• Journal of Radiation Protection and Research
• /
• v.23 no.1
• /
• pp.17-23
• /
• 1998

Dose response relationships for one of biological end-points (gene mutation) in somatic cells of Tradescantia 4430 clones were studied using neutrons coming out of a californium-252 isotopic source. And the relative biological effectiveness (RBE) of neutrons in relation to X-rays in the induction of TSH pink mutations was assessed. Inflorescences were irradiated with X-ray from X-ray generator and neutrons from $^{252}Cf$ source. Irradiated cuttings were incubated with aeration in neutrient solution under the controlled condition. For more than 4 weeks after irradiation cell mutations were scored. Pink mutation frequencies were calculated from the pooled data for the peak interval (days 6 to 13 post-irradiation). Somatic cell mutations in TSH showed linear dose response relationships in the range of neutron doses available for the experiment. The RBE values estimated for neutrons in relation to X-rays were in the range 3.1 to 6.8, which were much lower than normally recognized value.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.272-281
• /
• 1993

State varibles were estimated for fermentations of K. marxianus under various dilution rates and dissolved oxygen concentrations. The number of elementary reaction stoichiometry with fixed coefficients was determined by singular variable decomposition. Stoichiometry with feasible physical meaning was obtained by target factor analysis. States of fermentations were estimated by linear quadratic programming. The process conditions of single cell production to maximize carbon source consumption were suggested.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.98-99
• /
• 2011

300 mm급 선형 이온원의 방전 간격에 따른 방전 및 이온빔 인출 특성 변화를 연구하였다. 방전 간격이 2 mm 에서 3 mm로 증가함에 따라 동일 방전 전압에서 방전 전류가 약 20% 증가하였으며, 이는 방전 공간 내 플라즈마 발생 증가에 의한 것임을 object oriented particle in cell 전산모사를 통해 확인하였다.

• Korean Journal of Agricultural Science
• /
• v.21 no.1
• /
• pp.60-66
• /
• 1994

Among the various bacterial isolates from municipal sewages which utilized linear alkylbenzene sulfonate (LAS) as a sole source of carbon. 3 potent strains - KL-3, SH-2 and EN-1 - were selected. The strains were classified: KL-3 as a strain belong to the genus Klebsiella; SH-2 Shigella; and EN-1 Enterobacter, respectively. They were grown in a broth containing 200 ppm of LAS, using a laboratory scale fermentor: the bacterial growth reached stationary phase after 2 days with a maximum viability of $10^8cfu/mL$ of the culture; initial rates of LAS degradation were high during the first 24 hours of cultivation (KL-3 and SH-2, approx. 50%; EN-1, 20%); after 1 day a lag period of about 24 hours was observed for all the strains, and thereafter break-down proceeded rapidly; final rates after 7 days were approximately 85% by KL-3, 82% by SH-2 and 75% by EN-1. Adsorption of LAS by the bacterial cell mass was high for the strain SH-2, as Freundlich equation: Y= 0.030X + 0.95 was calculated.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.451-458
• /
• 2009

Purpose: Optical molecular luminescence imaging is widely used for detection and imaging of bio-photons emitted by luminescent luciferase activation. The measured photons in this method provide the degree of molecular alteration or cell numbers with the advantage of high signal-to-noise ratio. To extract useful information from the measured results, the analysis based on a proper quantification method is necessary. In this research, we propose a quantification method presenting linear response of measured light signal to measurement time. Materials and Methods: We detected the luminescence signal by using lab-made optical imaging equipment of animal light imaging system (ALIS) and different two kinds of light sources. One is three bacterial light-emitting sources containing different number of bacteria. The other is three different non-bacterial light sources emitting very weak light. By using the concept of the candela and the flux, we could derive simplified linear quantification formula. After experimentally measuring light intensity, the data was processed with the proposed quantification function. Results: We could obtain linear response of photon counts to measurement time by applying the pre-determined quantification function. The ratio of the re-calculated photon counts and measurement time present a constant value although different light source was applied. Conclusion: The quantification function for linear response could be applicable to the standard quantification process. The proposed method could be used for the exact quantitative analysis in various light imaging equipments with presenting linear response behavior of constant light emitting sources to measurement time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.1063-1071
• /
• 1999

Fine grid calculations are reported for the developing turbulent flow in a curved duct of square cross-section with a radius of curvature to hydraulic diameter ratio ${\delta}=Rc/D_H=3.357 $ and a bend angle of 720 deg. A sequence of modeling refinements is introduced; the replacement of wall function by a fine mesh across the sublayer and a low Reynolds number algebraic second moment closure up to the near wall sublayer in which the non-linear return to isotropy model and the cubic-quasi-isotropy model for the pressure strain are adopted; and the introduction of a multiple source model for the exact dissipation rate equation. Each refinement is shown to lead to an appreciable improvement in the agreement between measurement and computation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.208-208
• /
• 2011

최근 유연기판 기술을 기반으로 대면적 roll to roll 공정기술 개발이 활발히 연구됨에 따라 이에 적용 가능한 대면적 플라즈마 소스의 중요성이 대두되고 있다. 대면적 플라즈마 처리 공정에 적용 가능한 소스 중 closed drift 타입의 선형 이온 소스는 제작 및 대면적화가 용이함에 따라 다양한 산업 분야에서 사용되고 있다. 선형 이온 소스를 다양한 표면처리 공정에 효과적으로 적용하기 위해서는 방전 특성에 대한 이해를 바탕으로 각 공정에 맞는 이온빔 전류 밀도, 방전 전압 등의 방전 인자 조절이 필수적이다. 본 연구에서는 표면 개질, 식각 및 박막 증착 등의 다양한 분야에 활용 가능한 선형 이온 소스를 개발하였으며, 선형 이온 소스를 통한 표면 식각 공정을 집중적으로 연구하였다. 전극 및 자기장 구조에 따른 선형 이온 소스 내 플라즈마 방전거동 분석을 위해 object oriented particle in cell(OOPIC) 전산모사를 수행하였으며, 이를 통해 식각 또는 증착 공정에 적합한 이온 소스의 구조 및 공정 조건을 예측하였다. 또한 OOPIC 전산모사를 통해 예측된 이온빔 인출 경향을 Faraday cup을 이용한 이온빔 전류 밀도 측정을 통해 확인하였다. 실리콘 기판 식각 공정의 경우, 이온 전류밀도 및 에너지에 따른 식각 거동 분석, 이온빔 입사각 변화에 따른 식각 특성 분석을 통해 최적 식각 공정 조건을 도출하였다. 특히, 이온빔 입사각 변화에 따른 식각률 변화는 일반적으로 알려진 입사각에 따른 스퍼터링율과 유사한 경향을 보였다. 이온빔 에너지 3 kV, Ar 압력 1.3 mTorr 조건에서 기판 정지 상태시 약 8.5 nm/s의 식각 속도를 얻었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.6
• /
• pp.2046-2056
• /
• 1996

The constrained melting inside an isothermally heated horizontal cylinder has been repeatedly investigated in many studies only for the moderate Rayleigh numbers. This study extends the range of Rayleigh numbers to systematically investigate the transition during melting processes, especially focusing on the complex multi-cellular flow pattern and thermal instability. The enthalpy-porosity formulation, with appropriate source terms to account for the phase change, is employed. For low Rayleigh numbers, initially developed single-cell base flow keeps the flow stable. For moderate Rayleigh numbers, even small disturbances in balance between thermal buoyance force and viscous force result in branched flow structure. For high Rayleight numbers, Benard type convection is found to develop within a narrow gap between thee wall and the unmelted solid. The marginal Rayleigh number and the corresponding wave number are in excellent agreement with those from linear stability theory.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3383-3387
• /
• 2023

A new dyed polyvinyl alcohol (PVA) film dosimeter based on 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MMT) tetrazolium dye is proposed in this study for measuring high gamma radiation dose. Gamma cell irradiator that contains Co-60 gamma-ray source was used to expose the novel MMT-PVA films to different doses up to 25 kGy. The changed in optical property of irradiated and unirradiated films were characterized by UV-Vis spectrophotometer. The results show that the dose sensitive and the linear range of irradiated films were increased considerably with increase of MMT concentration from 1 to 5 mM. The dose response of dyed PVA film changed substantially with changing relative humidity (12-74%) as well as irradiation temperature (10-40 ℃). The absorbance of the unirradiated films does not change up to 10 days in dark while a significant increase in their absorbance was reported for similar films under fluorescent light. The irradiated dosimeters that kept in dark showed a perfect stability for 54 days. It was found that no obvious impact of dose rate on the irradiated MMT-PVA film dosimeters.

• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.788-793
• /
• 2016

Post-weaning diarrhea (PWD), mostly caused by enterotoxigenic Escherichia coli (ETEC), remains to be a major source of economic loss in swine industry. The use of the ETEC-oral challenge model is often applied to mimic unsanitary commercial swine farm conditions where pathogens and unknown complex microbes exist and can cause severe infections in pigs. The purpose of this study was (1) to estimate ETEC density using spectrophotometric computation, (2) to determine survivability of ETEC after storing at $-20^{\circ}C$ for 7 days, and (3) to evaluate survivability of ETEC after blending with diluted sweeteners (0, 5, 10, 20, and 40% sucrose in phosphate buffered saline [PBS]). Cell density was quantified using UV-VIS spectrophotometer and counting ETEC colony forming units (cfu) at 0, 30, 60, 90, 120, 150, 180, 210, and 240 min. The established linear equation ($y=0.0031x^2-0.0079x+0.0043$ and $y=0.0046x^2-0.0151x+0.0113$) was used for robust quantification of each ETEC cell density. ETEC stored at $-20^{\circ}C$ showed 108 cfu/mL after thawing and incubation. When ETEC was blended with sweeteners (20 and 40%), survival of ETEC was decreased by 58 and 54% in 5 min post blending. However, addition of 20% of sweetener resulted in a higher survivability than those with other media concentrations. Therefore, the use of ETEC-oral challenge model would be possible as a stable method if we could confirm the appropriate medium that increases survivability of ETEC in weaner pigs.