• 제목/요약/키워드: Linear Demand Function

검색결과 84건 처리시간 0.037초

단일 저수지의 위험도 평가기준을 고려한 가뭄대비 Hedging Rule 개발 (Development of Hedging Rule for Drought Management Policy Reflecting Risk Performance Criteria of Single Reservoir System)

  • 박명기;김재한;정관수
    • 한국수자원학회논문집
    • /
    • 제35권5호
    • /
    • pp.501-510
    • /
    • 2002
  • 가뭄상황 또는 가뭄이 임박한 상황에서의 저수지 운영은 수요관리개념(단계별 급수)에서의 운영률을 필요로 한다. 본 연구는 저수지 갈수대응 차원에서 수문상황에 따른 단계별 방류량 감소를 고려할 수 있는 heding 효과를 고려한 단일 저수지 운영률 개발을 목표로 하였다. hedging 효과를 고려한 최적운영률 결정에는 혼합정수계획기법이 적용되었으며, 정식화단계에는 Shih 등(1994)의 hedging효과를 고려한 운영률을 개선하여 정식화 요소에 Hashimoto 등(1982)의 위험도 평가기준을 포함시켰다. 또한 hedging항의 비선형 해석을 수행하기 위하여 축차 선형계획기법을 도입ㆍ정식화에 적용하였다. 본 hedging운영률의 적용결과 대청다목적댐에 대하여 hedging 매개변수론 산정하였으며, 이를 통하여 각 월별 갈수대응 제한공급 시점 저수량(trigger volume)을 산정할 수 있었다.

Hedging Rule을 이용한 댐 연계 운영 최적화: 한강수계 사례연구 (Optimization of Multi-reservoir Operation with a Hedging Rule: Case Study of the Han River Basin)

  • 류관형;정건희;이정호;김중훈
    • 한국수자원학회논문집
    • /
    • 제42권8호
    • /
    • pp.643-657
    • /
    • 2009
  • 홍수기에 집중되는 유출량을 갈수기에 적절히 활용하기 위한 대표적인 구조물이 댐이다. 제한된 용수공급량을 적절히 분배해 용수수요량을 만족시키면서 미래 갈수기시 용수공급을 대비하여 댐 저류량을 조절하는 것이 댐 운영의 중요한 목적 중 하나이다. 본 연구에서는 갈수 시 댐 저류량에 따라 댐 계획방류량을 일정비율 줄여주는 Hedging Rule을 5단계로 적용하여 댐의 상시만수위 저류량에 대한 실제 저류량의 편차, 수요에 대한 용수공급 부족량, 그리고 하천유지용수 부족량을 목적함수로 하여 혼합정수 선형계획법(MILP, Mixed Integer Linear Programming)으로 저수지 연계운영모형을 구성하였다. 한강수계의 다목적댐인 충주, 횡성, 소양강 댐과 용수전용댐인 광동 댐, 그리고 발전용 댐이지만 비교적 큰 저류용량을 가진 화천 댐을 연계 운영 대상으로 하여, 수자원장기종합계획에 사용된 2003년 유출량 및 수요량 자료와 댐 운영 실무편람의 댐 계획방류량 자료를 10일 단위로 입력하여 GAMS/CPLEX를 이용해 최적화하였다. 그 결과 생공용수 수요량 99.99%, 농업용수 수요량 99.91%, 그리고 하천유지용수 수요량 100.00%를 충족시키면서도, 실제 2003년 운영자료에 비교하여 댐 저류효율이 10.04% 개선된 결과를 도출하였다.

선로용량한계를 고려한 단기 발전계획 (Short-Term Generation Scheduling Considering Transmission Line Capacity Limits)

  • 김준현;송현선;유인근
    • 대한전기학회논문지
    • /
    • 제35권12호
    • /
    • pp.594-602
    • /
    • 1986
  • This paper proposes an effective algorithm for short-term generation scheduling for the purpose of economic and secure operation of thermal power systems. Especially, in the procedure of solution by Dynamic Programming, Linear Programming is introduced to promote the possibility of optimal solution and the security of power systems, and evaluation of security function is improved by the application of seven step approximation of normal distribution. Several necessary considerations, that is, time dependent start-up and constant down cost of generating units, demand and spinning reserve constraints, minimum up and sown time constraints, the number of possible start-up of a generating unit in a d and the number of generating units which can be started up at the same time at the same bus, are also incoporated to elevate the usability and flexibility of the algorithm. Finally, the effectiveness of the proposed algorithm has been demonstrated by applying to the 6-gen. 21-bus model power system.

  • PDF

Economic Analysis of the Receiver Pays Principle

  • Kim, Jeong-Yoo;Lim, Yoon-Sung
    • 한국기술혁신학회:학술대회논문집
    • /
    • 한국기술혁신학회 1999년도 춘계학술대회
    • /
    • pp.117-149
    • /
    • 1999
  • This paper is to examine the effect of the receiver pays principle (RPP) on the calling price, social welfare and interconnection charge. A significant trouble with introducing this system in telecommunications pricing is the possibility that the receiving party may refuse to receive a call if the charge he has to bear is very high. We find the condition for no calls to be refused and show that the profit maximizing prices charged to the calling party and the receiving party must satisfy this condition. We demonstrate that the calling price under RPP must be lower than the price under the caller pays principle (CPP), that the profit of a firm will be increased under RPP, but that the consumer surplus will not necessarily be increased under RPP despite the lowered calling price. Also, we show that, if the demand function is linear, the reciprocal interconnection charge under RPP is higher than that under CPP.

  • PDF

7축 모듈라형 공기압 매니퓰레이터 개발 (Seven axis modular type pneumatic manipulator development)

  • 김동수;김용채;김형의
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.968-973
    • /
    • 1991
  • Seven axis modular type pneumatic manipulator is composed of electro-pneumatic automation system which contributes to factory automation by performing loading & unloading process successively which is simple routine work of dealing item of machine tool, catapult, assembly machine, welding machine and so on. In this study, we obtained soft and quick movement in a large space and good reliability motion of various function by combining several actuators which perform rotation movement as well as linear movement at the same time. Gripper which apply to rotary sensor transmitted a structure to demanded position. This development item of 5kgf load prevent stick-slip phenomena of stroke end by designing high cushion internal. We develope flexible manipulator which conforms to demand of user by applying multiple sequence program.

  • PDF

LP 모델에 의(依)한 Product Mix 실시사례(實施事例) (A Case Study on the Method for Finding the Product Mix by the Use of LP Model)

  • 이순요
    • 대한산업공학회지
    • /
    • 제1권1호
    • /
    • pp.41-56
    • /
    • 1975
  • In the past the pattern of business down-trend usually appeared in the form of, first, decrease in facility investment, then decrease in inventory level, followed by reduced level of consumption. But the pattern nowadays is becoming just the opposite, that is, first, consumption decrease, then inventory level increase, followed by restriction of facility investment. Also in the past, the greater effort was placed in strengthening of hardware areas through optimization and modernization of production means on the premise of sales. But lately software areas take most of the main effort to establish production mean with sales as its objective. Under these circumstances one of the real problems facing production activities today is the conflicting relationship between sales and production functions. This occurs due to differences of their view points. Then, in order to achieve maximum profit at the least cost, which is the ultimate objective of a production activity, the need arises to effectively coordinate sales demand and plant production capacity. For this purpose strong control means and function must be devised. In our case study example we illustrate a management technique for a combined planning function, of optimal coordination of product mixes utilizing a computerized linear programming model as control means of attaining maximum profit. It is hoped that this example help achieve some of corporate objectives.

  • PDF

신규호에 대한 지체가 허용된 셀룰라 이동통신시스템에서 최적 호제어 연구 (Optimal Call Control Strategies in a Cellular Mobile Communication System with a Buffer for New Calls)

  • Paik, Chun-hyun;Chung, Yong-joo;Cha, Dong-wan
    • 한국경영과학회지
    • /
    • 제23권3호
    • /
    • pp.135-151
    • /
    • 1998
  • The demand of large capacity in coming cellular systems makes inevitable the deployment of small cells, rendering more frequent handoff occurrences of calls than in the conventional system. The key issue is then how effectively to reduce the chance of unsuccessful handoffs, since the handoff failure is less desirable than that of a new call attempt. In this study, we consider the control policies which give priority to handoff calls by limiting channel assignment for the originating new calls, and allow queueing the new calls which are rejected at their first attempts. On this system. we propose the problem of finding an optimal call control strategy which optimizes the objective function value, while satisfying the requirements on the handoff/new call blocking probabilities and the new call delay. The objective function takes the most general form to include such well-known performance measures as the weighted average carried traffic and the handoff call blocking probability. The problem is formulated into two different linear programming (LP) models. One is based on the direct employment of steady state equations, and the other uses the theory of semi-Markov decision process. Two LP formulations are competitive each other, having its own strength in the numbers of variables and constraints. Extensive experiments are also conducted to show which call control strategy is optimal under various system environments having different objective functions and traffic patterns.

  • PDF

이동단말기 카메라 자동 초점 조절 방식에 관한 연구 (A Study of Auto Focus Control Method for the Mobile Phone Camera)

  • 김갑용;김영길
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 추계종합학술대회
    • /
    • pp.1003-1006
    • /
    • 2005
  • 이동단말기에 적용되는 카메라의 단 초점에서 자동초점으로 적용이 점차 화대 되고 있다. 본 논문에서는 이동단말기에 적용되는 카메라에서의 자동초점기능을 구현하기 위한 기본 원리 및 실제 구현을 a적으로 하다. 자동초점을 위해서는 Image Sensor, Lens, Lens구동을 위한 CCM(Camera Control Module)이 필요한 구성이다 현재까지 적용되는 AF용 CCM에는 VCM방식과 Piezo 방식이 있다. 본 논문에서는 적용된 방식은 VCM적용 방식이다. Camera Control을 위해서 적용될 수 있는 MCU는 ISP(혹은 DSP)나 Base Band Core에서 직접 Control할 수 있겠다.

  • PDF

Stochastic analysis of the rocking vulnerability of irregular anchored rigid bodies: application to soils of Mexico City

  • Ramos, Salvador;Arredondo, Cesar;Reinoso, Eduardo;Leonardo-Suarez, Miguel;Torres, Marco A.
    • Earthquakes and Structures
    • /
    • 제20권1호
    • /
    • pp.71-86
    • /
    • 2021
  • This paper focuses on the development and assessment of the expected damage for the rocking response of rigid anchored blocks, with irregular geometry and non-uniform mass distribution, considering the site conditions and the seismicity of Mexico City. The non-linear behavior of the restrainers is incorporated to evaluate the pure tension and tension-shear failure mechanisms. A probabilistic framework is performed covering a wide range of block sizes, slenderness ratios and eccentricities using physics-based ground motion simulation. In order to incorporate the uncertainties related to the propagation of far-field earthquakes with a significant contribution to the seismic hazard at study sites, it was simulated a set of scenarios using a stochastic summation methods of small-earthquakes records, considered as Empirical Green's Function (EGFs). As Engineering Demand Parameter (EDP), the absolute value of the maximum block rotation normalized by the body slenderness, as a function of the peak ground acceleration (PGA) is adopted. The results show that anchorages are more efficient for blocks with slenderness ratio between two and three, while slenderness above four provide a better stability when they are not restrained. Besides, there is a range of peak intensities where anchored blocks located in soft soils are less vulnerable with respect to those located in firm soils. The procedure used in here allows to take decisions about risk, reliability and resilience assessment of different types of contents, and it is easily adaptable to other seismic environments.

감가상각모형의 유형화에 기초한 적용방안 (Implementation Strategy Based on the Classification of Depreciation Models)

  • 최성운
    • 대한안전경영과학회지
    • /
    • 제16권2호
    • /
    • pp.217-230
    • /
    • 2014
  • The purpose of this study is to develop the Generalized Depreciation Function (GDF) and Winfrey Depreciation Function (WDF) by reviewing methods for the depreciation accountings. The Depreciation Accounting Models (DAM), including straight-line model, declining-balance model, sum-of-the-year-digit model and sinking fund model presented in this paper, are reclassified into the charging pattern of increasing type, decreasing type and constant type. This paper also discusses the development of the GDFs based on convex type, concave type and constant type according to the demand pattern of product, frequency of plant usage, deterioration of time, relative inadequacy, Capital Expenditure (CAPEX) and Operating Expenditure (OPEX) of the Total Productive Maintenance (TPM). The WDFs presented in this paper depict a sudden degradation of plant performance by measuring the change of TPM activity at the midpoint of useful life of asset. The WDFs are classified into left-modal type, symmetrical type and right-modal type by varying the value of skewness and kurtosis. Moreover, three increasing patterns, such as convex, concave and linear types, are used in this paper to present the distinct identification of WFDs by using Instantaneous Depreciation Rate (IDR) in terms of Performance Depreciation Function (PDF) and Depreciation Density Function (DDF). In order to have better understanding of depreciation models, the numerical examples are used for evaluating the Net Operating Less Adjusted Tax (NOPLAT) and Economic Value Added (EVA). It is concluded that the depreciation models showing a large dispersion of EVA require the adjustment of NOPLAT and Invested Capital (IC) based on the objective cash basis and net operating activity for reducing the variation of EVA.