter cannot estimate actual state like particle collapse problem. In order to overcome the limitation of particle filter as a kind of feedfoward estimator, we propose a new particle filter which has feedback term, called particle filter with feedback. Our proposed method is analyzed theoretically and studied by computer simulation. Comparisons are made with other filtering mehod.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.284-290
• /
• 2012

This paper addresses a new passive target tracking problem using the range differences measured by cooperative UAVs. In order to solve the range difference based passive target tracking problem within the framework of linear robust state estimation, the uncertain linear measurement model which contains the stochastic parameter uncertainty is derived by using the noisy range difference measurements. To cope with the performance degradation due to the stochastic parameter uncertainty, the recently developed non-conservative robust Kalman filtering technique [1] is applied. For the cruciform formation flying UAVs, the relationship between the target tracking performance and the measurement errors is quantitatively analyzed. The proposed filter has practical advantages over the classical nonlinear filters because, for its recursive linear structure, it can provide satisfactory convergence properties and is suitable for real-time multiple UAVs applications. Through the simulations, the usefulness of the proposed method is demonstrated.

• Journal of Communications and Networks
• /
• 제9권1호
• /
• pp.75-83
• /
• 2007

Orthogonal frequency division multiplexing (OFDM) systems with multiple transmit antennas can exploit space-time block coding on each subchannel for reliable data transmission. Spacetime coded OFDM systems, however, are very sensitive to time variant channels because the channels need to be static over multiple OFDM symbol periods. In this paper, we propose to mitigate the channel variations in the frequency domain using a linear filter in the frequency domain that exploits the sparse structure of the system matrix in the frequency domain. Our approach has reduced complexity compared with alternative approaches based on time domain block-linear filters. Simulation results demonstrate that our proposed frequency domain block-linear filter reduces computational complexity by more than a factor of ten at the cost of small performance degradation, compared with a time domain block-linear filter.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.165-170
• /
• 1995

In this paper, it is attempted to apply the adaptive digital signal processing to compensate for a linear distortion of a loudspeaker and implement a real time hardware for that purpose. The real time system is implemented by using the DSP56001, a general purpose signal processor, as a host processor and the DSP56200, a cascadable adaptive FIR filter peripheral chip, as an adaptive digital filter. The system has 1000 taps at a 44.1kHz. After inverse modeling of under_compensation_speaker, the system reduces loudspeaker's linear distortions by pre-processing an input audio signal to loudspeaker. The experiment shows satisfactory results; after adaption with white noise as input signal for 60sec, the flat amplitude and linear phase frequency characteristics is found to lie over a wide frequency range of 100Hz to 20kHz.

• 대한전자공학회논문지SD
• /
• 제44권7호통권361호
• /
• pp.37-44
• /
• 2007

GSM 셀룰러폰을 위한 저전압 고선형 바이폴라 OTA와 이룡 이용한 IF bandpass filter(BPF)를 제안하였다. OTA는 저전압 선형 transconductor, translinear 전류이득 셀, 그리고 3개의 전류 미러로 구성 되어있다. BPF는 2개의 동일한 2차 BPF를 직렬 연결한 형태인데, 2차 BPF는 저항과 커패시터 그리고 2개의 OTA와 커패시터로 된 ground simulated inductor로 구성되어 있다. 8GHz bipolar transistor-array를 사용한 SPICE 시뮬레이션에서는 1mS의 transconductance의 OTA가 ${\pm}2%$ 이하의 선형 오차와 ${\pm}2\;V$에서 ${\pm}0.65\;V$이상의 선형범위를 가짐을 보여준다. transconductor의 온도계수는 $-90ppm/^{\circ}C$이하이다. BPF는 중심 주파수는 $85MHz\;Q$값은 80이 되도록 설계하였다. 중심주파수에서의 온도계수는 $-182ppm/^{\circ}C$이고, BPF의 소비전력은 128mW 이다.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.618-624
• /
• 2004

This paper presents a delay dependent fuzzy H_\infty$ filter design method for delayed fuzzy dynamic systems. Using delay-dependent Lyapunov function, the global exponential stability and H_\infty$ performance problem are discussed. A sufficient condition for the existence of fuzzy filter is presented in terms of linear matrix inequalities(LMIs). The filter design utilize the concept of parallel distributed compensation. And the filter gains can also be directly obtained from the LMI solutions. A simulation example is given to illustrate the design procedures and performance of the proposed methods.