• 대한전자공학회논문지TC
• /
• 제48권9호
• /
• pp.59-64
• /
• 2011

초광대역 레이더는 높은 분해 능력으로 인해 단거리 차량용 레이더로 주목받고 있다. 차량으로부터 반사된 레이더 신호는 "clutter"라는 원하지 않는 반사 신호를 갖게 되어, 목표물을 검출하는데 어려움을 갖게 된다. 그러므로 목표물에서 반사된 신호로부터 보다 확실하게 검출하기 위하여 레이더 검출기를 개발할 필요가 있다. 본 논문에서는 log-normal clutter 환경에서 다양한 평균과 분산에서 최적인 검출기를 구하였다. 비동기 방식의 검출기로 자승 검출기와 선형 검출기, 로그 검출기 등을 분석하였다. 본 논문에서는 컴퓨터 시뮬레이션을 통해 검출기의 성능을 분석하여, 차량용 레이더로 최적인 검출기를 구하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.506-509
• /
• 2009

This paper studies about reducing the complexity of ML detection in MIMO/V-blast system, based on MMSE and ZF linear detectors. Beforehand, the receiver detects the signal using the linear detector such as ZF or MMSE. Moreover, the next step is to assess whether the signal is reliable or not by verifying the reliability condition, if the latter is reliable then it is the output if not it has to be detected by the advanced detector until the reliability condition is verified.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.175-180
• /
• 2012

This paper presents a blind watermark detection scheme for an additive watermark embedding model. The proposed estimation-correlation-based watermark detector first estimates the embedded watermark by exploiting non-Gaussian of the real-world audio signal and the mutual independence between the host-signal and the embedded watermark and then a correlation-based detector is used to determine the presence or the absence of the watermark. For watermark estimation, blind source separation (BSS) based on independent component analysis (ICA) is used. Low watermark-to-signal ratio (WSR) is one of the limitations of blind detection with the additive embedding model. The proposed detector uses two-stage processing to improve the WSR at the blind detector; the first stage removes the audio spectrum from the watermarked audio signal using linear predictive (LP) filtering and the second stage uses the resulting residue from the LP filtering stage to estimate the embedded watermark using BSS based on ICA. Simulation results show that the proposed detector performs significantly better than existing estimation-correlationbased detection schemes.

• 연구논문집
• /
• 통권32호
• /
• pp.65-76
• /
• 2002

The intensity of x-ray or gamma-ray is attenuated according to density and thickness of the transmitted medium. In this study, by using this principle, on-line real-time radiometric system was developed using a 128 channels linear array of solid state detectors to measure wall thickness of insulated piping system. This system uses a Ir-192 as a gamma ray source and detector is composed of BGO scintillator and photodiode. Ir-192 gamma ray source and linear detector array mounted on a computer controlled robotic crawler. The Ir-192 gamma ray source is located on one side of the piping components and the detector array on the other side. The individual detectors of the detector array measure the intensity of the gamma rays after passing through the walls and the insulation of the piping component under measurement. The output of the detector array is amplified by amplifier and transmitted to the computer. This system collects and analyses the data from the detector array in real-time. The maximum measurable length of pipe is 120cm/mm. in the case of 1mm scanning interval.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.73-76
• /
• 2000

A Scene Based Technique(SBT) that corrects linear array infrared detector's nonuniformity is proposed. Basically, this technique dispenses with using temperature references on a linear array infrared detector. To correct the nonuniformity of infrared images, we use three methods. Firstly, we detect bad channels by using the information which is cumulated all the same line pixels. Secondly, a variable window method is applied to compensate more accurately. Thirdly, an adaptive method which updates gain and offset coefficient is used only on a stationary region. These results are demonstrated on a computer simulation with various images. As a result, the nonuniformity is corrected completely, so that images are enhanced and PSNR(peak signal to noise ratio) is improved much.

• 한국화재소방학회논문지
• /
• 제30권2호
• /
• pp.19-26
• /
• 2016

본 논문은 국내 주요 시설 및 국가 기반 시설로 변화되고 있는 터널 및 지하 공동구의 조기화재탐지설비시스템 설치에 이용되고 있는 광센서 선형 화재 감지 시스템에 대한 특성 분석을 목적으로 연구를 수행하였다. 연구 방법으로는 저온 환경인 $-20^{\circ}C$에서 5일간 5가지의 열감지기 중에서 작동 여부를 확인한 결과 광센서 선형 감지기만 작동하는 것을 알 수 있었다. 또한 터널과 같은 풍속이 발생되는 곳을 가정하여 축소 모형 터널을 제작하여 0 m/s와 1 m/s를 변수로 하여 광센서 선형 감지기의 작동 특성을 분석하였다. 그 결과로서 광센서 선형 감지 시스템의 온도 변화에 있어서는 풍속이 없을 때인 0 m/s 때의 값이 높게 나타나는 것을 알 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.615-618
• /
• 2006

본 논문에서는 직접 변환 방식인 six-port의 RF 출력 신호를 검파하고 요구 대역폭에서 입력 주파수 신호에 대한 진폭 및 위상차를 선형적으로 출력하는 광역 power detector를 설계 제작한다. Six-port 출력단에 접속되는 power detector는 높은 정합도를 갖고 반사파로 인한 Six-port 간 위상 불일치를 방지하고, 넓은 대역폭에서 낮은 VSWR을 유지하여야 하는 광역 특성을 갖는 power detector 설계가 필요하다. L-band의 강제 정합 회로와 Ku-band의 정합 회로 그리고 isolator와 정합 회로를 갖는 power detector 회로를 구성하여 요구하는 Six-port 형 power detector 성능을 평가한다.

• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.43-47
• /
• 2005

We have developed a small bore x-ray CT for small animal imaging with a linear x-ray detector array and small-scale slip rings. The linear x-ray detector array consists of 1024 elements of 400□m×400□m with a gadolinium oxysulfide (GOS) scintillator on top of them. To avoid use of expensive large diameter slip rings for projection data transmission from the X­ray detector to the image reconstruction system, we used the wireless LAN technology. The projection data are temporally stored in the data acquisition system residing on the rotating gantry during the scan and they are transmitted to the image reconstruction system after the scan. With the wireless LAN technology, we only needed to use small-scale slip rings to deliver the AC electric power to the X-ray generator and the power supply on the rotating gantry. The performances of the small animal CT system, such as SNR, contrast, and spatial resolution, have been evaluated through experiments using various phantoms. It has been experimentally found that the SNR is almost linearly proportional to the tube current and tube voltage, and the minimum resolvable contrast is less than 30 CT numbers at 40kVp/3.0㎃. The spatial resolution of the small animal CT system has been found to be about 0.9Ip/㎜. Postmortem images of a piglet is also presented.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.411-414
• /
• 2002

The CdTe semiconductor detector has a higher detection efficiency for x-rays and $\square$amma rays and a wider energy band gap compared with Si and Ge semiconductor detectors. Therefore, the size of the detector element can be made small, and can be operated at room temperature. The interaction between a CdTe detector and incident x-rays is mainly photoelectric absorption in the photon energy range of up to 100 keV. In this energy range, Compton effects are almost negligible. We have developed a 256 channel CdTe array detector system for monochromatic x-ray CT using synchrotron radiation. The CdTe array detector system, the element size of which is 1.98 mm (h) x 1.98 mm (w) x 0.5 mm (t), was operated in photon counting mode. In order to improve the spatial resolution, we tilted the CdTe array detector against the incident parallel monochromatic x-ray beam. The experiments were performed at the BL20B2 experimental hutch in SPring-8. The energy of incident monochromatic x-rays was set at 55 keV. Phantom measurements were performed at the detector angle of 0, 30 and 45 degrees against the incident parallel monochromatic x-rays. The linear attenuation coefficients were calculated from the reconstructed CT images. By increasing the detector angle, the spatial resolutions were improved. There was no significant difference between the linear attenuation coefficients which were corrected by the detector angle. It was found that this method was useful for improving the spatial resolution in a parallel monochromatic x-ray CT system.

• ETRI Journal
• /
• 제33권5호
• /
• pp.752-758
• /
• 2011

This paper presents a clock and data recovery circuit that supports dual data rates of 5.4 Gbps and 3.24 Gbps for DisplayPort v1.2 sink device. A quarter-rate linear phase detector (PD) is used in order to mitigate high speed circuit design effort. The proposed linear PD results in better jitter performance by increasing up and down pulse widths of the PD and removes dead-zone problem of charge pump circuit. A voltage-controlled oscillator is designed with a 'Mode' switching control for frequency selection. The measured RMS jitter of recovered clock signal is 2.92 ps, and the peak-to-peak jitter is 24.89 ps under $2^{31}-1$ bit-long pseudo-random bit sequence at the bitrate of 5.4 Gbps. The chip area is 1.0 mm${\times}$1.3 mm, and the power consumption is 117 mW from a 1.8 V supply using 0.18 ${\mu}m$ CMOS process.