• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.230-233
• /
• 2006

In this study, the effects of residual stress induced by plastic injection molding process on the tensile behavior of plastic tensile test specimen were investigated. To manufacture plastic tensile test specimens, an injection mold based on the international standard system was designed and made. Cavity pressure and temperature sensors were installed inside of the presented mold to monitor pressure and temperature values during the cycle of injection molding. Injection molding simulation was performed with the same condition of experiment and linear structural tensile analysis was also performed with the initial condition of the residual stress. It was shown that the residual stress induced by injection molding has an effect on the experiment of tensile test and linear structural tensile simulation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.239-242
• /
• 2004

본 논문에서는 개방형 액체로켓엔진의 각 구성품에 대한 일반적인 수학적 비선형 모델을 먼저 작성하고, 액체로켓엔진의 동특성 경향 파악/안정성 판별을 위해 구성된 비선형 모델을 선형 모델(Laplace 변환)로 재구성하였으며, Matlab/Simulink을 통해 액체로켓엔진에 대한 전체 선형 모델을 구성하였다.

• 전자공학회논문지CI
• /
• 제43권1호
• /
• pp.1-8
• /
• 2006

본 논문은 의사난수발생기로 사용할 수 있는 산술 시프트 레지스터(ASR, Arithmetic Shift Register)를 제안한다. 산술 시프트 레지스터는 $GF(2^n)$상에서 0이 아닌 초기 값에 0 또는 1이 아닌 임의의 수 D를 곱하는 수열로 정의한다. 그리고 이를 본 논문에서는 ASR-D로 표현한다. $GF(2^n)$상에서 $'D^k=1'$ 되는 t가 $'t=2^n-1'$로 유일하게 되는 비복원다항식이 ASR-D의 특성다항식이며, ASR-D의 주기는 $'2^n-1'$로 최대주기를 가진다 갈로이 선형 궤환 시프트 레지스터는 $ASR-2^{-1}$에 해당한다. 그러므로 제안하는 산술 시프트 레지스터는 갈로이 선형 제환 시프트 레지스터를 일반화한 것이다. $GF(2^n)$상의 ASR-D의 선형복잡도는 $'n{\leq}LC{\leq}\frac{n^2+n}{2}'$으로 종래의 선형 궤환 시프트 레지스터와 비교하여 안정도가 높다. 제안한 산술 시프트 레지스터의 소프트웨어 구현은 종래의 선형 제환 시프트 레지스터에 비하여 효율적이며, 하드웨어 복잡도는 동일하다. 제안한 산술 시프트 레지스터는 종래의 선형 제환 시프트 레지스터와 같이 암호, 오류수정부호, 몬테카를로 적분, 데이터통신 등 여러 분야에서 폭 넓게 사용될 수 있다.

• 한국재료학회지
• /
• 제8권5호
• /
• pp.377-382
• /
• 1998

Ti[N ($C_{2}$$H_{5}$ $CH_{3}$)$_{2}$]$_{4}$ [tetrakis(ethylmethylammino)titanium.TEMAT]와 $NH_{3}$를 반응가스로 하여 각각 펄스(pulse) 형태로 시분할 주입되는 새로운 박막 증착방법(이하 Cycle-CVD라 함)을 이용하여 TiN박막이 $SiO_2$.기판위에 증착되었다.Cycle-CVD에서 반을로 내로 주입되는 반응가스와 Ar가스는 TEAM 펄스, Ar 펄스,$NH_{3}$펄스, Ar 펄스의 순서로 시분할주입되었고, 이렇게 차례대로 주입되는 4개의 펄스를 하나의 cycle로 규정하고, Cycle-CVD는 이러한 cycle이 연속하여 반복적으로 주입되도록 설계되었다. 기판온도가 $170^{\circ}C$-$210^{\circ}C$에서는 atomic layer deposition(ALD)특성을 보였고, $200^{\circ}C$에서 충분한 반응가스의 펄스시간 후에 cycle당 증착된 박막의 두께가 0.6nm/cycle로 포화되는 양상을 보여주었는데, 이는 cycle당 증착된 TiN 박막의 두께가 1.6 monolayer(ML)/cycle에 해당된다. 이와 같이 반등가스의 흡착을 이용ㅇ하여 TiN이 제한된 표면반응만에 의하여 ALD 기구에 의해 증착이 이루어지므로 TiN 박막의 두께는 단지 cycle 횟수만으로 정확하게 제어할 수 있었고, 우수한 step coverage 특성을 얻었다. 또한 반응가스간의 기상반응을 방지함으로써 입자의 발생을 억제할 수 있었고, 상대적으로 낮은 온도임에도 불구하고 4at% 이하의 낮은 탄소함량을 갖는 양호한 특성을 보여주었다.

• 유기물자원화
• /
• 제19권4호
• /
• pp.60-65
• /
• 2011

실록산은 유기규소화합물로서 혐기성소화조에서 생산되는 바이오가스로 휘발되며, 이러한 실록산은 바이오가스로 이용되는 가스 연소 엔진 고장의 원인이 된다. 따라서, 바이오가스 내의 실록산을 저감시킬 수 있는 방안이 필요하며 우선적으로 실록산의 발생특성에 대한 조사가 필요하다. 이에 본 연구는 음식물류폐기물폐수의 혐기성소화조에서 발생되는 바이오가스에 함유되어 있는 실록산의 농도 특성을 조사하였다. 총 실록산의 농도는 평균적으로 $9.5mg\;siloxane/m^3$로 나타났으며, 고리 구조 D4의 실록산 농도는 $4.0mg\;siloxane/m^3$로 가장 높게 나타났다. 고리구조 및 선형구조 실록산의 농도는 각각 D4>D5>D6 및 L4>L3>L5>L2의 순서로 나타났다. 1월 2월 및 3월의 실록산 농도 측정 결과에서 1월의 총 실록산 농도가 가장 낮게 나타났으며, 3월의 총 실록산 농도가 가장 높게 나타났다.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.5.1-5.14
• /
• 2023

Background: Perfluoroalkyl substances (PFAS) are chemicals widely used in various products in everyday life. Due to its unique strong binding force, the half-life of PFAS is very long, so bioaccumulation and toxicity to the human body are long-standing concerns. In particular, effects on kidney function have recently emerged and there are no studies on the effect of PFAS on kidney function through epidemiological investigations in Korea. From 2018 to 2020, the Korean National Environmental Health Survey (KoNEHS) cycle 4, conducted an epidemiological investigation on the blood concentration of PFAS for the first time in Korea. Based on this data, the relationship between PFAS blood concentration and kidney function was analyzed for adolescents. Methods: We investigated 5 types of PFAS and their total blood concentration in 811 middle and high school students, living in Korea and included in KoNEHS cycle 4, and tried to find changes in kidney function in relation to PFAS concentration. After dividing the concentration of each of the 5 PFAS and the total concentration into quartiles, multivariable linear regression was performed to assess the correlation with kidney function. The bedside Schwartz equation was used as an indicator of kidney function. Results: As a result of multivariable linear regression, when observing a change in kidney function according to the increase in the concentration of each of the 5 PFAS and their total, a significant decrease in kidney function was confirmed in some or all quartiles. Conclusions: In this cross-sectional study of Korean adolescents based on KoNEHS data, a negative correlation between serum PFAS concentration and kidney function was found. A well-designed longitudinal study and continuous follow-up are necessary.

• Journal of Astronomy and Space Sciences
• /
• 제29권2호
• /
• pp.103-113
• /
• 2012

The ButterStar Observatory at the Dongducheon High School has been working for photographic observations of the Sun since October 16, 2002. In this study, we observed the Sun at the ButterStar observatory for 3,364 days from October 16, 2002 to December 31, 2011, and analyzed the photographic sunspot data obtained in 1,965 days. The correction factor $K_b$ for the entire observing period is 0.9519, which is calculated using the linear least square method to the relationship between the daily sunspot number, $R_B$, and the daily international relative sunspot number, $R_i$. The yearly correction factor calculated for each year varies slightly from year to year and shows a trend to change along the solar cycle. The correction factor is larger during the solar maxima and smaller during the solar minima in general. This implies that the discrepancy between a relative sunspot number, R, and the daily international relative sunspot number, $R_i$, can be reduced by using a yearly correction factor. From 2002 to 2008 in solar cycle 23, 35.4% and 64.6% of sunspot groups and 35.1% and 64.9% of isolated sunspots in average occurred in the northern hemisphere and in the southern hemisphere, respectively, and from 2008 to 2011 in solar cycle 24, 61.3% and 38.7% of sunspot groups and 65.0% and 35.0% of isolated sunspots were observed, respectively. This result shows that the occurrence frequency for each type of sunspot group changes along the solar cycle development, which can be interpreted as the emerging and decaying process of sunspot groups is different depending on the phase of solar cycle. Therefore, it is considered that a following study would contribute to the efforts to understand the dependence of the dynamo mechanism on the phase of solar cycle.

• 산업공학
• /
• 제25권2호
• /
• pp.241-254
• /
• 2012

This paper studies the relationship between SCM(Supply Chain Management) metrics and corporate value (Tobin's Q) for manufacturing and wholesale/retail firms in Korea. Specifically, the multiple regression analysis is used to investigate the relationships 1) between inventory level, inventory turns, and days of inventory and Tobin's Q and 2) between cash-to-cash (C2C) cycle time including its components such as days of inventory, days sales outstanding, and days payable outstanding and Tobin's Q. The results indicate that there exist statistically significant negative relationships between inventory levels and days of inventory (DOI) and Tobin's Q. Also, we found that there exist commonly known negative correlations between days of raw materials inventory and days of work in process (WIP) inventory and Tobin's Q. For the C2C cycle time, we found that there -exists a statistically significant negative relationship between the C2C cycle time and Tobin's Q. Also, we found that there exist commonly known correlations between the two components of C2C cycle time and Tobin's Q such as the negative for DOI and days sales outstanding. This study clearly shows the negative relationship in general between inventory levels and corporate value and between C2C time and corporate value, and this kind of result has not been found by previous studies in Korea.

• Structural Engineering and Mechanics
• /
• 제32권3호
• /
• pp.459-475
• /
• 2009

This paper presents analytical methodologies for remaining life prediction of plain concrete structural components considering tension softening and size effects. Non-linear fracture mechanics principles (NLFM) have been used for crack growth analysis and remaining life prediction. Various tension softening models such as linear, bi-linear, tri-linear, exponential and power curve have been presented with appropriate expressions. Size effect has been accounted for by modifying the Paris law, leading to a size adjusted Paris law, which gives crack length increment per cycle as a power function of the amplitude of a size adjusted stress intensity factor (SIF). Details of tension softening effects and size effect in the computation of SIF and remaining life prediction have been presented. Numerical studies have been conducted on three point bending concrete beams under constant amplitude loading. The predicted remaining life values with the combination of tension softening & size effects are in close agreement with the corresponding experimental values available in the literature for all the tension softening models.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1051-1060
• /
• 2000

Linear cyclic systems (LCS's) are a class of systems whose dynamic behavior changes cyclically. Such cyclic behavior is ubiquitous in systems with fundamentally repetitive motions (e. g. all rotating machinery). Yet, the knowledge of the noise and vibration transmission paths in LCS's is quite limited due to the time-varying nature of their dynamics. The first part of this two-part paper derives a generic expression that describes how the noise and/or vibration are transmitted between two (or multiple) locations in the LCS's. An analysis via the Fourier series and Fourier transform (FT) plays a major role in deriving this expression that turns out to be transfer function dependent upon the cycle position of the system. The cyclic nature of the LCS' transfer functions is shown to generate a series of amplitude modulated input signals whose carrier frequencies are harmonic multiples of the LCS' fundamental frequency. Applicability of signal processing techniques used in the linear time-invariant systems (LTIS's to the general LCSs is also discussed. Then, a criterion is proposed to determine how well a LCS can be approximated as a LTIS. In Part II, experimental validation of the analyses carried out in Part I is provided.