• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.45-50
• /
• 2008

Molecular flows inside a guide block in the OLED(organic luminescent emitting device) deposition process have been simulated using DSMC(direct simulation Monte Carlo) method. Because the organic materials are evaporated under vacuum, molecules flow at a high Knudsen number of the free molecular regime, where the continuum mechanics is not valid. A guide block is designed as a part of the linear cell source to transport the evaporated materials to a deposition chamber, When solving the flows, the inlet boundary condition is proved to affect significantly the whole flow pattern. Thus, it is proposed that the pressure should be specified at the inlet. From the analysis of the density distributions at the nozzle exit of the guide block, it is shown that the longer nozzle can emit molecules more straightly. Finally, a nondimensionalized mass flow profile is obtained by numerical experiments, where various nozzle widths and inlet pressures are tested.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.162-167
• /
• 2012

This paper describes the design of a high-performance unified SVM classifier circuit. The proposed circuit supports both linear and non-linear SVM classifications. In order to ensure efficient classification, a 48x96 or 64x64 sliding window with 20 window strides is used. We reduced the circuit size by sharing most of the resources required for both types of classification. We described the proposed unified SVM classifier circuit using the Verilog HDL and synthesized the gate-level circuit using 65nm standard cell library. The synthesized circuit consists of 661,261 gates, operates at the maximum operating frequency of 152 MHz and processes up to 33.8 640x480 image frames per second.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.379-386
• /
• 2001

The lower toughness or brittle materials for mechanical test lead to the additional requirement that applied displacements be controlled with high resolution. Biaxial tension and shear tester using stepper motor with harmonic driver is shown. The device had to be high resolution so that the crack initiation process of slow extension and steady growth could be examined, Grip plates were connected to a linear bearing and actuator. The actuators consisted of stepper motors with harmonic driver connected to pre-loaded ball screw and nut assemblies. The encoders and motor controllers were connected to a personal computer so that arbitrary displacements histories could he prescribed in normal and tangential directions. The linear bearings were used to react loads perpendicular to their axes while allowing low friction, parallel movement of the attached grips. Load cells measured the reactions normal and tangential. the loads measured the reactions were recorded by the computer.

• ETRI Journal
• /
• v.41 no.6
• /
• pp.731-738
• /
• 2019

We proposed a novel electromagnetic band-gap (EBG) cell-embedded antenna structure for reducing the interference that radiates at the antenna edge in wireless access in vehicular environment (WAVE) communication systems for vehicle-to-everything communications. To suppress the radiation of surface waves from the ground plane and vehicle, EBG cells were inserted between micropatch arrays. A simulation was also performed to determine the optimum EBG cell structure located above the ground plane in a conformal linear microstrip patch array antenna. The characteristics such as return loss, peak gain, and radiation patterns obtained using the fabricated EBG cell-embedded antenna were superior to those obtained without the EBG cells. A return loss of 35.14 dB, peak gain of 10.15 dBi at 80°, and improvement of 2.037 dB max at the field of view in the radiation beam patterns were obtained using the proposed WAVE antenna.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.10a
• /
• pp.4-4
• /
• 1996

• Communications for Statistical Applications and Methods
• /
• v.7 no.3
• /
• pp.687-698
• /
• 2000

An identification method is proposed in order to detect more than one outlying cells in multi-way contingency tables. The iterative proportional fitting method is applied to get expected values of several suspected outlying cells. Since the proposed method uses minimal sufficient statistics under quasi log-linear models, expected counts of outlying cells could be estimated under any hierarchical log-linear models. This method is an extension of the backwards-stepping method of Simonoff(1988) and requires les iteration to identify outlying cells.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.673-676
• /
• 2016

Background: In the maxillofacial region, giant cell granulomas occur in 2 clinical forms, central and peripheral. Despite histopathological similarity between these 2 forms totally different clinical behaviors have been reported. The present study was undertaken to compare mast cell and vascular concentrations in these pathologic lesions. Materials and Methods: In this cross-sectional descriptive study, 20 pathological samples of central giant cell granuloma (CGCG) and 20 samples of peripheral giant cell granuloma (PGCG) were selected and examined through toluidine blue staining for mast cell assessment and immunohistochemical staining by VEGEF antibody for comparing the number of mast cells. T-test, chi-squared test and backward multivariate linear regression were used for statistical analysis using SPSS 20. Statistical significance was set at P<0.05. Results: This study showed significantly greater VEGF expression and mast cell concentrations in CGCG compared to PGCG cases. Also there was a significant correlation between VEGF expression and the concentration of mast cells. No relation was found between age, sex and site of the lesion and concentration of mast cells or VEGF expression. Conclusions: It is feasible that higher concentrations of mast cells in CGCG versus PGCG samples might lead to more aggressive clinical behavior via vascular proliferation and angiogenesis. However, other biologic mechanisms should be considered in this situation.

• Current Research on Agriculture and Life Sciences
• /
• v.11
• /
• pp.55-59
• /
• 1993

The packed cell volume(PCV) of Korean native goat, volume percentage of red blood cell in whole blood, was reshuffled of 20%, 40% and 60% using autoplasma, and erythrocyte sedimentation rate was measured in Westergren tubes at room temperature ($27{\pm}1^{\circ}C$) and low temperature ($8{\pm}1^{\circ}C$). The sedimentation rates of red blood cell obtained are summarized as follows. The erythrocyte sedimentation rates of Korean native goat are accelerated more at high temperature than low temperature. The erythrocyte sedimentation rates of reshuffled Korean native goat upon time are almost linear for several hours. The erythrocyte sedimentation rates of Korean native goat are settled faster at low PCV than higher PCV, i. e., there is a reverse relationshif between the erythrocyte sedimentation rate and packed cell volume.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.37-42
• /
• 2009

The performance of an OLED(organic luminescent emitting device) fabrication system strongly depends on the design of the evaporation cell-source. Trends in display sizes have hauled the enlargement of mother glass substrates. The enlargement of substrates requires the improvement and the enlargement of the effusion cell-source for OLED evaporation process. The deposited layers should be as uniform as possible, and therefore it is important to know the effusion profile of the molecules emitted from the cell-source. Conventional 2D DSMC algorithm cannot be used for simulating the new concept cell-source design, such as a linear source. This work concerns the development of 3D DSMC (direct simulation Monte Carlo) analysis for simulating the behavior of the evaporation cell-sources. In this paper, the 3D DSMC algorithm was developed and the film thickness profiles were obtained by the numerical analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2086-2097
• /
• 2012

A terminal-based dynamic clustering algorithm is proposed in a multi-cell scenario, where the user could select the cooperative BSs from the predetermined static base stations (BSs) set based on dynamic channel condition. First, the user transmission rate is derived based on linear precoding and per-cell feedback scheme. Then, the dynamic clustering algorithm can be implemented based on two criteria: (a) the transmission rate should meet the user requirement for quality of service (QoS); (b) the rate increment exceeds the predetermined constant threshold. By adopting random vector quantization (RVQ), the optimized number of cooperative BSs and the corresponding channel conditions are presented respectively. Numerical results are given and show that the performance of the proposed method can improve the system resources utilization effectively.