• Economic and Environmental Geology
• /
• v.19 no.1
• /
• pp.35-55
• /
• 1986

The area of this study is located in the Sang dong district, Youngwol Gun, Kangwon Do, where the Ogcheon fold belt comes into contact with the Ryongnam massif. The area is covered by the Precambrian metasedimentary rocks of Yulri Group in the south from the line of Ungyosan-Maebongsan-Jansan-Taebaegsan Mountains and by the Cambro-Ordovician sedimentary rocks of Choseon Supergroup in the north. The Choseon Supergroup unconformably overlies the Yulri group. Several granitic intrusives occur in the Precambrian and Cambro-Ordovician terrain. The purpose of this study is to clarify the geochronology, mineralogical composition, geochemical characteristics, petrogenesis and tectonic settings of the Precambrian granitic rocks, and to evaluate the P.T. conditions of granitic intrusions. The K/Ar ages obtained from the muscovite of Nonggeori Granite, Naedeogri granite and pegmatite intruded into the Yulri Group are Early Proterozoic ($1805{\pm}18Ma$ to $1642{\pm}23Ma$), and those from the migmatitic pegmatite are Late Carboniferous ($305{\pm}4Ma$), respectively. The Precambrian granitic rocks are characterized by the presence of muscovite, tourmaline and grey feldspar with faint lineation of mafic minerals. In terms of mineralogical and chemical composition, the granitic rocks are felsic, calc-alkalic, peraluminous and S-type (ilmenite-series). The geochemical characteristics of major and trace elements indicate that the granitic rocks belong to syn-collision setting at the compressional plate margin. They were formed by progressive melting of relatively homogeneous crustal materials under 1~3kb and $670^{\circ}{\sim}720^{\circ}C$ in aqueous fluid conditions, and the Naedeogri granite was more fractionated than the Nonggeori granite. During the Taebaeg disturbance, Nonggeori granite, Naedeogri granite and pegmatite were intruded and emplaced into the Yulri Group. Migmatitic pegmatite occurring in the southwestern area, however, gave much younger muscovite age than the pegmatite intruded into the Yulri Group in rest of the area did, that might be due to the regional metamorphism of the Post-Choseon disturbance. The Geodo granitic mass and the Imog granite were intruded during the Bulgugsa disturbance.

• Journal of Educational Research in Mathematics
• /
• v.14 no.1
• /
• pp.19-37
• /
• 2004

In school mathematics, polygon and polyhedron are defined by vague terms such as "surrounded" or "formed" Moreover, the inclusion of boundary and interior in the definition of polygon and polyhedron is varied according to the context. Polygon and polyhedron are considered as "context-dependent concept" in school mathematics. Elementary school mathematics introduces a surface only in the context of solid, yet secondary school mathematics explains a surface as the trace of the line movement. From the perspective of fallabilism, it is possible and desirable to lead students to revise and improve their conceptions on polygon, polyhedron, and surface. It is more appropriate to name a face, an edge, and a vertex rather than to express a face of polyhedron, an edge of polyhedron, and a vertex of polyhedron in textbooks. The term "surface as a polygon" in secondary mathematics textbooks shows a conflict between intuitive approach in elementary school and logical approach in secondary school.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.1-6
• /
• 2016

The Internet of Things (IoT) is a new technology paradigm demanding one packaged system of various semiconductor and MEMS devices. Therefore, the development of electronic packaging technology with very high connectivity is essential for successful IoT applications. This paper discusses both fan-out wafer level packaging (FOWLP) and 3D stacking technologies to achieve the integrattion of heterogeneous devices for IoT. FOWLP has great advantages of high I/O density, high integration, and design flexibility, but ultra-fine pitch redistribution layer (RDL) and molding processes still remain as main challenges to resolve. 3D stacking is an emerging technology solving conventional packaging limits such as size, performance, cost, and scalability. Among various 3D stacking sequences wafer level via after bonding method will provide the highest connectivity with low cost. In addition substrates with ultra-thin thickness, ultra-fine pitch line/space, and low cost are required to improve system performance. The key substrate technologies are embedded trace, passive, and active substrates or ultra-thin coreless substrates.

• Journal of KIISE:Databases
• /
• v.33 no.1
• /
• pp.56-68
• /
• 2006

For tracing tag locations, the trajectories should be modeled and indexed in radio frequency identification (RFID) systems. The trajectory of a tag can be represented as a line that connects two spatiotemporal locations captured when the tag enters and leaves the vicinity of a reader. If a tag enters but does not leave a reader, its trajectory is represented only as a point captured at entry. Because the information that a tag stays in a reader is missing from the trajectory represented only as a point, it is impossible to find the tag that remains in a reader. To solve this problem we propose the data model in which trajectories are defined as time-parameterized intervals and new index scheme called the Time Parameterized Interval R-tree. We also propose new insert and split algorithms that reduce the area of nodes to enable efficient query processing. We evaluate the performance of the proposed index scheme and compare it with previous indexes on various datasets.

• Journal of Surface Science and Engineering
• /
• v.32 no.3
• /
• pp.239-243
• /
• 1999

At Present, 200mm wafer technology is being applied for commercial fabrications of 64, 128, and 256 M DRAM devices, and 300mm technology will be evolved for 1G DRAM devices in the early 21th century, recognizing limitations of several process technologies. In particular recognition has been realized in harmful effects of surface contamination of trace metals introduced during devicing processes. Such a guide line for surface metal contamination has been proposed as 1E9 and 1E10 atoms/$\textrm{cm}^2$ of individual metal contamination for wafering and devicing of 1G DRAM, respectively, and so its measurement limit should be at least 1E8 atoms/$\textrm{cm}^2$. The detection limit of present measurement systems is 2E9 atoms/$\textrm{cm}^2$ obtainable with TRXFA(Total Reflection X-Ray Fluorescence Analysis). TRXFA is nondestructive and the simplest in terms of operation, and it maps the whole wafer surfaces but needs detection improvement. X-Ray intensity produced with synchrotron accelerator is much higher than that of conventional X-ray sources by order of 4-5 magnitudes. Hence theoretically its reactivity with silicon surfaces is expected to be much higher than the conventional one, realizing improvement of detection limit. X-ray produced with synchrotron accelerator is illuminated at a very low angle with silicon wafer surfaces such as 0.1 degree and reflects totally. Hence informations only from surface can be collected and utilized without overlapping with bulk informations. This study shows the total reflection phenomenon and quantitative improvement of detection limit for metallic contamination. It is confirmed that synchrotron X-ray can be a very promising alternative for realizing improvement of detection limit for the next generation devices.

• Advances in concrete construction
• /
• v.5 no.5
• /
• pp.451-468
• /
• 2017

The problem of reducing the self-weight of reinforced concrete structures is very important issue. There are two approaches which may be used to reduced member weight. The first is tackled through reducing the cross sectional area by using voids and the second through using light weight materials. Reducing the weight of slabs is very important as it constitutes the effective portion of dead loads in the structural building. Eleven slab specimens was casted in this research. The slabs are made one way though using two simple supports. The tested specimens comprised three reference solid slabs and eight styropor block slabs having (23% and 29%) reduction in weight. The voids in slabs were made using styropor at the ineffective concrete zones in resisting the tensile stresses. All slab specimens have the dimensions ($1100{\times}600{\times}120mm$) except one solid specimens has depth 85 mm (to give reduction in weight of 29% which is equal to the styropor block slab reduction). Two loading positions or cases (A and B) (as two-line monotonic loads) with shear span to effective depth ratio of (a/d=3, 2) respectively, were used to trace the structural behavior of styropor block slab. The best results are obtained for styropor block slab strengthened by minimum shear reinforcement with weight reduction of (29%). The increase in the strength capacity was (8.6% and 5.7%) compared to the solid slabs under loading cases A and B respectively. Despite the appearance of cracks in styropor block slab with loads lesser than those in the solid slab, the development and width of cracks in styropor block slab is significantly restricted as a result of presence a mesh of reinforcement in upper concrete portion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.507-513
• /
• 2021

This study examined the final stop position and posture of both vehicles, the damaged part of the vehicle, the road surface, the specifications of the vehicle, and the angle of impact, centering on the case of a collision in which no surface trace was found. As a result of the simulation, the impact velocity of an SM5 and Lexus was 131 km/h and 74 km/h, respectively, and the impact angle of the SM5 and Lexus was 0.91° and -161.07°, respectively. The cause of the accident was that the SM5 passed through the intersection exceeding the maximum speed limit of 61 km/h and entered the Lexus' left turn lane. Lexus collided during the evacuation to avoid the collision. The collision trajectory error rate of the simulation was approximately 1.4%. Of the subjective experience of accident investigators, the collision dynamics and vehicle engineering aspects and simulations were actively utilized to provide close-to-fact cause identification.

• Journal of Information Technology Services
• /
• v.21 no.2
• /
• pp.97-107
• /
• 2022

Recently, interest in smart factories is increasing. Investments to improve intelligence/automation are also being made continuously in manufacturing plants. Facility automation based on sensor data collection is now essential. In addition, we are operating our factories based on data generated in all areas of production, including production management, facility operation, and quality management, and an integrated standard information system. When producing LCD polarizer products, it is most important to link trace information between data generated by individual production processes. All systems involved in production must ensure that there is no data loss and data integrity is ensured. The large-capacity data collected from individual systems is composed of key values linked to each other. A real-time quality analysis processing system based on connected integrated system data is required. In this study, large-capacity data collection, storage, integration and loss prevention methods were presented for optimization of LCD polarizer production. The identification Risk model of inspection products can be added, and the applicable product model is designed to be continuously expanded. A quality inspection and analysis system that maximizes the yield rate was designed by using the final inspection image of the product using big data technology. In the case of products that are predefined as analysable products, it is designed to be verified with the big data knn analysis model, and individual analysis results are continuously applied to the actual production site to operate in a virtuous cycle structure. Production Optimization was performed by applying it to the currently produced LCD polarizer production line.

• Geomechanics and Engineering
• /
• v.31 no.5
• /
• pp.439-452
• /
• 2022

A forecast of slope behavior during catastrophic events, such as earthquakes is crucial to recognize the risk of slope failure. This paper endeavors to eliminate the significant supposition of predefined slip surfaces in the slope stability analysis, which questions the relevance of simple conventional methods under seismic conditions. To overcome such limitations, a methodology dependent on the slip line hypothesis, which permits an automatic generation of slip surfaces, is embraced to trace the extreme slope face under static and seismic conditions. The effect of earthquakes is considered using the pseudo-static approach. The current outcomes developed from a parametric study endorse a non-linear slope surface as the extreme profile, which is in accordance with the geomorphological aspect of slopes. The proposed methodology is compared with the finite element limit analysis to ensure credibility. Through the design charts obtained from the current investigation, the stability of slopes can be assessed under seismic conditions. It can be observed that the extreme slope profile demands a flat configuration to endure the condition of the limiting equilibrium at a higher level of seismicity. However, a concurrent enhancement in the shear strength of the slope medium suppresses this tendency by offering greater resistance to the seismic inertial forces induced in the medium. Unlike the traditional linear slopes, the extreme slope profiles mostly exhibit a steeper layout over a significant part of the slope height, thus ensuring a more optimized solution to the slope stability problem. Further, the susceptibility of the Longnan slope failure in the Huining-Wudu seismic belt is predicted using the current plasticity approach, which is found to be in close agreement with a case study reported in the literature. Finally, the concept of equivalent single or multi-tiered planar slopes is explored through an example problem, which exhibits the appropriateness of the proposed non-linear slope geometry under actual field conditions.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.3
• /
• pp.105-121
• /
• 2020

There has been a lot of controversy over the claim that ancient characters were engraved on a stone plane collected near the Samsin Mountain in Hadong-gun, and that it was used as an altar based on the contents on the stone. The importance of the role of geoscience in prehistoric petroglyph research was presented through analysis and comparison with representative domestic petroglyphs. First, by examining the geological formation process of the collected stone objects, it proved that prehistoric actions were not applied. Second, as a result of comparative analysis from the viewpoints of human geography and topography with representative petroglyphs in Korea, it is unreasonable to argue that the stone was made for an altar. Third, it is considered that among the ancient characters under debate, the straight line indicates a cleavage of carbonate minerals, and the curved shape results from the growth of lichens. Finally, we propose that reproducing the lines found on the stone was impossible by using ancient techniques, and that there was no trace of any artificial actions applied to the spots considered to be curved characters. As shown in such research cases, the results of petroglyph research will have high reliability, if research by experts in each field continues after the geoscientific basis is secured. In this respect, the contribution of Earth science to cultural assets and archeology is expected to increase in the future.